Abstract:The thermal stability of an yttria particle dispersion strengthening tungsten (W-2vol%Y2O3) plate with 67 % rolling thickness reduction (WY67) fabricated by powder metallurgy and warm rolling is investigated through isochronous annealing and isothermal annealing. Hardness testing of annealed specimens allows tracking the degradation of the mechanical properties and electron backscatter diffraction (EBSD) was used to characterize the corresponding microstructure. Isochronous annealing for 1 hour between 1150 °C and 1450 °C indicates that the recrystallization temperature of WY67 is about 1400 °C. Herein, the recovery kinetics, recrystallization kinetics, and the evolution of microstructure and texture of WY67 during isothermal annealing at temperatures ranging from 1300 ℃ to 1450 ℃ were investigated in detail. The effect of both the heterogeneity of the deformed microstructure and the yttria particles on the recovery and recrystallization was further studied. The results show that the stored energy of the deformed grains of yttria dispersion strengthened tungsten is texture-dependent and the grain with γ-fiber (normal direction // <111>) texture has the largest stored energy of 546 KJ/m3. The grains with higher stored energy are conducive to recrystallized nucleus/grain growth rather than nucleation during subsequent annealing. The recrystallized texture inherits the deformed texture and is mainly composed of γ-fiber texture. There are more pre-existing potential recrystallization nuclei in the elongated grains with larger deformation in the as-rolled microstructure. Micron-sized yttria particles can stimulate the formation of recrystallization nuclei through particle-stimulated nucleation mechanism, nevertheless, this is not the dominant nucleation mode for WY67 during recrystallization in this study. Fine (submicron) yttria particles hinder the recovery and recrystallization processes through the Smith–Zener pinning effect.

Impurity-induced microstructural uniformity by narrowing stored energy difference between {111} and {100} grains in rolled W

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Impurity effect on recrystallization and grain growth in severe plastically deformed copper

Inhomogeneous Deformation Substructure and Its Effect on the Recrystallization Behavior of Yttria Dispersion-Strengthened Tungsten Plate

Enhanced Tensile Ductility of Tungsten Microwires Via High-Density Dislocations and Reduced Grain Boundaries

Microstructure and Annealing Behavior of Three Rolled Pure Tungsten Plates with Different Thickness Reduction

Orientation relationship of texture development in hot-rolled W during annealing

Deformation Mechanism of Metastable Oriented Grains in High-Purity Tantalum under Different Strain Paths

Microstructure and texture evolution in warm-rolled fine-grained tungsten

Microstructure evolution of the rolled tungsten during the current-assisted annealing treatment

Recovery and Recrystallization as a Function of Deformed Microstructure Orientation in Coarse Grained Cold-Rolled Ni

Dislocation slips assisted grain rotation and specific texture evolution in a CoCrNi medium entropy alloy

Delving into the intrinsic co-relation between microstructure and mechanical behaviour of fine−/ultrafine-grained TWIP steels via TEM and in-situ EBSD observation

Evolution of microstructure and texture of moderately warm-rolled pure tungsten during annealing at 1300 °C

Orientation Dependence of the Deformation Microstructure of Ta-4% W after Cold-Rolling

Insight into interface cohesion and impurity-induced embrittlement in carbide dispersion strengthen tungsten from first principles

Recrystallization behavior of pure tungsten hot-rolled with high accumulated strain during annealing at 1250 C-1350 C

Investigation of Grain Boundary and Orientation Effects in Polycrystalline Metals by a Dislocation-Based Crystal Plasticity Model

Effect of Abnormal Grain Refinement on Synchronous Strengthening Behavior of Fe50Mn30Co10Cr10 High Entropy Alloys

Deformation And Annealing Textures Of Extruded And Cold Rolled Pure Ni Single Crystals Of Cube Orientation

Restoration kinetics and microstructural evolution of moderately warm-rolled yttria dispersion-strengthened tungsten plate during annealing at high temperatures