Abstract:Properties of SiC coating layer in the postulated accident condition of air and water ingress is crucial to the in-pile safety of tristructural-isotropic (TRISO) coated fuel particles of high temperature gas-cooled reactors (HTR). Particles of ZrO2 kernels coated with low-density pyrolytic carbon buffer layer, high-density pyrolytic carbon layer and SiC layer fabricated by fluidized-bed chemical vapour deposition (FBCVD) were used to simulate real fuel particles in this research. The coated particles were tested at 1673 K in a certain flowing air with different water content between 0 and 100 g/m(3) for 10 h. Analysis results show that the corrosion reaction took place mainly on the outer surface of SiC layer with changing infiltration depth according to the flowing gas compositions. Steam content was controlled according to the relationship between saturated water vapour pressure and environment temperature. SiO2 layer was the main product formed on the surface with thickness increase from 1.5 mu m to 3 mu m along with the content of water vapour in air. Formation of two types of micro-cracks after oxidation are observed: micro-cracks on spherulitic SiO2 and penetrating micro-cracks on flat SiO2. Micro-stress generation mechanism is illustrated. Three are also some bubbles are observed either in SiO2 layer or between SiO2 and SiC layers. Results showed that no fracture occurred in the SiC layer after wet oxidation.

The cause of foaming in polishing porcelain stoneware tile residues during sintering: Interface corrosion of Silicate-SiC

Foaming mechanism of polishing porcelain stoneware tile residues via adding C, Al and Si powder

Fabrication of foamed ceramics with enhanced compressive strength and low thermal conductivity via a simple route

Effect of silicon carbide additive on microstructure and properties of porcelain ceramics

Foaming Inhibition of SiC-containing Porcelain Ceramics by Using Si Powders During Sintering

Effect of silicon carbide particle size and CaO content on foaming properties during firing and microstructure of porcelain ceramics

Effects of magnesium oxychloride and silicon carbide additives on the foaming property during firing for porcelain ceramics and their microstructure

The Oxidation Behavior and Corrosion Mechanism of SiC Matrix Ceramics in a High Temperature Wet Air Environment

Corrosion mechanism of Al2O3–SiC–C refractory by SiO2–MgO-based slag

The Oxidation Resistance Mechanism of SiC-B4C-xAl2O3 Ceramics at 1400 ℃ in Air Atmosphere

Corrosion of SiC layers on coated zirconia particles in wet atmosphere

Wet Oxidation Behavior of Al-Y Synergistic Modified Liquid Phase Sintered SiC

Surface corrosion mechanism of ceramic proppant caused by formation water

Enhanced wet-oxidation resistance of Y2O3 modified SiC ceramics by the formation of Y2Si2O7 protective layer

Effect of Abrasive Particle Size on Anti-Abrasion Performance of Si3N4 Ceramics

Internal Friction Behavior Of Sic Ceramics Subjected To Water Vapor Corrosion

Influence of Ca3(PO4)2 on the Surface Morphology and Properties of a CaO-Al2O3-SiO2-Fe2O3-Based High Temperature Phase Reconstructed Complex

Synthesis of a foam ceramic based on ceramic tile polishing waste using SiC as foaming agent

Improved water vapor corrosion resistance of SiC bricks via in situ formation of microporous Yb2Si2O7 bonding phase

Application and Corrosion Characteristics of Chrome-Free SiC-MgAl2O4 Refractory Linings Serviced in an Entrained Flow Gasifier

Porosity and Oxide Layer Dependence of Thermal Shock Behavior of Porous Silicon Nitride Ceramics