Abstract:Utilizing solid waste to produce foam material has become a significant direction in resource recycling. This study focuses solely on using silicomanganese slag and feldspar tailings as raw materials, utilizing a powder sintering process to produce autocatalytic foaming glass–ceramic foam. We formulated four mix ratios based on the compositional characteristics of the silicomanganese slag and feldspar tailings. The study then explored the evolution of phase formation and macroscopic pore morphology under varying preparation temperatures. Moreover, through multi-phase co-melting experiments, this work unveiled the high-temperature molten mass generation mechanism between silicomanganese slag and feldspar tailings. Our findings reveal that the glass melt generated from silicomanganese slag particles and the 'solid–liquid erosion behavior' of feldspar particles play pivotal roles in the formation of high-temperature co-melt substances. As the sintering temperature increases, the mixed powder exhibits three different states of high-temperature molten mass, which are the reasons for the evolution of the macroscopic pore structure. It is suggested that the addition of silicomanganese slag should be less than 50 %, and the heat treatment temperature should be below 1145 °C in preparing glass–ceramic foam with silicomanganese slag and feldspar tailings. The sample with 40 % silicomanganese slag and 60 % feldspar tailings, treated at 1140 °C, yielded glass–ceramic foam with a compressive strength of 1.68 MPa, apparent density of 0.279 g/cm 3 , porosity of 81.7 %, and thermal conductivity of 0.074 W·m −1 ·K −1 . In summary, this study provides a novel approach for the high-value utilization of silicomanganese slag and offers an economical route for developing lightweight, eco-friendly structural materials.

Synthesis of a foam ceramic based on ceramic tile polishing waste using SiC as foaming agent

Preparation of ceramic foams from ceramic tile polishing waste and fly ash without added foaming agent

Novel Glass Ceramic Foams Materials Based on Polishing Porcelain Waste Using the Carbon Ash Waste As Foaming Agent

Preparation and characterization of ceramic foams mainly containing extracted titanium residues and silica tailings

Reuse of mineral wool waste and recycled glass in ceramic foams

Recycling of Silicomanganese Slag and Fly Ash for Preparation of Environment-Friendly Foamed Ceramics

Fabrication of foamed ceramics with enhanced compressive strength and low thermal conductivity via a simple route

Effects of Ammonium Molybdate Additive and Sintering Temperature on the Properties of Foam Ceramics Based on Ceramic Tile Polishing Waste

Foaming mechanism of polishing porcelain stoneware tile residues via adding C, Al and Si powder

Foaming Inhibition of SiC-containing Porcelain Ceramics by Using Si Powders During Sintering

Fabrication of Pure SiC Ceramic Foams Using SiO2 As a Foaming Agent Via High-Temperature Recrystallization

Preparation and characterization of foam ceramics from red mud and fly ash using sodium silicate as foaming agent

Preparation of Glass-Ceramic Foams Using Extracted Titanium Tailing and Glass Waste As Raw Materials

Synthesis and properties of foam glass-ceramics from granite tailings by using SiC and MnO2 as the mixed foaming agent

Effect of Sic on Microstructures and Properties of Clay Foam Ceramics

Effect of phase evolution and pyroplastic formation behavior on glass-ceramic foam derived from silicomanganese slag and feldspar tailings

Integrated Utilization of Fly Ash and Waste Glass for Synthesis of Foam/dense Bi-Layered Insulation Ceramic Tile

Integrated utilization of high alumina fly ash for synthesis of foam glass ceramic

Utilizing multi-solid waste to prepare and characterize foam glass ceramics

The influence of temperature and SiC content on the recycling of iron ore tailings for the preparation of value-added foam ceramics

Green synthesis of porous SiC ceramics using silicon kerf waste in different sintering atmospheres and pore structure optimization