Abstract:Abstract Due to various characteristics such as high thermal efficiency, inherent safety, passive safety, and hydrogen production for industrial use, the high temperature gas-cooled reactor (HTR) is considered as one of the most promising technologies in the future. Fuel elements are the core part of a reactor. In the existing high-temperature gas cooled reactor HTR, spherical fuel elements are involved, with graphite accounting for more than 90% of the mass and volume of the fuel element. However, graphite is prone to oxidation in oxidizing atmospheres at a higher temperature than 400°C. Regarding the design of future HTR, accident conditions must be taken into consideration. Under the accident conditions of inlet and outlet water, the graphite in the spherical fuel element is easy to be oxidized. This causes damage to the fuel elements and increases the release of fission products, which threatens the safety of HTR. In this study, two-step pack cementation is performed to prepare SiC composite coatings on the surface of graphite spheres with a diameter of 40 mm, which improves the oxidation resistance of graphite spheres. According to research, the thickness of coating is about 150 μm after two-step pack cementation, with SiC and Si as the main phase of the coating. However, it is necessary to improve the density of SiC composite coatings needs. After 7 h of oxidation in static air at 1500°C, the mass loss reaches 22.22%. To a certain extent, the compactness of the coating can be improved by the slurry impregnation and Si sol gel method.

Corrosion of SiC layers on coated zirconia particles in wet atmosphere

Effect of Hydrothermal Corrosion on the Fracture Strength of SiC Layer in Tristructural‐isotropic Fuel Particles

High Temperature Oxidation Behavior of SiC Coating in TRISO Coated Particles

SiC Performance of Coated Fuel Particles under High-Temperature Atmosphere of Air

Oxidation mechanism of SiC coated layer in air atmosphere at 1400°C

Oxidation Behavior of Dense SiC Coating in Water Vapor and Its Mixed Atmosphere with Air

Ultra-high temperature microstructural changes of SiC layers in TRISO particles

Effect of Si on the structure and oxidation behavior of Cr-Si coatings on Zry-4 under high temperature steam environment

Microstructure Evolution and Failure Mechanism of Cr-coated Zry-4 in Air and Steam at 1200 °C

In-situ microstructure observation of oxidized SiC layer in surrogate TRISO fuel particles under krypton ion irradiation

The Oxidation Behavior of Multi-layered SiC Coated Graphite in Water Vapor Containing Environment

SiC Coating on HTR Graphite Spheres Prepared by Fluidized-Bed Chemical Vapor Deposition

Investigation of oxidation behaviors of coated Zircaloy as accident-tolerant fuel with CrAlN and CrAlSiN coatings in high-temperature steam

Study of Sic/Sio2 Oxidation-Resistant Coatings on Matrix Graphite for Htr Fuel Element

Preparation and Characterization of SiC Layer of Coated Fuel Particles for High-Temperature Gas-Cooled Reactor

Design and preparation of SiC based novel coated fuel particle

Research on Microstructure and Oxidation Resistant Property of ZrSi2-SiC/SiC Coating on HTR Graphite Spheres

Preparation of SiC Composite Coating on the Surface of Graphite Spheres in VHTR

Study on the fretting wear performance of oxide layer and Cr coating on zirconium alloy in high-temperature water

Study of SiC layer with fine grains in HTGR coated fuel particles

Dual layer SiC coating on matrix graphite sphere prepared by pack cementation and fluidized-bed chemical vapor deposition