Abstract:Effective channel control with low contact resistance can be accomplished through selective ion implantation in Si and III-V semiconductor technologies; however, this approach cannot be adopted for ultrathin van der Waals materials. Herein, we demonstrate a self-aligned fabrication process based on self-terminated p-doping and layer-by-layer chemical etching to achieve low contact resistance as well as a high on/off current ratio in ultrathin tungsten diselenide (WSe2) field-effect transistors (FETs). Damage-free layer-by-layer thinning of the WSe2 channel is repeated up to a thickness of approximately 1.4 nm, while maintaining the selectively p-doped source/drain regions. The device characteristics of the recessed-channel WSe2 FET are systematically monitored during this layer-by-layer recess-channel process. The WSe2 etching rate is estimated to be 2-3 layers per cycle of oxidation and subsequent chemical etching. The self-terminated tungsten oxide (WOX) layer grown through ultraviolet-ozone treatment induces robust p-doping in the neighboring (or underlying) WSe2 through the electron withdrawal mechanism, which remains in the source/drain regions after channel oxide removal. The adopted self-terminated and self-aligned recess-channel process for ultrathin WSe2 FETs enables the realization of a high on/off output current ratio (>108) and field-effect mobility (∼190 cm2/V·s), while maintaining low contact resistance (0.9-6.1 kΩ·μm) without a postannealing process. The proposed facile and reproducible doping and atomic-layer-etching method for the fabrication of a recessed-channel FET with an ultrathin body can be helpful for high-performance two-dimensional semiconductor devices and is applicable to post-Si complementary metal-oxide semiconductor devices.

Promotion of Processability in a p-Type Thin-Film Transistor Using a Se-Te Alloying Channel Layer

Processes to enable hysteresis-free operation of ultrathin ALD Te p-channel field-effect transistors

Advances in n-Type Crystalline Oxide Channel Layers for Thin-Film Transistors: Materials, Fabrication Techniques, and Device Performance

Selenium alloyed tellurium oxide for amorphous p-channel transistors

High-performance P-Channel Transistors with Transparent Zn Doped-Cui

Strain modulation effects on Two-Dimensional tellurium for advanced p-Type transistor applications

Exceedingly High Performance Top-Gate P-Type SnO Thin Film Transistor with a Nanometer Scale Channel Layer

Influence of metallization process on solution-processed InGaZnO thin film transistors

Fabrication of p-type 2D single-crystalline transistor arrays with Fermi-level-tuned van der Waals semimetal electrodes

Controlled 2D growth approach via atomic layer deposition for improved stability and performance in flexible SnO thin-film transistors

Wafer-Scale Atomic Layer-Deposited TeO x /Te Heterostructure P-Type Thin-Film Transistors

Solution-processed Inorganic P-Channel Transistors: Recent Advances and Perspectives

High-performance Tin Perovskite Transistors Through Formate Pseudohalide Engineering

High mobility ultra-thin crystalline indium oxide thin film transistor using atomic layer deposition

InZnTiON Channel Layer for Highly Stable Thin-Film Transistors and Light-Emitting Transistors

Performance Enhancement of Channel-Engineered Al-Zn-Sn-O Thin-Film Transistors with Highly Conductive In-Ga-Zn-O Buried Layer via Vacuum Rapid Thermal Annealing

Amorphous copper iodide: a p-type semiconductor for solution processed p-channel thin-film transistors and inverters

Control of subthreshold swing using an in situ PEALD nano-laminated IGZO/Al2O3 multi-channel structured TFT

Formation of Large Crystalline Domains in a Semiconducting Polymer with Semi-fluorinated Alkyl Side Chains and Application to High-Performance Thin-Film Transistors

Recessed-Channel WSe2 Field-Effect Transistor via Self-Terminated Doping and Layer-by-Layer Etching

Tuning the Threshold Voltage of an Oxide Thin-Film Transistor by Electron Injection Control Using a p-n Semiconductor Heterojunction Structure