Abstract:In this work, the microstructure and mechanical properties of titanium matrix composites were tuned by introducing graphene and alloying elements. The titanium matrix composites reinforced by graphene oxide (GO) and cobalt elements (GO@ Co/TA1) are synthesized by the spark plasma sintering (SPS) technique. Results show that the precipitated Ti2Co phase is almost reticulate distributed in the tissue, while the in situ TiC particles are discontinuously distributed at the grain boundaries. The ultimate tensile strength and yield strength of GO@ Co/TA1 composites are 160% and 126% higher than those of pure TA1, respectively. In addition, composites show excellent ductility where the elongation of GO@Co/TA1 is around 10.95%. Therefore, such enhanced mechanical properties can be attributed to the synergistic strengthening effect of interfacial‐distributed TiC particles and intragranular‐distributed intermetallic compounds (Ti2Co), which would provide a new idea for the design of metal matrix composite. This work strengthens the composite by introducing graphene and alloy elements. Results show that the micro‐structure is characterized by the precipitation of intermetallic compound particles within the intragranular and in situ TiC particles within the interfacial, while the strength enhancement can be attributed to the synergistic strengthening effect of the interfacial TiC particles and intragranular intermetallic compounds (Ti2Co).

Mechanical properties of low-pressure sintered WC-6Co cemented carbide doped with graphene oxide/alumina composite particles

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Enhanced the Mechanical Properties and Corrosion Resistance of Ultra-Coarse Grain WC-8Co Cemented Carbides by the Introduction of Cu and Ni

Effect of Graphene on the Microstructure and Mechanical Properties of WC-Based Cemented Carbide

Microstructures and Properties of WC-10 wt.%CoCrFeNiAlx Composite Cemented Carbides

Graphene oxide/Al composites with enhanced mechanical properties fabricated by simple electrostatic interaction and powder metallurgy

Effect of graphene oxide on mechanical properties of UHPC and analysis of micro-control mechanism

Enhanced toughness and strength of boron carbide ceramics with reduced graphene oxide fabricated by hot pressing

Effect of graphene on microstructure and properties of Gr/CuCr10 composites

Effects of nano-alumina on mechanical properties and wear resistance of WC-8Co cemented carbide by spark plasma sintering

Micromechanical and tribological behavior of titanium matrix composites reinforced with graphene oxide

Study on Effect of High-Entropy Alloy Binder on Microstructure and Properties of WC Cemented Carbide Doped with Rare Earth Oxide

Synthesis of Y2O3-doped WC-Co powders by wet chemical method and its effect on the properties of WC-Co cemented carbide alloy

The optimization of mechanical property and corrosion resistance of WC-6Co cemented carbide by Mo2C content

Preparation and Mechanical Properties of Hard Metals Using Graphene As Carbon Source

Preparation and Coefficient of Friction of YBa2Cu3O7-δ/Graphene Oxide Composites

Thermal deformation behavior of GO/CeO2 in-situ reinforced Cu30Cr10W electrical contact material

Mechanical properties of binderless tungsten carbide enhanced via the addition of ZrO2-20 wt% Al2O3 composite powder and graphene nanosheets

Microstructure and Properties of Titanium Matrix Composites Synergistically Reinforced by Graphene Oxide and Alloying Elements

Novel WC-Co-Ti3SiC2 cemented carbide with ultrafine WC grains and improved mechanical properties

Microstructure and Toughening Mechanisms of Al2O3/(W, Ti)C/graphene Composite Ceramic Tool Material