Abstract:Cu and unoxidized graphene composite films were prepared by electroplating under room temperature. Graphene was added to the electrolyte of Cu to form composite materials to improve the performance of Cu for interconnection. Composite electrolyte containing high concentration of graphene (up to 0.5 g/L) was prepared by adding CTAB as surfactant. And ultrasound was also used to increase dispersion degree and reduce graphene agglomeration in electrolyte. Average coefficient of thermal expansion (CTE) of the composite films determined by thermo-mechanical analysis (TMA) shows a decrease from 17.3 ppm/K to 14.2 ppm/K from 260 K to 320 K, which reduce CTE by 18 % compared with Cu. CTE of the composite materials can be reduced to 10 ppm/K at 243 K, which is only 60 % of CTE of Cu. The thermal conductivity of the composite materials measured by phase sensitive transient thermo-reflectance (PSTTR) technique shows an improvement from 385 W/m.K to 468 W/m.K. CTE and thermal conductivity of the composite materials both decrease with the increase of current density. And they also both increase with the increase of graphene concentration. The composite materials also show good mechanical properties. The average hardness is 2.5 GPa, which is about 2 times of Cu. And the average elastic modulus is 145 GPa, which is 38 % higher than that of Cu. The resistivity of the composite materials is basically equivalent to that of pure Cu. Result of the experiment proved that the composite materials have better performance under low temperature conditions. The improvement of material properties makes composite materials have good application prospects for 3D interconnection in the near future.

Effect of graphene on microstructure and properties of Gr/CuCr10 composites

Effect of graphene addition on properties of Cu-based composites for electrical contacts

Microstructure and Properties of a Graphene Reinforced Cu–Cr–Mg Composite

Fabrication of Cu/Al/Cu Laminated Composites Reinforced with Graphene by Hot Pressing and Evaluation of Their Electrical Conductivity

Effect of Cr micro-alloying on microstructure and mechanical properties of alumina whisker and graphene co-reinforced copper matrix composites

Effects of the graphene content on mechanical properties and corrosion resistance of aluminum matrix composite

Effects of Cr addition on the microstructural, mechanical and electrical characteristics of Cu–6wt.%Ag microcomposite

Effect of Graphene on the Microstructure and Mechanical Properties of WC-Based Cemented Carbide

Microstructure, mechanical and tribological properties of Cu-Sn/Cr3C2/Gr composites

Enhance the properties of CuCr alloy by constructing Gr@Cr core-shell structure

Preparation and Characterization of Electroplated Cu/Graphene Composite

Mechanical properties of low-pressure sintered WC-6Co cemented carbide doped with graphene oxide/alumina composite particles

The improved softening resistance and high electrical conductivity of the 3D graphene enhanced copper-based composite fabricated by liquid carbon source

Role of Cr on the interfacial bonding, mechanical, and electrochemical corrosion properties of Cu matrix composites co-reinforced by Al2O3 whisker and graphene: combined experiments and first-principles calculations

Effects of graphene addition on the refinement of silicon phase in graphene/A356.2 composites

Microstructure and properties of bulk copper matrix composites strengthened with various kinds of graphene nanoplatelets

Effect of Grain Size on the Properties of Aluminum Matrix Composites with Graphene

The Influence of Interface Structure on the Electrical Conductivity of Graphene Embedded in Aluminum Matrix

A high strength and high electrical conductivity graphene/Cu composite with good high-temperature stability

Preparation and properties of graphene reinforced Cu/0.5CeO230Cr electrical contact materials