Abstract:TiC is widely used as an ideal reinforcement to strengthen titanium matrix composites (TMCs). The morphology, size and distribution of TiC and the interfacial structure of TiC-Ti are crucial to obtain good mechanical properties of titanium matrix composites. These are keys to achieve superior strength and good ductility in titanium matrix composites. Hence, we investigated the effects of TiC generated in situ from different carbon sources (i.e., amorphous carbon nanoparticles , reduced graphene oxide and graphene nanoparticles) on the interfacial structure and mechanical properties of Ti60 alloy. Amorphous carbon nanoparticles (ACNS), reduced graphene oxide (rGO) and graphene nanoparticles (GNPs) reinforced Ti60 composites were prepared using spark plasma sintering (SPS). Among the three carbon nanomaterials, ACNs and rGO reacted with Ti60 matrix to form TiC, facilitating interfacial bonding. GNPs were not completely reacted with Ti60 matrix and residual on the interface owing to its poor dispersion effect, resulting in interfacial structure defects . The mechanical properties of the ACNs/Ti60 and rGO/Ti60 composites are high than GNPs/Ti60 composites. The ultimate tensile strengths of ACNs/Ti60 composites were 1173.49 MPa, 702.96 MPa and 653.13 MPa at room temperature, 600 °C and 650 °C, respectively, improving by 17.63%, 14.13% and 16.21% over Ti60, respectively. The superior mechanical properties are attributed to the fact that ACNs and rGO are more easily dispersed in the Ti60 matrix. The reaction activity of ACNs and rGO are higher than GNPs, and more TiC phase content was formed after sintering. TiC formed a semi-coherent interface with the Ti60 matrix, promoting the interfacial bonding strength. It also played a role in grain refinement and load transfer effect. This work helps to further elucidate the reinforcement effect of TiC formed by different carbon nanomaterials on TMC.

Microstructure and Properties of Titanium Matrix Composites Synergistically Reinforced by Graphene Oxide and Alloying Elements

Microstructure and Tensile Properties of Graphene-Oxide-Reinforced High-Temperature Titanium-Alloy-Matrix Composites.

Synergistic strengthening effect of titanium matrix composites reinforced by graphene oxide and carbon nanotubes

Microstructural Evolution and Mechanical Properties of Graphene Oxide-Reinforced Ti6Al4V Matrix Composite Fabricated Using Spark Plasma Sintering

Micromechanical and tribological behavior of titanium matrix composites reinforced with graphene oxide

Constructing micro-network of Ti 2 Cu and in-situ formed TiC phases in titanium composites as new strategy for significantly enhancing strength

Unique grain refinement mechanism of graphene oxide reinforced high-temperature titanium alloy matrix composite

Graphene-TiC hybrid reinforced titanium matrix composites with 3D network architecture: Fabrication, microstructure and mechanical properties

A novel heterogeneous network structure titanium matrix composite with a combination of strength and ductility

Mechanical Properties of TC11 Titanium Alloy and Graphene Nanoplatelets/TC11 Composites Prepared by Selective Laser Melting

Effects of carbon nanomaterials on interfacial structure and mechanical properties of high temperature Ti matrix composites

Effect of GO content on microstructure and mechanical properties of Ti6Al4V coating reinforced artificial joint

Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC

Nano/microstructures and mechanical properties of Al2O3–TiC ceramic composites reinforced with Al2O3@RGO nanohybrids

Simultaneously improving mechanical, thermal, and anti-wear properties of Ti alloys using 3D-networked graphene as reinforcement

Microstructure and tribological properties of titanium matrix nanocomposites through powder metallurgy using graphene oxide nanosheets enhanced copper powders and spark plasma sintering

Interface microstructure and strengthening mechanisms of multilayer graphene reinforced titanium alloy matrix nanocomposites with network architectures

Preparation and Performance Study of Titanium‐Based Nanocomposites in Selective Laser Melting: Microstructure Regulation and Optimization of Mechanical Properties

Graphene oxide/Al composites with enhanced mechanical properties fabricated by simple electrostatic interaction and powder metallurgy

Fabrication, microstructure and mechanical properties of TiAl matrix composite reinforced by submicro/nano-Ti 2 AlC

Microstructural characterization and mechanical properties of (TiC+TiB)/TA15 composites prepared by an in-situ synthesis method