Abstract:Metal oxides are commonly used in optoelectronic devices due to their transparency and excellent electrical conductivity. Based on its physical properties, each metal oxide serves as the foundation for a unique device. In this study, we opt to determine and assess the physical properties of MoO3 metal oxide. Accordingly, the optical and electronic parameters of MoO3 are evaluated using DFT (Density Functional Theory), and PBE and HSE06 functionals were mainly used in the calculation. It was found that the band structure of MoO3 calculated using PBE and HSE06 exhibited indirect semiconductor properties with the same line quality. Its band gap was 3.027 eV in HSE06 and 2.12 eV in PBE. Electrons and holes had effective masses and mobilities of 0.06673, -0.10084, 3811.11 cm2V-1s-1 and 1630.39 cm2V-1s-1, respectively. In addition, the simulation determined the dependence of the real and imaginary components of the complex refractive index and permittivity of MoO3 on the wavelength of light, and a value of 58 corresponds to the relative permittivity. MoO3 has a refractive index of between 1.5 and 3 in the visible spectrum, which can therefore be used as an anti-reflection layer for solar cells made from silicon. In addition, based on the semiconducting properties of MoO3, it was estimated that it could serve as an emitter layer for a solar cell containing silicon. In this work, we calculated the photoelectric parameters of the MoO3/Si heterojunction solar cell using Sentaurus TCAD (Technology Computing Aided Design). According to the obtained results, the efficiency of the MoO3/Si solar cell with a MoO3 layer thickness of 100 nm and a Si layer thickness of 9 nm is 8.8%, which is 1.24% greater than the efficiency of a homojunction silicon-based solar cell of the same size. The greatest short-circuit current for a MoO3/Si heterojunction solar cell was observed at a MoO3 layer thickness of 60 nm, which was determined by studying the dependency of the heterojunction short-circuit current on the thickness of the MoO3 layer.

Silicon solar cell with tunneling oxide on sulfur‐deficient intrinsic MoS2 thin film

Investigation in Feasibility of Molybdenum As A Back Contact Layer for Silicon Based Quantum Dot Solar Cells

Crystalline Silicon Heterojunction Solar Cells with Metal Oxide Window Layers

In-situ hydrothermal growth of MoS2 absorber layer for planar heterojunction solar cells

In situ growth MoS 2 quantum dots as promising interface materials for silicon solar cells

Asymmetric TMO–Metal–TMO Structure for Enhanced Efficiency and Long-Term Stability of Si-Based Heterojunction Solar Cells

Low Oxygen Content MoOx and SiOx Tunnel Layer Based Heterocontacts for Efficient and Stable Crystalline Silicon Solar Cells Approaching 22% Efficiency

Transport mechanisms in silicon heterojunction solar cells with molybdenum oxide as a hole transport layer

Electrical and Photovoltaic Characteristics of MoS2/Si P-N Junctions

Enhanced Photovoltaic Performances of Graphene/Si Solar Cells by Insertion of an MoS2 Thin Film

Molybdenum oxide hole selective transport layer by hot wire oxidation-sublimation deposition for silicon heterojunction solar cells

Large-Area Si Solar Cells Based on Molybdenum Oxide Hole Selective Contacts

Interface Designed MoS2/GaAs Heterostructure Solar Cell with Sandwich Stacked Hexagonal Boron Nitride

Simulation of High Efficiency Silicon Heterojunction Solar Cells with Molybdenum Oxide Carrier Selective Layer

Reporting Performance in MoS2–TiO2 Bilayer and Heterojunction Films Based Dye-Sensitized Photovoltaic Devices

Construction of a MoOx/MoS2 Heterojunction via the Surface Sulfurization of the Oxide and Its Photocurrent-Switching Characteristics in the Range of the Broadband Light Spectrum

Gate Tunable Photovoltaic Effect in MoS2 vertical P-N Homostructures

Manipulating the Intrinsic Defect of MnS by Surface Sulfidation for Inverted Sb2(S,Se)3 Planar‐Heterojunction Solar Cells

Enhanced Monolayer Mos2/Inp Heterostructure Solar Cells by Graphene Quantum Dots

Sb2Se3 thin film solar cells in substrate configuration and the back contact selenization

Atom-to-Device Simulation of MoO3/Si Heterojunction Solar Cell