Abstract:Dopant-free carrier-selective contacts (CSCs) are considerably attractive on highly efficient crystalline silicon (c-Si) based heterojunction solar cells (HSCs) owing to their combined advantages of low thermal budget, ease of processing and simplicity of the device architecture. However, due to inferior passivation property and relatively high resistivity, the silicon oxide (SiOx) thin film is always ruled out as a viable interfacial layer in a CSC. Here, we demonstrate that the functionalization of nanoscale SiOx films with low work-function metals (WFMs) can simultaneously achieve moderate-level passivation and low contact resistivity on lightly doped n-type c-Si. Simulation results on the CSC comprising SiOx/low-WFM reveal that the tunnel SiOx layer alleviates Fermi-level pinning, and the low WFM helps to reduce the effective barrier height and contact resistivity. This kind of bi-functional electron-selective design possesses high tolerance to the surface state density on the c-Si surface as well as the SiOx layer thickness, as experimentally confirmed by the SiOx/Mg stack achieving an implied open-circuit voltage of 661 mV and a contact resistivity of 35.2 mΩ·cm2 for a SiOx film thickness up to 1.7 nm. A comprehensive assessment suggests that this kind of rear electron transport layer (ETL) enables a theoretical power conversion efficiency (PCE) up to 27.4% if assuming an ideal front junction. Ultimately, a fully dopant-free c-Si HSC featuring a SiOx/low-WFM electron-selective contact and a MoOx hole-selective contact was proposed, yielding a PCE of 21.8%. The relatively high performance and facile integration with c-Si substrates enabled by the SiOx/low-WFM contact may open up new possibilities in designing and fabricating low-cost dopant-free SCs toward high efficiencies competitive with conventionally diffused pn junction SCs.

Crystalline Silicon Heterojunction Solar Cells with Metal Oxide Window Layers

Performance analysis of c-Si heterojunction solar cell with passivated transition metal oxides carrier-selective contacts

Microcrystalline Silicon‐carbon Alloys As Anti‐reflection Window Layers in High Efficiency Thin Film Silicon Solar Cells

Asymmetric TMO–Metal–TMO Structure for Enhanced Efficiency and Long-Term Stability of Si-Based Heterojunction Solar Cells

Microcrystalline silicon carbide window layers in thin film silicon solar cells

Crystalline Silicon Heterojunction Solar Cell with 81.6% Fill Factor, Deposited by Physical Vapour Deposition Methods Only

Silicon solar cell with tunneling oxide on sulfur‐deficient intrinsic MoS2 thin film

Microcrystalline Silicon Thin Film Solar Cells with Microcrystalline Silicon Carbide Window Layers and Silicon Absorber Layers Both Prepared by Hot‐Wire CVD

Hit Solar Cell With V2ox Window Layer

Molybdenum oxide hole selective transport layer by hot wire oxidation-sublimation deposition for silicon heterojunction solar cells

Heterojunction solar cells with asymmetrically carrier-selective contact structure of molybdenum-oxide/silicon/magnesium-oxide

Low Oxygen Content MoOx and SiOx Tunnel Layer Based Heterocontacts for Efficient and Stable Crystalline Silicon Solar Cells Approaching 22% Efficiency

Silicon solar cells with bifacial metal oxides carrier selective layers

Simulation of High-Efficiency Crystalline Silicon Solar Cells with Homo–Hetero Junctions

Principles of dopant-free electron-selective contacts based on tunnel oxide/low work-function metal stacks and their applications in heterojunction solar cells

Cost-Effective Fabrication of c-Si Solar Cell Using Transition Metal Oxides Interfaces

Efficiency Enhancement of c-Si/TiO$_2$ Heterojunction Thin Film Solar Cell Using Hybrid Metal-Dielectric Nanostructures

Simulation of High Efficiency Silicon Heterojunction Solar Cells with Molybdenum Oxide Carrier Selective Layer

Dopant‐Free and Carrier‐Selective Heterocontacts for Silicon Solar Cells: Recent Advances and Perspectives

Simulation and Optimization Characteristic of Novel MoS&lt;sub&gt;2&lt;/sub&gt;/c-Si HIT Solar Cell

Numerical investigation of energy level strategy for TMO/Si tunneling heterojunction solar cells