Abstract:The global demand for renewable energy sources has intensified the quest for innovative and inexpensive solar cell technologies. Employing thin crystalline silicon (c-Si) is of great interest in these advancements. Here, integration of organic poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and nanostructured thin-flexible Si wafer (~50 μm) is investigated to harness their synergies in fabricating mechanically flexible hybrid heterojunction solar cells (HHSCs). Flexible Si wafers are prepared through alkali etching followed by SiNW on single side of the thin wafers using single-step silver (Ag)-assisted chemical etching (Ag-ACE) process at room temperature. The SiNW incorporated flexible solar cells produced an impressive power conversion efficiency (PCE: 9.0%) even in the simple design owing to enhanced light absorption in broad spectral range. It is found that SiNW length and polymer layer thickness play critical role in defining the trade-off among the optoelectronic, junction and solar cell parameters. The SiNW of 170±20 nm length and PEDOT:PSS of 100±10 nm layer is the optimal combination for the best solar cell parameters. The enhanced light trapping and charge generation rate are also confirmed by finite-difference time-domain (FDTD) simulation. Detailed analysis of light trapping, junction properties, surface passivation, device performance parameters and their co-relation have been discussed. Our study demonstrates the SiNW-incorporated flexible and efficient PEDOT:PSS/n-Si HHSCs, which can lead to not only the advancement of low-cost photovoltaics but also offer potential for diverse applications, from portable electronics to wearable technology.

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Silicon-nanocrystal-incorporated Ternary Hybrid Solar Cells

Silicon nanocrystals synthesized using very high frequency non-thermal plasma and their application in photovoltaics

Application of Silicon Nanocrystals in Solar Cells

Self-Assembled Amphiphilic Block Copolymers/Cdte Nanocrystals for Efficient Aqueous-Processed Hybrid Solar Cells

Hybrid Solar Cells Based on P3ht and Si@Mwcnt Nanocomposite

Improved Photovoltaic Performance of MEH‐PPV/PCBM Solar Cells Via Incorporation of Si Nanocrystals

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.

High-Performance Ultrathin Organic-Inorganic Hybrid Silicon Solar Cells via Solution-Processed Interface Modification.

Toward High-Performance Organic-Inorganic Hybrid Solar Cells: Bringing Conjugated Polymers and Inorganic Nanocrystals in Close Contact.

Phosphate Ester Side-Chain-Modified Conjugated Polymer For Hybrid Solar Cells

Over 16% Efficiency Organic/nanostructured Si Heterojunction Solar Cells with a P-Doped Organic Small Molecule Layer

Realization of 13.6% Efficiency on 20 μm Thick Si/Organic Hybrid Heterojunction Solar Cells via Advanced Nanotexturing and Surface Recombination Suppression

Improved Device Performance of Si-based Heterojunction Solar Cells by Using Phosphorus Doped Si Nanocrystals Embedded in SiC Host Matrix

Organic‐inorganic Nanocomposites Composed of Conjugated Polymers and Semiconductor Nanocrystals for Photovoltaics

Nanostructural Optimization of Silicon/pedot:Pss Hybrid Solar Cells for Performance Improvement

High-Efficiency Polymer Solar Cells Achieved by Doping Plasmonic Metallic Nanoparticles into Dual Charge Selecting Interfacial Layers to Enhance Light Trapping

Silicon Nanowires Incorporated Efficient and Flexible PEDOT:PSS/Silicon Hybrid Solar Cells

Monolithic Organic/Colloidal Quantum Dot Hybrid Tandem Solar Cells via Buffer Engineering

Quasi-conformal Monolithic N-I-p Perovskite/c-Si Tandem Solar Cells with Light Management Strategies Exceed 28% Efficiency