Abstract:Currently, crystalline and polycrystalline silicon wafer based solar cells dominate the photovoltaic market, which employs expensive manufacturing processes. Zinc oxide is one among the inexpensive alternatives for acting as emitter/anti-reflection coating layer which can be used in combination with widely available p-type silicon. Hence it becomes essential to gain in-depth knowledge about the charge transport mechanisms involved in the n-type ZnO/p-type silicon (Si) heterojunction devices. Therefore, Si/ZnO solar cell is modeled and the carrier transport mechanisms are carefully examined by analyzing the band edge discontinuities, electric field distributions at the Si/ZnO interface, carrier generation-recombination profile for varying ZnO thickness, carrier density and affinity values. The photo- generation rate degrades with the increase in ZnO emitter thickness owing to increased absorption in the blue region and is independent of ZnO affinity and donor concentration. The cliff like configuration with high conduction band discontinuity at the Si/ZnO interface for higher values of ZnO affinity has resulted in the formation of poor electric field and the lattice mismatch resulting in high defects formation (recombination centers) at Si/ZnO interface are the predominant causes for deficit in open circuit voltage and fill factor. Hence the conduction band offset alignment is further engineered by designing Si/MgZnO solar cell model and Mg doped ZnO emitter has significantly improved the band offset alignment at the p-n heterojunction when compared to ZnO emitter. Moreover, the simulation results revealed that the stronger electric field strength developed at the heterojunction is suggested to favor the carrier separation process by drift motion thereby improving the open circuit voltage and fill factor of the device. As a next step, both the models are optimized for varying emitter parameters like thickness, carrier density etc using Silvaco ATLAS simulator. Based on this investigation, the optimized Si/ZnO and Si/MgZnO designs anticipate improved conversion efficiencies of 11.57% and 14.46% respectively.

Simulation of High Efficiency Silicon Heterojunction Solar Cells with Molybdenum Oxide Carrier Selective Layer

Investigation in Feasibility of Molybdenum As A Back Contact Layer for Silicon Based Quantum Dot Solar Cells

MoOx Hole Collection Layer for A-Si: H Based Photovoltaic Cells

Heterojunction solar cells with asymmetrically carrier-selective contact structure of molybdenum-oxide/silicon/magnesium-oxide

Molybdenum oxide hole selective transport layer by hot wire oxidation-sublimation deposition for silicon heterojunction solar cells

Performance analysis of c-Si heterojunction solar cell with passivated transition metal oxides carrier-selective contacts

Simulation of p-type c-Si solar cells with metal oxides as carrier-selective contacts

Atom-to-Device Simulation of MoO3/Si Heterojunction Solar Cell

Low Oxygen Content MoOx and SiOx Tunnel Layer Based Heterocontacts for Efficient and Stable Crystalline Silicon Solar Cells Approaching 22% Efficiency

An Enhanced Charge Carrier Separation in a Heterojunction Solar Cell with a Metal Oxide

Simulation of a high-efficiency silicon-based heterojunction solar cell

Crystalline Silicon Heterojunction Solar Cells with Metal Oxide Window Layers

Transport mechanisms in silicon heterojunction solar cells with molybdenum oxide as a hole transport layer

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

Numerical Study of Metal Oxide Heterojunction Solar Cells

Simulation of Silicon Heterojunction Solar Cells for High Efficiency with Lithium Fluoride Electron Carrier Selective Layer

TCAD Simulation Of Germanium-based Heterostructure Solar Cell employing Molybdenum Oxide as a Hole-Selective Layer

A comprehensive study on electron and hole transport layers for designing and optimizing the efficiency of MoSe2-Based solar cells using numerical simulation techniques

Silicon solar cell with tunneling oxide on sulfur‐deficient intrinsic MoS2 thin film

Modelling, simulation, optimization of Si/ZnO and Si/ZnMgO heterojunction solar cells

Efficient Hole Transport Layers for Silicon Heterojunction Solar Cells by Surface Plasmonic Modification in MoOx/Au NPs/MoOx Stacks