Abstract:Currently, crystalline and polycrystalline silicon wafer based solar cells dominate the photovoltaic market, which employs expensive manufacturing processes. Zinc oxide is one among the inexpensive alternatives for acting as emitter/anti-reflection coating layer which can be used in combination with widely available p-type silicon. Hence it becomes essential to gain in-depth knowledge about the charge transport mechanisms involved in the n-type ZnO/p-type silicon (Si) heterojunction devices. Therefore, Si/ZnO solar cell is modeled and the carrier transport mechanisms are carefully examined by analyzing the band edge discontinuities, electric field distributions at the Si/ZnO interface, carrier generation-recombination profile for varying ZnO thickness, carrier density and affinity values. The photo- generation rate degrades with the increase in ZnO emitter thickness owing to increased absorption in the blue region and is independent of ZnO affinity and donor concentration. The cliff like configuration with high conduction band discontinuity at the Si/ZnO interface for higher values of ZnO affinity has resulted in the formation of poor electric field and the lattice mismatch resulting in high defects formation (recombination centers) at Si/ZnO interface are the predominant causes for deficit in open circuit voltage and fill factor. Hence the conduction band offset alignment is further engineered by designing Si/MgZnO solar cell model and Mg doped ZnO emitter has significantly improved the band offset alignment at the p-n heterojunction when compared to ZnO emitter. Moreover, the simulation results revealed that the stronger electric field strength developed at the heterojunction is suggested to favor the carrier separation process by drift motion thereby improving the open circuit voltage and fill factor of the device. As a next step, both the models are optimized for varying emitter parameters like thickness, carrier density etc using Silvaco ATLAS simulator. Based on this investigation, the optimized Si/ZnO and Si/MgZnO designs anticipate improved conversion efficiencies of 11.57% and 14.46% respectively.

An Enhanced Charge Carrier Separation in a Heterojunction Solar Cell with a Metal Oxide

Simulation of High Efficiency Silicon Heterojunction Solar Cells with Molybdenum Oxide Carrier Selective Layer

A Comprehensively Theoretical and Experimental Study of Carrier Generation and Transport for Achieving High Performance Ternary Blend Organic Solar Cells

Enhanced charge extraction in organic solar cells through electron accumulation effects induced by metal nanoparticles

Modelling, simulation, optimization of Si/ZnO and Si/ZnMgO heterojunction solar cells

Numerical Study of Metal Oxide Heterojunction Solar Cells

Atom-to-Device Simulation of MoO3/Si Heterojunction Solar Cell

Transport mechanisms in silicon heterojunction solar cells with molybdenum oxide as a hole transport layer

Simulation of p-type c-Si solar cells with metal oxides as carrier-selective contacts

Simulation of a high-efficiency silicon-based heterojunction solar cell

Performance analysis of c-Si heterojunction solar cell with passivated transition metal oxides carrier-selective contacts

Heterojunction solar cells with asymmetrically carrier-selective contact structure of molybdenum-oxide/silicon/magnesium-oxide

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

Efficient Hole Transport Layers for Silicon Heterojunction Solar Cells by Surface Plasmonic Modification in MoOx/Au NPs/MoOx Stacks

Exciton delocalization incorporated drift-diffusion model for bulk-heterojunction organic solar cells

Numerical Study of Metal Oxide Schottky Type Solar Cells

TCAD Simulation Of Germanium-based Heterostructure Solar Cell employing Molybdenum Oxide as a Hole-Selective Layer

The Bifunctional Tin-Doped Indium Oxide As Hole-Selective Contact and Collector in Silicon Heterojunction Solar Cell with A Stable Intermediate Oxide Layer

Mechanism of Trapping Effect in Heterojunction with Intrinsic Thin-Layer Solar Cells: Effect of Density of Defect States

SCAPS 1D based study of hole and electron transfer layers to improve MoS2−ZrS2 solar cell efficiency

Enhancing performance of heterojunction silicon solar cells through atomic-layer-deposited MoO x hole contact and atomic-layer-deposited AlZnO layer