Abstract:Silicon quantum dot (Si QD) solar cells offer the potential to tune the effective band gap through quantum confinement and hence allow fabrication of optimised tandem devices in one growth run in a thin film process. Previous work in our group has shown how such cells can be fabricated by sputtering of thin layers of silicon rich oxide sandwiched between a stoichiometric oxide that on annealing crystallise to form Si QDs of uniform and controllable size. Doping multilayers with P and B allows formation of a rectifying junction with an effective band gap of 1.8 eV, which can give an open circuit voltage (V(OC)) of almost 500 mV. However, the doping behaviour of P and B in these QD materials is not well understood. In addition P and B have big but opposite effects on QD crystallisation, with P(B) forming larger (smaller) QDs than for undoped material. Two possible models for the doping mechanisms in these materials are explored: one relying on doping of a sub-oxide region around the Si QDs and the other based on the differing nucleation effects of P and B. In addition initial results on hetero-interfaces in the QD superstructure are assessed as a means to improve vertical current transport, and the effects of hydrogenation on improving V(OC) by passivating defects. Routes to incorporating these explanations for doping and other structural improvements are discussed as means of optimising the performance of these Si QD cells. Copyright (C) 2010 John Wiley & Sons, Ltd.

In situ growth MoS 2 quantum dots as promising interface materials for silicon solar cells

Investigation in Feasibility of Molybdenum As A Back Contact Layer for Silicon Based Quantum Dot Solar Cells

Improved Nanocrystal Formation, Quantum Confinement and Carrier Transport Properties of Doped Si Quantum Dot Superlattices for Third Generation Photovoltaics

Silicon Quantum Dot Based Solar Cells: Addressing the Issues of Doping, Voltage and Current Transport

Formation and Photoluminescence of Si Quantum Dots in Sio2/Si3n4 Hybrid Matrix for All-Si Tandem Solar Cells

Silicon solar cell with tunneling oxide on sulfur‐deficient intrinsic MoS2 thin film

Enhanced Monolayer Mos2/Inp Heterostructure Solar Cells by Graphene Quantum Dots

In-situ hydrothermal growth of MoS2 absorber layer for planar heterojunction solar cells

Heterojunction solar cells with asymmetrically carrier-selective contact structure of molybdenum-oxide/silicon/magnesium-oxide

In Situ Growth of MoS2 Onto Co-Based MOF Derivatives Toward High-Efficiency Quantum Dot-Sensitized Solar Cells.

Interface Designed MoS2/GaAs Heterostructure Solar Cell with Sandwich Stacked Hexagonal Boron Nitride

Enhanced Photovoltaic Performances of Graphene/Si Solar Cells by Insertion of an MoS2 Thin Film

In Situ Growth of MoS2 Onto Co-Based MOF Derivatives Toward High-Efficiency Quantum Dot-Sensitized Solar Cells

Enhancing the Efficiency of Perovskite Solar Cells through Interface Engineering with MoS2 Quantum Dots

Boosting Photovoltaic Performance in Organic Solar Cells by Manipulating the Size of MoS2 Quantum Dots as a Hole-Transport Material

Revealing Surface and Interface Evolution of Molybdenum Nitride as Carrier-Selective Contacts for Crystalline Silicon Solar Cells

Large-Area Si Solar Cells Based on Molybdenum Oxide Hole Selective Contacts

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

Graphene Quantum Dots Open Up New Prospects for Interfacial Modifying in Graphene/Silicon Schottky Barrier Solar Cell

Molybdenum oxide hole selective transport layer by hot wire oxidation-sublimation deposition for silicon heterojunction solar cells

Transport mechanisms in silicon heterojunction solar cells with molybdenum oxide as a hole transport layer