Abstract:Realizing ideal charge transport in field-effect transistors (FETs) of conjugated polymers is crucial for evaluating device performance, such as carrier mobility and practical applications of conjugated polymers. However, the current FETs using conjugated polymers as the active layers generally show certain non-ideal transport characteristics and poor stability. Here, ideal charge transport of n-type polymer FETs is achieved on flexible polyimide substrates by using an organic-inorganic hybrid double-layer dielectric. Deposited conjugated polymer films show highly ordered structures and low disorder, which are supported by grazing-incidence wide-angle X-ray scattering, near-edge X-ray absorption fine structure, and molecular dynamics simulations. Furthermore, the organic-inorganic hybrid double-layer dielectric provides low interfacial defects, leading to excellent charge transport in FETs with high electron mobility (1.49 +/- 0.46 cm2 V-1 s-1) and ideal reliability factors (102 +/- 7%). Fabricated polymer FETs show a self-encapsulation effect, resulting in high stability of the FET charge transport. The polymer FETs still work with high mobility above 1 cm2 V-1 s-1 after storage in air for more than 300 days. Compared with state-of-the-art conjugated polymer FETs, this work simultaneously achieves ideal charge transport and environmental stability in n-type polymer FETs, facilitating rapid device optimization of high-performance polymer electronics. Using an organic-inorganic hybrid double-layer dielectric, ideal, and environmentally stable charge transport is demonstrated in n-type polymer field-effect transistors. The fabricated polymer transistors exhibit high electron mobility of 1.49 +/- 0.46 cm2 V-1 s-1 with ideal reliability factors of 102 +/- 7%. Moreover, the transistors show robust performance to organic solvent and high mobility above 1 cm2 V-1 s-1 after storage in air for more than 300 days.image

Enhanced environmental stability of n-type polymer transistors with nickel contacts

Achieving Ideal and Environmentally Stable N‐type Charge Transport in Polymer Field‐Effect Transistors (small 16/2024)

Highly Stable Atomic Layer Deposited Zinc Oxide Thin-Film Transistors Incorporating Triple O 2 Annealing

Polymer Coating Enabled Carrier Modulation for Single-Walled Carbon Nanotube Network Inverters and Antiambipolar Transistors

Hf-Contacted High-Performance Air-Stable N-Type Carbon Nanotube Transistors

High-Performance n-type Polymer Field-effect Transistors with Exceptional Stability

Achieving Ideal and Environmentally Stable N-Type Charge Transport in Polymer Field-Effect Transistors

Highly Ambient-Stable Organic Thin-Film Transistors Fabricated Using Naphthalene Diimide and Thienylene-Vinylene-Thienylene-Based N-Type Polymers with Different Electron-Withdrawing Groups

Air- and Active Hydrogen-Induced Electron Trapping and Operational Instability in n-Type Polymer Field-Effect Transistors

Molecular n-type doping for air-stable electron transport in vacuum-processed n-channel organic transistors

Thin-film Transistors Based on Poly(3,3‴-Dialkyl-quarterthiophene) and Zinc Oxide Nanowires with Improved Ambient Stability

Tunable Electrical Properties of NiO Thin Films and P-Type Thin-Film Transistors

Alignment of linear polymeric grains for highly stable N-type thin-film transistors

Impact of electrode recrystallization on the stability of organic transistors

Stability of Polymer Thin-Film Transistors Based on Poly(3-Hexylthiophene)

n-Type organic light-emitting transistors with high mobility and improved air stability

Reduced Contact Resistance in Solution-Processed Phenylenevinylene-Based Copolymer Thin-Film Transistors Using Annealing-Induced Morphological Variation

Thermal Annealing Effects on Ni/Au Contacts to P Type Gan in Different Ambient

Large-Area Monolayer N-Type Molecular Semiconductors with Improved Thermal Stability and Charge Injection

25th anniversary article: recent advances in n-type and ambipolar organic field-effect transistors.

Improving Charge Injection at Gold/Conjugated Polymer Contacts by Polymer Insulator-Assisted Annealing for Transistors.