Abstract:We demonstrate a high mobility, triple-stack ZnO/AlZnO/YZnO heterojunction thin-film transistor (TFT) using the semiconductors deposited by spray pyrolysis at 350 °C on an Al2O3 gate insulator. A thin layer (5 nm) of AlZnO on the top of ZnO used as an active layer of an inverted coplanar-structured TFT increases the field-effect mobility (μFE) from 42.56 to 82.7 cm2 V-1 s-1. An additional 5 nm thick YZnO on the top of the ZnO/AlZnO TFT improves the electrical stability by reducing the defects in the bulk ZnO, AlZnO, and at the interface AlOx/ZnO. The ZnO-based materials show a nanocrystalline structure with the grain size less than 20 nm. The triple-stack oxide TFT shows a μFE of 71.3 cm2 V-1 s-1 with a threshold voltage (VTH) of 2.85 V. The hysteresis voltage for pristine ZnO, ZnO/AlZnO, and ZnO/AlZnO/YZnO TFTs is 0.52, 0.24, and 0.02 V, respectively. The ZnO/AlZnO/YZnO TFT shows a negligible VTH shift under temperature bias stress for 3600 s at 60 °C and excellent environmental stability over a few months, which is due to the presence of stronger Y-O and Al-O bonds in the back channel. The threshold voltage shift under positive bias temperature stress for pristine ZnO, ZnO/AlZnO, and ZnO/AlZnO/YZnO TFTs is 0.78, 0.40, and 0.15 V, respectively. Compared to the pristine ZnO TFT, the ZnO/AlZnO/YZnO TFT shows better environmental and bias stabilities with improved hysteresis. The experimental data of ZnO/AlZnO and ZnO/AlZnO/YZnO TFTs can be fitted by technology computer-aided design (TCAD) simulation using the density of states model of the oxide semiconductors. From the TCAD simulation, it is found that a 2D-like electron gas is formed at the narrow AlZnO layer between ZnO and YZnO.

Thin-film Transistors Based on Poly(3,3‴-Dialkyl-quarterthiophene) and Zinc Oxide Nanowires with Improved Ambient Stability

Highly Stable Atomic Layer Deposited Zinc Oxide Thin-Film Transistors Incorporating Triple O 2 Annealing

Synthesis of ZnO Nanowires for Thin Film Network Transistors

Zinc Oxide Nanowire Networks for Macroelectronic Devices

Solution-Processed Zinc Oxide Thin-Film Transistors with a Low-Temperature Polymer Passivation Layer

Triple-Stack ZnO/AlZnO/YZnO Heterojunction Oxide Thin-Film Transistors by Spray Pyrolysis for High Mobility and Excellent Stability

Enhancing the Stability and Mobility of TFTs via Indium-Tungsten Oxide and Zinc Oxide Engineered Heterojunction Channels Annealed in Oxygen Ambient

High-Performance, Stable Organic Thin-Film Field-Effect Transistors Based on Bis-5‘-alkylthiophen-2‘-yl-2,6-anthracene Semiconductors

Hybrid Organic-Metal Oxide Multilayer Channel Transistors with Record Operational Stability

Long-term electrical characteristics of a poly-3-hexylthiophene water-gated thin-film transistor

Improvement of Mobility and Stability in Oxide Thin-Film Transistors Using Triple-Stacked Structure

Enhanced Stability Performance of Transparent Ozone ALD ZnO Thin-Film Transistors with SiAlO X Dielectric

Air Stable N-Channel Organic Semiconductors for Thin Film Transistors Based on Fluorinated Derivatives of Perylene Diimides

Performance Improvement of Amorphous Thin-Film Transistors with Solution-Processed InZnO/InMgZnO Bilayer Channels

Addressing the Conflict between Mobility and Stability in Oxide Thin‐film Transistors

Solution-processed Coplanar Top-Gate ZnInSnO Thin Film Transistors and Bias Stability

Stability Study of Indium Tungsten Oxide Thin-Film Transistors Annealed under Various Ambient Conditions

Mobility–stability trade-off in oxide thin-film transistors

Enhancing the Electrical and Thermal Stability of Organic Thin-Film Transistors by Utilizing Fluorinated Polyimide and Silicon Dioxide Bilayer Gate Dielectric

Back-End-of-Line Compatible InSnO/ZnO Heterojunction Thin-Film Transistors With High Mobility and Excellent Stability

Bilayer Metal Oxide Channel Thin Film Transistor With Flat Interface Based on Smooth Transparent Nanopaper Substrate