Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Improving both performance and stability of n-type organic semiconductors by vitamin C

Vertical Organic Electrochemical Transistors for Complementary Circuits

n-Type organic semiconducting polymers: stability limitations, design considerations and applications

The Quest for Air Stability in Organic Semiconductors

Efficient and air-stable n-type doping in organic semiconductors

Editorial: High-Performance Organic Thin-Film Transistors

Oxygen‐Induced Lattice Strain for High‐Performance Organic Transistors with Enhanced Stability

Balancing the film strain of organic semiconductors for ultrastable organic transistors with a five-year lifetime

Enhancing Stability of n-Type Doped Organic Semiconductors through Low Boiling Point Solvent-Assisted Room Temperature Drying

Improving the Stability of Organic Solar Cells: From Materials to Devices

The Effect of Organic Semiconductor Electron Affinity on Preventing Parasitic Oxidation Reactions Limiting Performance of n‐Type Organic Electrochemical Transistors

Stability of organic solar cells: toward commercial applications

How can we improve the stability of organic solar cells from materials design to device engineering?

Stability Of Organic Solar Cells: Challenges And Strategies

Revealing the Role of Polaron Distribution on the Performance of n-Type Organic Electrochemical Transistors

Powering the Future: A Critical Review of Research Progress in Enhancing Stability of High‐Efficiency Organic Solar Cells

Unraveling the crucial role of trace oxygen in organic semiconductors

Co 2+ -Tuned Tin Oxide Interfaces for Enhanced Stability of Organic Solar Cells

Enhanced Stability of N‐Type Organic Electrochemical Transistors Via Small‐Molecule Passivation

Eliminating the Burn-in Loss of Efficiency in Organic Solar Cells by Applying Dimer Acceptors as Supramolecular Stabilizers

Transparent polymer nanoheterostructure films for flexible low-power organic transistors with high mobility, decent photostability, and ultralong-term air stability