Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

Soft Error Simulation of Near-Threshold SRAM Design for Nanosatellite Applications

A Novel Soft Error Immunity SRAM Cell

Zero-Hardened SRAM Cells to Improve Soft Error Tolerance in FPGA

SEDONUT: A Single Event Double Node Upset Tolerant SRAM for Terrestrial Applications

Soft-Error Tolerance Analysis and Optimization of Nanometer Circuits

Single-Event Multiple Effect Tolerant RHBD14T SRAM Cell Design for Space Applications

Single-Ended Near Threshold 9T SRAM for Portable Low-Power Biomedical Applications

Design and Verification of Multiple SEU Mitigated Circuits on SRAM-based FPGA System

Radiation-Hardened 0.3–0.9-V Voltage-Scalable 14T SRAM and Peripheral Circuit in 28-Nm Technology for Space Applications

A Novel Highly Reliable and Low-Power Radiation Hardened SRAM Bit-Cell Design

A near-threshold SRAM design with transient negative bit-line voltage scheme

Design and analysis of an adaptive radiation resilient RRAM subsystem for processing systems in satellites

SRAM based re-programmable FPGA for space applications

A Reliable and high performance Radiation Hardened Schmitt Trigger 12T SRAM cell for space applications

SERSim: a Soft Error Rate Simulator and a Case Study for a 32-Bit OpenRisc 1200 Microprocessor

Simulation of SEU Response of Advanced 20 Nm FDSOI SRAMs

Soft errors in commercial off-the-shelf static random access memories

Near-Threshold Sram Design On 40-Nm Cmos Technology For Low Power Design

Radiation-Hardened 14T SRAM Bitcell with Speed and Power Optimized for Space Application

A systematic design methodology for yield-driven near-threshold SRAM design

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs