Abstract:A large amount of data needs to be stored in integrated circuits when data are being processed. The integrated circuits contain a large amount of static random access memory (SRAM) due to its high level of integration and speed. SRAM units should be as small as possible to achieve higher storage density. In this work, the features of single cell upsets (SCUs) and multiple cell upsets (MCUs) in a full custom SRAM are tested for a 40 nm bulk CMOS technology node, and Ge (linear energy transfer (LET) = 37.3 MeV cm2/mg), Cl (LET = 13.1 MeV cm2/mg), Al (LET = 8.6 MeV cm2/mg), O (LET = 3.1 MeV cm2/mg), and Li (LET = 0.5 MeV cm2/mg) particles are used. The test results show that the total single cell upset events are 2,000,147, 1,124,269, 413,100, 311,311, and 47,815 under the irradiation of Ge, Cl, Al, O, and Li, respectively. Moreover, due to single event upset reversal mechanism, multiple cell upsets significantly decrease. The total multiple cell upset events are 10, 4, 0, 0, and 0 under the irradiation of Ge, Cl, Al, O, and Li, respectively. There are a lot of single cell upsets appearing under Ge, Cl, Al, O, and Li exposure. The number is increasing with increasing LET, which means that well contacts still need optimization in the full custom SRAM. Close spacing of well contacts or increasing contacts are the approaches used to drain the excess carriers quickly, and error detection and correction (EDAC) is used for SRAM technology. The features show that SCUs have become a major source of soft errors for the full custom SRAM. Combining close spacing of well contacts with error detection and correction (EDAC) and a well engineering scheme are used to reduce single cell upsets, although there are a few MCUs which are inevitable. Radiation hardened by design schemes needs to be further improved.

A Novel Soft Error Immunity SRAM Cell

A Novel Circuit and Layout Design of SEU Tolerant SRAM in a 65nm CMOS Process

Zero-Hardened SRAM Cells to Improve Soft Error Tolerance in FPGA

A Novel Seu Hardened Sram Bit-Cell Design

Soft Error Hardened Memory Design for Nanoscale Complementary Metal Oxide Semiconductor Technology

SEU-hardened SRAM Cell

A Novel SEU Tolerant SRAM Data Cell Design.

A Novel Highly Reliable and Low-Power Radiation Hardened SRAM Bit-Cell Design

Simulation and Research on a 4T-Cell Based Duplication Redundancy SRAM for SEU Radiation Hardening

A Novel Single Event Upset Hardened Cmos Sram Cell

Radiation Hardened 12T SRAM with Crossbar-Based Peripheral Circuit in 28nm CMOS Technology

Verification of SEU Resistance in 65 Nm High-Performance SRAM with Dual DICE Interleaving and EDAC Mitigation Strategies

Research and Design of SEU-Hardened SRAM Chip

On Soft Error Immunity of Sequential Circuits

A Highly Reliable Radiation Hardened 8T SRAM Cell Design

Radiation-Hardened 0.3–0.9-V Voltage-Scalable 14T SRAM and Peripheral Circuit in 28-Nm Technology for Space Applications

Testing of a new type SEU-tolerant SRAM

Design of Highly Reliable 14T and 16T SRAM Cells Combined with Layout Harden Technique

Design and Analysis of Soft Error Rate in FET/CNTFET Based Radiation Hardened SRAM Cell

Characterization of Single Event Cell Upsets in a Radiation Hardened SRAM in a 40 Nm Bulk CMOS Technology

Low Power and High Write Speed SEU Tolerant SRAM Data Cell Design