Abstract:The device utilized in space application demands reliable and stable static-random-access-memory (SRAM) circuits for uninterrupted and secure operation. In this paper, we have realized radiation hardened SRAM cell using dopingless transistor (DLT) and compared its performance with junctionless transistor (JLT) SRAM cell for secure and reliable operation. For realizing DL and JLT based SRAM cell, the device–circuit co-design methodology is incorporated. To reduce the impact of single event upset (SEU), the radiation hardening by design (RHBD) approach is deployed. In this technique, the resistor–capacitor (RC) circuit or RC feedback paths are connected between the input and output of cross-coupled inverter pair of SRAM cell. Using RHBD technique, the soft error (SE) sensitivity is measured and found SRAM realized with JLT and DLT are secured from the bit flipping due to SE effect. Further, the stability and performance of SRAM cells are evaluated. It is shown that hold static noise margin (HSNM) of DLT SRAM cell is improved by 7.4% in contrast to JLT SRAM cell. While, the read and write access time of DLT SRAM cell are improved by ~ 23.6% and ~ 52.4% than JLT SRAM cell. In addition, standby leakage power of DLT SRAM cell is reduced by ~ 76% than JLT SRAM. Thus, DLT SRAM cell performs faster read and write operation and consume less power which is useful for designing high-speed energy-efficient system.

A Reliable and high performance Radiation Hardened Schmitt Trigger 12T SRAM cell for space applications

A robust radiation resistant SRAM cell for space and military applications

Single-Event Multiple Effect Tolerant RHBD14T SRAM Cell Design for Space Applications

Radiation-Hardened 0.3–0.9-V Voltage-Scalable 14T SRAM and Peripheral Circuit in 28-Nm Technology for Space Applications

SEDONUT: A Single Event Double Node Upset Tolerant SRAM for Terrestrial Applications

A highly stable and low‐cost 12T radiation hardened SRAM cell design for aerospace application

Design of Radiation Hardened SRAM Cell using Dopingless Transistor for Space Applications

A Highly Reliable Radiation Hardened 8T SRAM Cell Design

Radiation-Hardened 14T SRAM Bitcell with Speed and Power Optimized for Space Application

Research on Single Event Effect Test of a RRAM Memory and Space Flight Demonstration

Design of Highly Reliable 14T and 16T SRAM Cells Combined with Layout Harden Technique

A built-in SRAM for radiation hard CMOS pixel sensors dedicated to high energy physics experiments

Radiation Hardened 12T SRAM with Crossbar-Based Peripheral Circuit in 28nm CMOS Technology

A Novel Single Event Upset Hardened Cmos Sram Cell

A Radiation Hardened SRAM in 180-nm RHBD Technology.

Simulation and Research on a 4T-Cell Based Duplication Redundancy SRAM for SEU Radiation Hardening

Testing of a new type SEU-tolerant SRAM

A Novel Seu Hardened Sram Bit-Cell Design

An SEU Hardened 65Nm/4t-Sram Cell for High Reliable Space Applications

Single-Event-Transient Resilient Memory for DSP in Space Applications

A Novel SEU Tolerant Memory Cell for Space Applications.