Abstract:We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the deposition pressure from 2 to 9 mTorr while keeping a nearly stoichiometric composition of Ti(1-x)N(x) (x=0.5), the film resistivity increases, the dominant crystal orientation changes from (100) to (111), grain boundaries become clearer, and the strong compressive strain changes to weak tensile strain. The TiN films absorb a high concentration of contaminants including hydrogen, carbon, and oxygen when they are exposed to air after deposition. With the target-substrate distance set to 88 mm the contaminant levels increase from ~0.1% to ~10% as the pressure is increased from 2 to 9 mTorr. The contaminant concentrations also correlate with in-plane distance from the center of the substrate and increase by roughly two orders of magnitude as the target-substrate distance is increased from 88 mm to 266 mm. These contaminants are found to strongly influence the properties of TiN films. For instance, the resistivity of stoichiometric films increases by around a factor of 5 as the oxygen content increases from 0.1% to 11%. These results suggest that the sputtered TiN particle energy is critical in determining the TiN film properties, and that it is important to control this energy to obtain high-quality TiN films. Superconducting coplanar waveguide resonators made from a series of nearly stoichiometric films grown at pressures from 2 mTorr to 7 mTorr show an increase in intrinsic quality factor from ~10^4 to ~10^6 as the magnitude of the compressive strain decreases from nearly 3800 MPa to approximately 150 MPa and the oxygen content increases from 0.1% to 8%. The films with a higher oxygen content exhibit lower loss, but the nonuniformity of the oxygen incorporation hinders the use of sputtered TiN in larger circuits.

Epitaxial growth of TiN on (0001) semi-insulating 4H-SiC substrate by reactive sputtering

Epitaxial growth of TiC on (0001) 4H-SiC substrate by reactive sputtering

Heteroepitaxial growth of TiN film on MgO (100) by reactive magnetron sputtering

High-temperature Annealing Effects on Epitaxial TiN Films on 4H-Sic

Study of optical and electrical properties of TiN thin films prepared by cathodic ion sputtering

Epitaxial AlN film with improved quality on Si (111) substrates realized by boron pretreatment via MOCVD

Electrical conductivity enhancement of epitaxially grown TiN thin films

Characterization and In-situ Monitoring of Sub-stoichiometric Adjustable Tc Titanium Nitride Growth

Properties and morphology of TiN films deposited by atomic layer deposition

Microstructural and Electrical Resistivity of TiN Electrode Films Prepared by Direct Current (DC) Reactive Magnetron Sputtering

Growth and mechanical anisotropy of TiN thin films

Compositional dependence of epitaxial Tin+1SiCn MAX-phase thin films grown from a Ti3SiC2 compound target

Growth and Mechanical Properties of Amorphous and Nanostructured SiC films

Superconducting TiN Films Sputtered Over a Large Range of Substrate DC Bias

Thickness uniformity, electrical properties, and stress of sputtered TiN thin films

The Deposition of Superconducting TiN Thin Film by Using DC Magnetron Sputtering

Influence of Substrate Bias on Properties of TiN Films with X-ray Photoelectron Spectroscopy and Atomic Force Microscopy Studies

Composition and Texture of TiN Thin Films Fabricated by ECR Enhanced Sputtering Deposition

Mechanical and Corrosion Resistance of (Ti,Cr)N Grown by DC Magnetron Sputter on H13 Tool Steel

Sputtered TiN films for superconducting coplanar waveguide resonators

Superconducting TiN films grown by directional reactive evaporation