Abstract:To make a further investigation into the mass-transfer mechanism of distillation in rotating packed beds (RPBs), an improved mass-transfer model based on liquid-droplet flight, liquid-droplet impingement, and gas turbulence in a pilot-scale concentric ring rotating bed (CRRB) is developed from Li’s mass-transfer model of distillation. The CCRB belongs to a type of RPB. Total reflux distillation experiments are carried out in a pilot-scale CCRB using the ethanol–water system. With the improved model and experimental data, radial distributions of liquid-droplet flying and impinging mass-transfer coefficients, local liquid- and gas-side mass-transfer coefficients, and overall volumetric gas-side mass-transfer coefficient in the rotor and casing are obtained. The improved model can accurately describe the actual mass transfer occurring in the pilot-scale CRRB. It is found that the liquid-droplet flying mass transfer has a significant contribution to the liquid-side mass transfer, and there exist gas-side end zones with excellent mass-transfer efficiency at the inner periphery of the rotor and in the casing. The total reflux distillation of the pilot-scale CRRB is basically gas-side-controlled. Also, experiments of measuring liquid distribution at the outer periphery of the pilot-scale CCRB rotor are conducted by capturing liquid trajectories on paperboards. Results show that a good and uniform liquid distribution exists at the outer periphery of the rotor, which results from the existence of the tangential slip velocity of liquid on the inner wall of the concentric ring in the pilot-scale CRRB. The improved mass-transfer model that reveals the mass-transfer mechanism of RPB distillation will significantly facilitate the industrial application of RPB in distillation.

Redirecting liquid momentum in rotating-packed-bed midway packing to enhance gas–liquid mass transfer: Modelling and application based on liquid-capture mechanism in end-effect zone

Liquid-solid mass transfer in a rotating packed bed reactor with structured foam packing

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Mass transfer modeling for viscous fluids in a disk-distributor rotating packed bed

Improved Mass-Transfer Model for Distillation in a Pilot-Scale Concentric Ring Rotating Bed as a Rotating Packed Bed

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

Realization and Control of Multiple Temperature Zones in Liquid‐containing Gas–solid Fluidized Bed Reactor

3D CFD simulation of the liquid flow in a rotating packed bed with structured wire mesh packing

Computational fluid dynamic simulation of fluid flow in a rotating packed bed

A turbulent mass diffusivity model for analyzing the mixing characteristics in an impinging stream-rotating packed bed

A porous medium approach to the 3D modelling of an entire rotating packed bed for post-combustion carbon capture

Investigation of Effective Interfacial Area in Micropacked Bed Reactors

Liquid dispersion behaviors in a rotating packed bed with different packing arrangements: A comparison study

Modeling selective absorption of H 2 S from a gas mixture containing CO 2 within rotating packed bed based on surface renewal theory

Modelling of 3D liquid dispersion in a rotating packed bed using an Eulerian porous medium approach

Research and development of advanced structured packing in a rotating packed bed

Gas-Liquid Mass Transfer Characteristics in a Rotating-Drum Bioreactor

Impact of the Channel- to Particle-Diameter Ratio on the Liquid-Liquid Mass Transfer and Pressure Drop in Micro Packed Bed Reactors

Dynamics of liquid dispersion in a rotating packed bed with single‐layer wire mesh

Advances in design, scale and operability of the Rotating Liquid Sheet (RLS) contactor: Pressure drop, flood-point and mass transfer – comparison to random packing

Liquid–liquid mass transfer and pressure drop behavior in micro‐packed beds with different shaped packings