Abstract:To make a further investigation into the mass-transfer mechanism of distillation in rotating packed beds (RPBs), an improved mass-transfer model based on liquid-droplet flight, liquid-droplet impingement, and gas turbulence in a pilot-scale concentric ring rotating bed (CRRB) is developed from Li’s mass-transfer model of distillation. The CCRB belongs to a type of RPB. Total reflux distillation experiments are carried out in a pilot-scale CCRB using the ethanol–water system. With the improved model and experimental data, radial distributions of liquid-droplet flying and impinging mass-transfer coefficients, local liquid- and gas-side mass-transfer coefficients, and overall volumetric gas-side mass-transfer coefficient in the rotor and casing are obtained. The improved model can accurately describe the actual mass transfer occurring in the pilot-scale CRRB. It is found that the liquid-droplet flying mass transfer has a significant contribution to the liquid-side mass transfer, and there exist gas-side end zones with excellent mass-transfer efficiency at the inner periphery of the rotor and in the casing. The total reflux distillation of the pilot-scale CRRB is basically gas-side-controlled. Also, experiments of measuring liquid distribution at the outer periphery of the pilot-scale CCRB rotor are conducted by capturing liquid trajectories on paperboards. Results show that a good and uniform liquid distribution exists at the outer periphery of the rotor, which results from the existence of the tangential slip velocity of liquid on the inner wall of the concentric ring in the pilot-scale CRRB. The improved mass-transfer model that reveals the mass-transfer mechanism of RPB distillation will significantly facilitate the industrial application of RPB in distillation.

Improved Mass-Transfer Model for Distillation in a Pilot-Scale Concentric Ring Rotating Bed as a Rotating Packed Bed

Mass transfer modeling for viscous fluids in a disk-distributor rotating packed bed

CFD-PBM Investigation on Droplet Size Distribution in a Liquid–Liquid Stirred Tank: Effect of Impeller Type

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Computational fluid dynamic simulation of fluid flow in a rotating packed bed

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Redirecting liquid momentum in rotating-packed-bed midway packing to enhance gas–liquid mass transfer: Modelling and application based on liquid-capture mechanism in end-effect zone

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Study on the Numerical Model of Gas-Liquid Dispersion Driven by a Coaxial Mixer

3D CFD simulation of the liquid flow in a rotating packed bed with structured wire mesh packing

A turbulent mass diffusivity model for analyzing the mixing characteristics in an impinging stream-rotating packed bed

Comprehensive Analysis of Pressure Drop Phenomena in Rotating Packed Bed Distillation: An In-Depth Investigation

A methodology for the analysis of distillation processes within rotating packed beds based on local temperature measurements

Gas-Liquid Mass Transfer Characteristics in a Rotating-Drum Bioreactor

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

CFD simulation of liquid flow characteristics in a rotor-stator spinning disc reactor

Modelling of 3D liquid dispersion in a rotating packed bed using an Eulerian porous medium approach

Dynamics of liquid dispersion in a rotating packed bed with single‐layer wire mesh

Liquid-solid mass transfer in a rotating packed bed reactor with structured foam packing