Abstract:The gas-solid vertical single helical ribbon agitated reactor is widely used in the polypropylene industry. The gas flow and mass transfer determine the heat transfer capacity and product quality. In this work, the pressure drop was measured below and above minimum fluidization velocity (umf). Then, the axial and radial dispersion coefficients (DL and DR) were estimated below umf by measuring the step residence time distribution and the stationary radial tracer profiles, respectively. Pressure analysis show the agitation significantly reduces the bed pressure drop, changing the fixed bed below umf and bubbling bed above umf to an agitated bed with a periodic voidage. The DL was proportional to the gas velocity, with little influences of the stirring speed. The radial tracer profiles show the bed is divided by the inner diameter of the helical ribbon into the peripheral ascending region and the central descending region, without gas exchange between them. Furthermore. the tracer profiles in the descending region are classified into two types. For type I, the DR, calculated by the plug flow model with radial dispersion, is proportional to the gas velocity, with little effects of stirring speed. Type II shows uniform profiles due to the deflection of the gas flow toward the low pressure area at the inner diameter of helical ribbon. The causes of the two types are explained by the relative size of particle circulation and gas flux. These two flow regimes are quantitatively clarified with an empirical correlation of Re and Fr as flow regime transition boundary, namely dispersed plug flow and perfect mixing flow. With lower Re and higher Fr, it changes from dispersed plug flow to perfect mixing flow.

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Integration of CFD and Polymerization for an Industrial Scale Cis-Polybutadiene Reactor

Effect of Temperature Switching and Dynamic Phase Equilibrium on Polymer Microstructure in Condensed-Mode Operation

Particle movement characteristics in a gas-solid vertical single helical ribbon agitated reactor

Important Mesoscale Phenomena in Gas Phase Fluidized Bed Ethylene Polymerization

Investigation of a Dynamic Operation Mode of Ethylene Polymerization Process with a Liquid-Containing Fluidized Bed

Stability Analysis Of Ethylene Polymerization In A Liquid-Containing Gas-Solid Fluidized Bed Reactor

Control of Diffusion/Barrier Effects of Polymer-Coated Particles and the Strengthening of Ethylene Polymerization Reactor

Determination of Acclivitous Angle of Bed Level in Horizontal Stirred Bed Reactor for Polypropylene by Acoustic Emission Measurement

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Collision Characterization of Mixed Hydrocarbon Liquid Droplets with Polyethylene Particles

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

Modeling and simulation of polypropylene particle size distribution in industrial horizontal stirred bed reactors

A Fundamental CFD Study of the Gas–solid Flow Field in Fluidized Bed Polymerization Reactors

3D CFD-PBM Modeling of the Gas–solid Flow Field in a Polydisperse Polymerization FBR: the Effect of Drag Model

Modeling and steady state multiplicity analysis of gas phase polypropylene horizontal stirred bed reactor

Study of Particle Size Distribution in Polypropylene Loop Reactor

Numerical Simulation of the Gas−Solid Flow in Fluidized-Bed Polymerization Reactors

Process Intensification of Mixing and Chemical Modification for Polymer Solutions in Microreactors Based on Gas-Liquid Two-Phase Flow

Particle dynamics in horizontal stirred bed reactors characterized by single-photon emission radioactive particle tracking

A Computational Fluid Dynamics Model Coupled with Ethylene Polymerization Kinetics for Fluidized Bed Polyethylene Reactor