Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

A turbulent mass diffusivity model for analyzing the mixing characteristics in an impinging stream-rotating packed bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Study on the Numerical Model of Gas-Liquid Dispersion Driven by a Coaxial Mixer

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Modelling of 3D liquid dispersion in a rotating packed bed using an Eulerian porous medium approach

Computational fluid dynamic simulation of fluid flow in a rotating packed bed

Computational Fluid Dynamic(cfd) Simulation of Micromixing in a Rotating Packed Bed

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

3D CFD simulation of the liquid flow in a rotating packed bed with structured wire mesh packing

Mass transfer modeling for viscous fluids in a disk-distributor rotating packed bed

Improved Mass-Transfer Model for Distillation in a Pilot-Scale Concentric Ring Rotating Bed as a Rotating Packed Bed

CFD Simulation of the Mixing and Dispersing of Floating Particles in a Viscous System

Redirecting liquid momentum in rotating-packed-bed midway packing to enhance gas–liquid mass transfer: Modelling and application based on liquid-capture mechanism in end-effect zone

Model and Experimental Study of Relationship Between Solid Fraction and Back-Mixing in a Fluidized Bed

Liquid-solid mass transfer in a rotating packed bed reactor with structured foam packing

Numerical Analysis of Gas-Liquid Mixed Transport Process in a Multiphase Rotodynamic Pump

Numerical Simulation of Turbulent Flow and Mixing in Gas-Liquid-Liquid Stirred Tanks

Numerical investigation on mixing performance in rod bundle with spacer grid based on anisotropic turbulent mixing model

Modeling selective absorption of H 2 S from a gas mixture containing CO 2 within rotating packed bed based on surface renewal theory

Simulation of the Behavior of Gas-Solid Flow in a Novel Rotating Fluidized Bed in a Static Geometry

Numerical Simulation of a Packed Bed Reactor with Novel Internals—Ⅰ. Flow Field and Residence Time Distribution of Gas Phase