Abstract:Acidic gases such as H 2 S and CO 2 are generated in the refineries during coal gasification. These pollutant gases need to be treated before releasing to the atmosphere. Conventionally, H 2 S gas is treated by Claus process in which H 2 S is converted to elemental S and H 2 O, in presence of O 2 at ∼1,200 K. In the present energy scenarios, hydrogen has got importance as a source of clean fuel for industrial application. The H 2 S generated in the refineries can be a potential precursor of hydrogen. If this hydrogen can be obtained by thermal decomposition of H 2 S, that can increase the overall economic value of the H 2 S containing streams and the produced hydrogen can be used for hydrocracking and hydro-treating in refineries, as well as to synthesize value-added products for chemical industries. However, H 2 S thermal decomposition is an endothermic and equilibrium limited reaction (equilibrium conversion is only ∼15 % at 1,000 K), requiring a very high temperature (∼1,500 K) to achieve even a conversion of greater than 40 %. Packed Bed Catalytic Membrane Reactor (PBCMR) for thermal decomposition of H 2 S can be a potential technology augmentation and process intensification to increase this equilibrium conversion. In this work, modeling and experimental studies of H 2 S thermal decomposition using in-house designed & developed PBCMR have been carried out. The modeling studies were validated with experimental data. Clay-alumina ceramic tubular membrane (L: 250 mm; OD: 12 mm; thickness: 2 mm) was fabricated using extrusion process having an average membrane pore size of ∼1 μm and with a porosity of ∼20 %. Pt (2 %) coated alumina extrudes were used as catalyst to accelerate the reaction kinetics. Experimental studies showed that H 2 S to hydrogen conversion of ∼90 % is achieved using PBCMR at ∼1,523 K, compared to only ∼40 % conversion in a conventional packed bed tubular reactor (without membrane). Modelling studies were carried out to study the influence of operating parameters such as, reactor wall temperature, feed temperature, pressure and feed velocity. Studies showed that reactor wall temperature is having the most dominant effect on H 2 S conversion, which is confirmed by experimental findings. The studies offer useful insights into the application of PBCMR technology for management of waste gas stream containing H 2 S and recovery of hydrogen.

Modeling selective absorption of H 2 S from a gas mixture containing CO 2 within rotating packed bed based on surface renewal theory

Reconfiguration of Acid Gas Removal Process Matching the Integration of Coal Chemical Industry with Green Hydrogen

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Simultaneous absorption of H 2 S, MM and COS into a novel SRSG absorbent using a rotating packed bed

Selective Removal of H2S over CO2 in a Membrane Gas–liquid Microdisperison Microreactor

Redirecting liquid momentum in rotating-packed-bed midway packing to enhance gas–liquid mass transfer: Modelling and application based on liquid-capture mechanism in end-effect zone

Absorption of Sulphur Dioxide with Sodium Citrate Buffer Solution in a Rotating Packed Bed

Radially Layered Configuration for Improved Performance of Packed Bed Reactors

A turbulent mass diffusivity model for analyzing the mixing characteristics in an impinging stream-rotating packed bed

Dynamic modeling of the absorption of acetic acid in rotating packed bed

Selective Absorption of H2S from a Gas Mixture with CO2 in a Microporous Tube-in-tube Microchannel Reactor

Desulfurization performance in a HiGee reactor with packing containing different fiber cross-sectional shapes

Modeling & experimental studies on enhancement of H 2 S conversion using catalytic membrane reactor for hydrogen production

Rate-based model for predicting and evaluating H2S absorption in the haloalkaliphilic biological desulfurization process

Simulation of Flue Gas Desulfurization by Rotating Packed Bed Filled with Holed Disk Packing and Gas Resistance in the Process

Computational modelling and optimization of physicochemical absorption of CO2 in rotating packed bed

MODEL OF SIMULTANEOUS ABSORPTION OF SULFUR DIOXIDE AND OXYGEN IN AQUEOUS SOLUTION CONTAINING Mn2+ IN ROTATING PACKED BED

Improved Mass-Transfer Model for Distillation in a Pilot-Scale Concentric Ring Rotating Bed as a Rotating Packed Bed

Mass transfer modeling for viscous fluids in a disk-distributor rotating packed bed

A porous medium approach to the 3D modelling of an entire rotating packed bed for post-combustion carbon capture