Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

Simulation of the Behavior of Gas-Solid Flow in a Novel Rotating Fluidized Bed in a Static Geometry

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Effect of Agitation on the Fluidization Behavior of a Gas–solid Fluidized Bed with a Frame Impeller

Novel Phase Inversion Model for Gas–solid Turbulent Fluidized Beds

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Numerical Simulation Of The Gas-Solid Flow In A Square Circulating Fluidized Bed With Secondary Air Injection

A quasi-three-phase approach for simulating gas-solid fluidized bed under different flow patterns

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

Hydrodynamic characteristics of a rectangular gas-driven inverse liquid-solid fluidized bed

LES-DEM Investigation of Gas–solid Flow Dynamics in an Internally Circulating Fluidized Bed

Discrete Particle Simulation and Visualized Research of the Gas−Solid Flow in an Internally Circulating Fluidized Bed

Numerical Simulation of the Characteristics of Particle Flows in an Internally Circulating Fluidized Bed

Computational fluid dynamic simulation of fluid flow in a rotating packed bed

Numerical Simulation Of The Gas-Solid Flow In An Internally Circulating Fluidized Bed With A Dem- Cfd Model

Numerical Investigation of Gas–solid Flow Behavior in a Novel Integral Multi-Jet Spout-Fluidized Bed

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review