Abstract:To make a further investigation into the mass-transfer mechanism of distillation in rotating packed beds (RPBs), an improved mass-transfer model based on liquid-droplet flight, liquid-droplet impingement, and gas turbulence in a pilot-scale concentric ring rotating bed (CRRB) is developed from Li’s mass-transfer model of distillation. The CCRB belongs to a type of RPB. Total reflux distillation experiments are carried out in a pilot-scale CCRB using the ethanol–water system. With the improved model and experimental data, radial distributions of liquid-droplet flying and impinging mass-transfer coefficients, local liquid- and gas-side mass-transfer coefficients, and overall volumetric gas-side mass-transfer coefficient in the rotor and casing are obtained. The improved model can accurately describe the actual mass transfer occurring in the pilot-scale CRRB. It is found that the liquid-droplet flying mass transfer has a significant contribution to the liquid-side mass transfer, and there exist gas-side end zones with excellent mass-transfer efficiency at the inner periphery of the rotor and in the casing. The total reflux distillation of the pilot-scale CRRB is basically gas-side-controlled. Also, experiments of measuring liquid distribution at the outer periphery of the pilot-scale CCRB rotor are conducted by capturing liquid trajectories on paperboards. Results show that a good and uniform liquid distribution exists at the outer periphery of the rotor, which results from the existence of the tangential slip velocity of liquid on the inner wall of the concentric ring in the pilot-scale CRRB. The improved mass-transfer model that reveals the mass-transfer mechanism of RPB distillation will significantly facilitate the industrial application of RPB in distillation.

Gas-Liquid Mass Transfer Characteristics in a Rotating-Drum Bioreactor

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Measuration of Gas-Liquid Interfacial Area in Rotating Drum Reactor by Chemical Method

Mass transfer correlations for rotating drum bioreactors

Modeling of gas–liquid mass transfer in a stirred tank bioreactor agitated by a Rushton turbine or a new pitched blade impeller

Residence time distributions of gas flowing through rotating drum bioreactors

Experimental Study on Gas–liquid Dispersion and Mass Transfer in Shear-Thinning System with Coaxial Mixer

Improved Mass-Transfer Model for Distillation in a Pilot-Scale Concentric Ring Rotating Bed as a Rotating Packed Bed

Oxygen transfer characteristics and operational performance of rotating drum biological contactor

Mass Transfer, Gas Holdup, and Kinetic Models of Batch and Continuous Fermentation in a Novel Rectangular Dynamic Membrane Airlift Bioreactor

Characteristics of three-phase internal loop airlift bioreactors with complete gas recirculation for non-Newtonian fluids

Liquid-solid mass transfer in a rotating packed bed reactor with structured foam packing

The Study of Fluid Dynamics Simulation of the Internal Flow Field in a Novel Airlift Oscillation Loop Bioreactor

Bubble Diameter, Mass Transfer, and Bioreaction of Dynamic Membrane-Stirred Reactors

Gas–liquid mass transfer behavior in three-phase CFB reactors

An Investigation of Mass Transfer Characteristics of a Dynamic Bioreactor

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Experimental study on gas-liquid flow regimes of coaxial mixers equipped with a Rushton/pitched blade turbine and anchor

Redirecting liquid momentum in rotating-packed-bed midway packing to enhance gas–liquid mass transfer: Modelling and application based on liquid-capture mechanism in end-effect zone

Liquid-liquid flow pattern and mass transfer in a rotating millimeter channel reactor