Abstract:Microreactors have been demonstrated to become an effective tool for increasing mass and heat transfer in heterogeneous chemical processes that are unachievable in batch or continuous stirred tank reactors. The key to superior performance is the availability of a large specific surface area (A/V) in the microsystem for mass and heat transfer between phases. Among the flow patterns generated in the two-phase liquid-liquid flow, slug is an ideal flow with a high stability characteristic, regular velocity, and uniform dimension throughout a microchannel system. The flow behavior gives slugs great potential to increase mass and heat transfer between phases, so optimizing the utilization of microreactors in many chemical process applications needs an in-depth understanding of the liquid-liquid hydrodynamic. Therefore, the current work aims to determine the mass transfer coefficient under liquid-liquid slug flow and the influence of slug dimensions, channel material, volumetric flow rate, and the flow rate ratio of the organic-aqueous phase on the mass transfer coefficient. The experiments were performed in 1 mm (ID) circular PTFE and silicone tubes, with a 30-40 ml/hour flow rate, and sodium hydroxide concentrations of 0.1, 0.13, and 0.15 M were used. The results exhibit that the most prominent overall mass transfer coefficient was 0.121/s, attained at 0.15 M sodium hydroxide concentration, with 40 ml/hour total discharge within the silicone channel. Microchannels generated smaller slug sizes at a higher aqueous phase flow rate than the organic phase. The smaller size provided a large specific surface area (A/V) for enhancing the mass transfer coefficient .

Liquid-liquid flow pattern and mass transfer in a rotating millimeter channel reactor

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

EFFECTS OF INLET ARRANGEMENTS ON LIQUID-LIQUID FLOW PATTERNS IN CROSS-JUNCTION SQUARE MICROCHANNELS

Liquid–liquid flow characteristics and mass transfer enhancement in a Taylor–Couette microreactor

Mass Transfer Phenomena Of Partially Miscible Liquids Under Liquid-Liquid Slug Flow In A Circular Microchannel

Effect of Mixing on Mass Transfer Characterization in Continuous Slugs and Dispersed Droplets in Biphasic Slug Flow Microreactors

Investigation of Mass-Transfer Performance for Biodiesel Reaction in Microchannel Reactor using Volume-of-Fluid with Species-Transport Model

Numerical investigation of mass transfer behavior of a gas–liquid two‐phase Taylor flow in a microchannel by a volume‐of‐fluid multiphase flow system

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Liquid-liquid Flow and Mass Transfer Characteristics in a Miniaturized Annular Centrifugal Device

Liquid–liquid microflows and mass transfer performance in slit-like microchannels

Enhancement of Mass Transfer Performance of Liquid–liquid System by Droplet Flow in Microchannels

Mixing Performance and Drug Nano-Particle Preparation Inside Slugs in a Gas–liquid Microchannel Reactor

Characterization of Liquid-Liquid Two-Phase Flow Patterns and Mass Transfer Coefficients in Human-Shaped Microchannels

Gas–liquid–liquid Slug Flow and Mass Transfer in Hydrophilic and Hydrophobic Microreactors

Experimental Investigation of Dynamic Mass Transfer During Droplet Formation Using Micro-Lif in a Coaxial Microchannel

Hydrodynamics and Local Mass Transfer Characterization under Gas–liquid–liquid Slug Flow in a Rectangular Microchannel

Mass transfer mechanism and relationship of gas–liquid annular flow in a microfluidic cross-junction device

Liquid Flow and Mass Transfer Behaviors in a Butterfly-Shaped Microreactor