Abstract:Open-cell foams are potential materials for increasing mass transfer in packed-beds due to their large porosity, tortuosity, and great surface area. A novel purpose of mass transfer intensification in open-cell materials is developed in a Three-Phase Fixed Bed (TPFB) reactor. TPFB reactors filled with Open-Cell Foam Particles (OFPs) represent an important breakthrough in industrial applications. The use of OFPs beds receives more and more scientific and industrial interest as a catalyst support. In this context, the objective of this work is to describe an experimental and theoretical approach for the Residence Time Distribution (RTD) of CO2 tracer in a TPFB reactor on an OFPs bed. An investigation of a three-phase model shows that different gas and liquid flow rates in the TPFB reactor on the OFPs bed enhance the hydrodynamic characteristics and, therefore, improve the gas–liquid and liquid–solid mass coefficients due to the high external surface area of OFPs. The nonlinear Levenberg–Marquardt method was used to estimate the chosen physical parameters of the developed mathematical model. The RTD curves of the experimental data were adjusted to the proposed mathematical model by applying the nonlinear regression method to optimize the chosen physical parameters. As results, the gas–liquid and liquid–solid mass transfer coefficients on the OFPs bed are directly proportional to the gas and liquid flow rates, i.e., as the gas and liquid flow rates are decreased, gas–liquid and liquid–solid mass transfer coefficients are also reduced. On the other hand, the external wetting efficiency is inversely proportional, i.e., as gas and liquid flow rates are reduced, the external wetting efficiency is increased.

Investigation of Effective Interfacial Area in Micropacked Bed Reactors

Heat Transfer Characteristics Analysis and Optimization of the Micro Packed Bed Bionic Reactor

Hydrodynamics and mass transfer of gas–liquid flow in micropacked bed reactors with metal foam packing

Mixing characteristics of fixed bed bubble reactor

Local and global gas-liquid mass transfer in a micro-packed bed reactor utilizing a noninvasive colorimetric technique

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Investigation of External Mass Transfer in a Micropacked Bed Reactor with a Pd/Al2O3/Nickel Foam

Automated measurements of gas‐liquid mass transfer in micropacked bed reactors

Impact of the Channel- to Particle-Diameter Ratio on the Liquid-Liquid Mass Transfer and Pressure Drop in Micro Packed Bed Reactors

Nature and Characteristics of Gas–liquid Flow Regimes in a Micro‐packed Bed Reactor

Hydrodynamics and liquid–solid mass transfer in micropacked bed reactors with copper foam packing

External Mass Transfer Performance Studies in a Micropacked Bed Reactor with Pd/PDA/Nickel Foam

An experimental investigation of gas-liquid-solid transfer and external wetting efficiency on open-cell foam in a three-phase packed bed reactor: validation and parameter estimation

Measuration of Gas-Liquid Interfacial Area in Rotating Drum Reactor by Chemical Method

Investigation of External Mass Transfer in Micropacked Bed Reactors

Liquid holdup of gas–liquid two‐phase flow in micro‐packed beds reactors

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

[Gas-Liquid Mass Transfer in Three-Phase Inverse Turbulent Bed Reactor].

Hydrodynamics and Droplet Size Distribution of Liquid–liquid Flow in a Packed Bed Reactor with Orifice Plates

Experimental study on gas–liquid interfacial area and mass transfer coefficient in three-phase circulating fluidized beds