Abstract:The gas-solid vertical single helical ribbon agitated reactor is widely used in the polypropylene industry. The gas flow and mass transfer determine the heat transfer capacity and product quality. In this work, the pressure drop was measured below and above minimum fluidization velocity (umf). Then, the axial and radial dispersion coefficients (DL and DR) were estimated below umf by measuring the step residence time distribution and the stationary radial tracer profiles, respectively. Pressure analysis show the agitation significantly reduces the bed pressure drop, changing the fixed bed below umf and bubbling bed above umf to an agitated bed with a periodic voidage. The DL was proportional to the gas velocity, with little influences of the stirring speed. The radial tracer profiles show the bed is divided by the inner diameter of the helical ribbon into the peripheral ascending region and the central descending region, without gas exchange between them. Furthermore. the tracer profiles in the descending region are classified into two types. For type I, the DR, calculated by the plug flow model with radial dispersion, is proportional to the gas velocity, with little effects of stirring speed. Type II shows uniform profiles due to the deflection of the gas flow toward the low pressure area at the inner diameter of helical ribbon. The causes of the two types are explained by the relative size of particle circulation and gas flux. These two flow regimes are quantitatively clarified with an empirical correlation of Re and Fr as flow regime transition boundary, namely dispersed plug flow and perfect mixing flow. With lower Re and higher Fr, it changes from dispersed plug flow to perfect mixing flow.

Local and global gas-liquid mass transfer in a micro-packed bed reactor utilizing a noninvasive colorimetric technique

Nature and Characteristics of Gas–liquid Flow Regimes in a Micro‐packed Bed Reactor

Heat Transfer Characteristics Analysis and Optimization of the Micro Packed Bed Bionic Reactor

Mass Transfer Characterization for Hydrocarbon Liquid–particle Collision Based on Sensitive Tracing of Fluorescent Probe

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Investigation of Effective Interfacial Area in Micropacked Bed Reactors

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Hydrodynamics and mass transfer of gas–liquid flow in micropacked bed reactors with metal foam packing

Impact of the Channel- to Particle-Diameter Ratio on the Liquid-Liquid Mass Transfer and Pressure Drop in Micro Packed Bed Reactors

[Gas-Liquid Mass Transfer in Three-Phase Inverse Turbulent Bed Reactor].

Effect of Mixing on Mass Transfer Characterization in Continuous Slugs and Dispersed Droplets in Biphasic Slug Flow Microreactors

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Liquid holdup of gas–liquid two‐phase flow in micro‐packed beds reactors

The gas–liquid mass transfer and pressure drop behaviors of the gas–liquid–liquid three‐phase flow in micro‐packed beds

Gas-Liquid Mass Transfer in Microbubble Column Reactors

Automated measurements of gas‐liquid mass transfer in micropacked bed reactors

Liquid-solid mass transfer in a rotating packed bed reactor with structured foam packing

A Colorimetric Technique to Characterize Mass Transfer During Liquid-Liquid Slug Flow in Circular Capillaries

Hydrodynamics and Local Mass Transfer Characterization under Gas–liquid–liquid Slug Flow in a Rectangular Microchannel

Mass transfer mechanism and relationship of gas–liquid annular flow in a microfluidic cross-junction device

Liquid-liquid flow pattern and mass transfer in a rotating millimeter channel reactor