Abstract:Volatile organic compounds (VOCs) emitted into the atmosphere negatively affect the environment and human health. Biotrickling filtration, an effective technology for treating VOC-laden waste gases, faces challenges in removing hydrophobic VOCs due to their low water solubility and therefore limited bioavailability to microorganisms. Consequently, the addition of (bio)surfactants has proven to be a promising strategy to enhance the removal of hydrophobic VOCs in biotrickling filters (BTFs). Yet, up to now, no single study has ever performed a mass transfer characterization of a BTF under (bio)surfactants addition. In this study, the effect of (bio)surfactant addition on the gas-liquid mass transfer characteristics of two BTFs was measured by using oxygen (O2) as a model gas. Through an empirical correlation, the mass transfer coefficients (kLa) of two hydrophobic VOCs, toluene and hexane, which are of industrial and environmental significance, were estimated. One BTF was filled with expanded perlite, while the other with a mixture of compost and wood chips (C + WC). Both BTFs were operated under different liquid velocities (UL: 0.95 and 1.53 m h-1). Saponin, a biological surfactant, and Tween 80, a synthetic surfactant, were added to the recirculating liquid at different critical micelle concentrations (CMCs: 0-3 CMC). The higher interfacial and surface area of the perlite BTF compared to the C + WC BTF led to higher kLaO2 values regardless of the operational condition: 308 ± 18-612 ± 19 h-1 versus 42 ± 4-177 ± 24 h-1, respectively. Saponin addition at 0.5 and 1 CMC had positive effects on the perlite BTF, with kLaO2 values two times higher compared to those at 0 CMC. Tween 80 exhibited a neutral or slightly positive effect on the mass transfer of both BTFs under all conditions. Overall, the CMC, along with the physical characteristics of the packing materials and the operational conditions evaluated explained the results obtained. This study provides fundamental data essential to improve the performance and design of BTFs for hydrophobic VOCs abatement.

An experimental investigation of gas-liquid-solid transfer and external wetting efficiency on open-cell foam in a three-phase packed bed reactor: validation and parameter estimation

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Effect of high solids loading on gas–liquid mass transfer in an oscillatory flow reactor for process intensification

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Investigation of Effective Interfacial Area in Micropacked Bed Reactors

Liquid-solid mass transfer in a rotating packed bed reactor with structured foam packing

Experimental study on gas–liquid interfacial area and mass transfer coefficient in three-phase circulating fluidized beds

Hydrodynamics and mass transfer of gas–liquid flow in micropacked bed reactors with metal foam packing

Automated measurements of gas‐liquid mass transfer in micropacked bed reactors

[Gas-Liquid Mass Transfer in Three-Phase Inverse Turbulent Bed Reactor].

External Mass Transfer Performance Studies in a Micropacked Bed Reactor with Pd/PDA/Nickel Foam

Investigation of External Mass Transfer in a Micropacked Bed Reactor with a Pd/Al2O3/Nickel Foam

Influence of Foam Morphology on Flow and Heat Transport in a Random Packed Bed with Metallic Foam Pellets-An Investigation Using CFD

Experimental study on bubble behavior in gas–liquid–solid three-phase circulating fluidized beds

Gas-liquid mass transfer in a gas–liquid-solid three-phase moving bed

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

CFD-PBM simulations the effect of aeration rates on hydrodynamics characteristics in a gas-liquid-solid aerobic fluidized bed biofilm reactor

Effect of surfactant type and concentration on the gas-liquid mass transfer in biotrickling filters used for air pollution control

The gas–liquid mass transfer and pressure drop behaviors of the gas–liquid–liquid three‐phase flow in micro‐packed beds

Liquid–Liquid Mass Transfer Enhancement in Milliscale Packed Beds