Abstract:Open-cell foams are potential materials for increasing mass transfer in packed-beds due to their large porosity, tortuosity, and great surface area. A novel purpose of mass transfer intensification in open-cell materials is developed in a Three-Phase Fixed Bed (TPFB) reactor. TPFB reactors filled with Open-Cell Foam Particles (OFPs) represent an important breakthrough in industrial applications. The use of OFPs beds receives more and more scientific and industrial interest as a catalyst support. In this context, the objective of this work is to describe an experimental and theoretical approach for the Residence Time Distribution (RTD) of CO2 tracer in a TPFB reactor on an OFPs bed. An investigation of a three-phase model shows that different gas and liquid flow rates in the TPFB reactor on the OFPs bed enhance the hydrodynamic characteristics and, therefore, improve the gas–liquid and liquid–solid mass coefficients due to the high external surface area of OFPs. The nonlinear Levenberg–Marquardt method was used to estimate the chosen physical parameters of the developed mathematical model. The RTD curves of the experimental data were adjusted to the proposed mathematical model by applying the nonlinear regression method to optimize the chosen physical parameters. As results, the gas–liquid and liquid–solid mass transfer coefficients on the OFPs bed are directly proportional to the gas and liquid flow rates, i.e., as the gas and liquid flow rates are decreased, gas–liquid and liquid–solid mass transfer coefficients are also reduced. On the other hand, the external wetting efficiency is inversely proportional, i.e., as gas and liquid flow rates are reduced, the external wetting efficiency is increased.

External Mass Transfer Performance Studies in a Micropacked Bed Reactor with Pd/PDA/Nickel Foam

Investigation of External Mass Transfer in a Micropacked Bed Reactor with a Pd/Al2O3/Nickel Foam

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Investigation of Hydrogenation and Mass Transfer Performance in Micropacked Beds with Highly Active Monolithic Catalysts

Hydrodynamics and mass transfer of gas–liquid flow in micropacked bed reactors with metal foam packing

Investigation of Effective Interfacial Area in Micropacked Bed Reactors

Preparation of Pd/Al2O3/Nickel Microfoam Catalysts by Electrodeposition for Hydrogenation in a Micropacked Bed Reactor

Investigation of External Mass Transfer in Micropacked Bed Reactors

Development of Centrifugal Coating Device to Load CuZnZr/γ-Al2O3 Catalyst on Porous Substrates for Methanol Steam Reforming

Liquid-solid mass transfer in a rotating packed bed reactor with structured foam packing

Novel Packed Bed Reactor Designed for Prileschajew Epoxidation of Fatty Acid Methyl Ester: Intensification of Mass/heat Transfer

Influence of Foam Morphology on Flow and Heat Transport in a Random Packed Bed with Metallic Foam Pellets-An Investigation Using CFD

A Study of the Heat Transfer Characteristics of Novel Ni‐foam Structured Catalysts

Hydrodynamics and liquid–solid mass transfer in micropacked bed reactors with copper foam packing

Enhanced Performance of Packed Bed Methane Dry Reformers Using Metal Foam Catalyst Pellets: A Particle Resolved CFD Study

An experimental investigation of gas-liquid-solid transfer and external wetting efficiency on open-cell foam in a three-phase packed bed reactor: validation and parameter estimation

An Efficient Method for Enhancing Adhesion and Uniformity of Al2O3 Coatings on Nickel Micro-Foam Used in Micropacked Beds

Preparation of Pd/γ-Al2O3/nickel foam monolithic catalyst and its performance for selective hydrogenation in a rotating packed bed reactor

Hydrodynamics and Droplet Size Distribution of Liquid–liquid Flow in a Packed Bed Reactor with Orifice Plates

Preparation of Nickel-Foam-supported Pd/NiO Monolithic Catalyst and Construction of Novel Electric Heating Reactor for Catalytic Combustion of VOCs

Performance analysis, statistical modeling, and multiple response optimization of a novel fixed-bed quartz reactor packed with Ba-Pt@γ-AL2O3 using response surface methodology