Abstract:The gas-solid vertical single helical ribbon agitated reactor is widely used in the polypropylene industry. The gas flow and mass transfer determine the heat transfer capacity and product quality. In this work, the pressure drop was measured below and above minimum fluidization velocity (umf). Then, the axial and radial dispersion coefficients (DL and DR) were estimated below umf by measuring the step residence time distribution and the stationary radial tracer profiles, respectively. Pressure analysis show the agitation significantly reduces the bed pressure drop, changing the fixed bed below umf and bubbling bed above umf to an agitated bed with a periodic voidage. The DL was proportional to the gas velocity, with little influences of the stirring speed. The radial tracer profiles show the bed is divided by the inner diameter of the helical ribbon into the peripheral ascending region and the central descending region, without gas exchange between them. Furthermore. the tracer profiles in the descending region are classified into two types. For type I, the DR, calculated by the plug flow model with radial dispersion, is proportional to the gas velocity, with little effects of stirring speed. Type II shows uniform profiles due to the deflection of the gas flow toward the low pressure area at the inner diameter of helical ribbon. The causes of the two types are explained by the relative size of particle circulation and gas flux. These two flow regimes are quantitatively clarified with an empirical correlation of Re and Fr as flow regime transition boundary, namely dispersed plug flow and perfect mixing flow. With lower Re and higher Fr, it changes from dispersed plug flow to perfect mixing flow.

Novel Packed Bed Reactor Designed for Prileschajew Epoxidation of Fatty Acid Methyl Ester: Intensification of Mass/heat Transfer

Modeling and Analysis of New Reactor Concepts for Poly(ethylene Terephthalate) Esterification Process

Deactivation Kinetic Study on Vapor Phase Beckmann Rearrangement of Cyclohexanone Oxime and Design of the Multi-Layer Inclined Channel Bionic Reactor

Hydrodynamics and Droplet Size Distribution of Liquid–liquid Flow in a Packed Bed Reactor with Orifice Plates

Heat Transfer Characteristics Analysis and Optimization of the Micro Packed Bed Bionic Reactor

Integration of CFD and Polymerization for an Industrial Scale Cis-Polybutadiene Reactor

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Novel Reactor for Exothermic Heterogeneous Reaction Systems: Intensification of Mass and Heat Transfer and Application to Vegetable Oil Epoxidation

Epoxidation of Fatty Acid Methyle Ester with hydrodynamic cavitation technology

Modeling of an Industrial Scale Hydrodynamic Cavitation Multiphase Reactor for Prileschajew Epoxidation

Numerical calculation of flow and reaction safety with different particle sizes in a fixed bed reactor for propene epoxidation with H 2 and O 2

Mass Transfer and Reaction Kinetics of Soybean Oil Epoxidation in a Formic Acid‐autocatalyzed Reaction System

Macroscopic Kinetics Modelling of Liquid–liquid Reaction System: Epoxidation of Fatty Acid Methyl Esters

Kinetics and reactor modelling of fatty acid epoxidation in the presence of heterogeneous catalyst

External Mass Transfer Performance Studies in a Micropacked Bed Reactor with Pd/PDA/Nickel Foam

Preparation and Characterization of a Novel Packing Material for the Gas-Phase Fluidized-Bed Bioreactor

Investigation of External Mass Transfer in a Micropacked Bed Reactor with a Pd/Al2O3/Nickel Foam

CFD-aided enhancement of propylene oxide decomposition in a tubular reactor with a corrugated cooling jacket

The Physicochemical Basis for the Production of Rapeseed Oil Fatty Acid Esters in a Plug Flow Reactor

Epoxidation of Tall Oil Fatty Acids and Tall Oil Fatty Acids Methyl Esters Using the SpinChem® Rotating Bed Reactor

Preparation of Epoxidized Fatty Acid Methyl Ester with in situ Auto-Catalyzed Generation of Performic Acid and the Influence of Impurities on Epoxidation