Abstract:The onboard fuel in an advanced aero engine can be used to cool the highly compressed hot air in a heat exchanger to restore the air's cooling capacity. In the process, the high fuel temperature leads to thermal oxidative reactions and surface coking. Large eddy simulations have been conducted in this paper to study the combined effects of buoyant and centrifugal forces on heat transfer and thermal oxidative coking of the aviation kerosene, RP-3, in vertical U-bend tubes at a supercritical pressure of 4 MPa. Numerical re-sults indicate that buoyancy exerts its impact on fluid flows and heat transfer mainly in vertical straight sections of the tube, promoting turbulence generation in the downward flow and suppressing turbulence in the upward flow. This causes differences of the heat transfer and surface coking rate in the up-down and down-up cases. Centrifugal force plays an important role in fluid flows and heat transfer in the U -bend section. Strong secondary flows driven by the centrifugal effect significantly enhance heat transfer in the outer region but weaken heat transfer in the inner region of the U-bend section, resulting in up to 300 K circumferential wall temperature difference in the present cases. The large wall temperature gradient and high wall temperature lead to significant thermal oxidative coking inside the tube near the entrance and in the inner region near the exit of the U-bend section. Results herein provide fundamen-tal understanding and have practical implication for the design and safe operation of an air-fuel heat exchanger in aerospace applications.(c) 2022 Elsevier Ltd. All rights reserved.

Novel Reactor for Exothermic Heterogeneous Reaction Systems: Intensification of Mass and Heat Transfer and Application to Vegetable Oil Epoxidation

Uncatalyzed Oxidation of Cyclohexane in the Microchannels

Numerical Study on Hydrodynamics, Mixing and Heat Transfer of Highly Viscous Fluid in a Novel Shell-and-tube Heat Exchanger with X-type Baffles

Macroscopic Kinetics Modelling of Liquid–liquid Reaction System: Epoxidation of Fatty Acid Methyl Esters

Epoxidation of Fatty Acid Methyle Ester with hydrodynamic cavitation technology

Novel Packed Bed Reactor Designed for Prileschajew Epoxidation of Fatty Acid Methyl Ester: Intensification of Mass/heat Transfer

Mass Transfer and Reaction Kinetics of Soybean Oil Epoxidation in a Formic Acid‐autocatalyzed Reaction System

Modeling of an Industrial Scale Hydrodynamic Cavitation Multiphase Reactor for Prileschajew Epoxidation

Enhancement of hydrodynamic cavitation in the esterification reaction of soybean oil deodorizer distillate

Intensification of Liquid-liquid Heterogeneous Micromixing for Preparing Biodiesel by Hydrodynamic Cavitation

Liquid–Liquid Equilibrium for Systems Containing Epoxidized Oils, Formic Acid, and Water: Experimental and Modeling

Complex Droplet Microreactor for Highly Efficient and Controllable Esterification and Cascade Reactions

Improving Selectivity of Temperature-Sensitive Exothermal Reactions with Microreactor

Liquid-phase oxidation of cyclohexane with air in a microreactor: Kinetics and process intensification

Large Eddy Simulations of Heat Transfer and Thermal Oxidative Coking of Aviation Kerosene in Vertical U-Tube at a Supercritical Pressure

Process intensification of H2O2 extraction using gas–liquid–liquid microdispersion system

Development and characterisation research on SnO 2 ‐Al 2 O 3 ‐NiO/SO 4 2− catalysed epoxidation of soybean oil under hydraulic cavitation

Application of ZrO2-ZSM-5 catalyzed soybean oil epoxidation enhanced by hydraulic cavitation

Process Intensification Of Catalytic Hydrogenation Of Ethylanthraquinone With Gas-Liquid Microdispersion

A novel membrane dispersion micro-extractor

Process intensification of reactive extraction for hydrogen peroxide production in a rotating packed bed reactor