Abstract:At present, the utilization of grease has attracted more and more attention. This article presents a simple method that efficiently cleaves methyl oleate‐derived methyl 9,10‐epoxystearate (a) to give high yields of methyl 9‐oxononanoate (d) with nonanal (c) as co‐product. A WO3/MCM‐41 catalyst is prepared via direct mixed‐gel synthesis. The catalyst is tested in the oxidative cleavage of a to produce d which can be used as a polymer precursor or an important feedstock. The effects of WO3 loading, temperature, time, H2O2/a molar ratio, catalyst/a weight ratio, and t‐BuOH/a weight ratio on the a conversion and d yield are examined using single‐factor experiments. The optimal reaction conditions are determined by orthogonal experiments. The optimal WO3 loading, temperature, time, H2O2/a molar ratio, catalyst/a weight ratio, and t‐BuOH/a weight ratio are 35%, 80 °C, 20 min, 1.3, 0.04, and 0.5, respectively. Under these conditions, the a conversion and d yield reach 99.4 and 78.4%, respectively. In addition, the catalyst shows no significant decrease in activity after being reused three times. Moreover, the reaction mechanism is studied based on the product distribution over time.Practical Applications: Few studies on methyl 9,10‐epoxystearate used as the raw material to give methyl 9‐oxononanoate and nonanal are found. Because the ethylene oxide bond is more unstable than the carbon–carbon double bond, the oxidative cleavage of methyl 9,10‐epoxystearate is easier than cleavage of methyl oleate that allows the oxidative cleavage to be done under milder conditions. Methyl 9‐oxononanoate can be converted to a monomer of high‐value polymers and is also an important feedstock in the production of chemicals. The co‐product nonanal is a natural spice which can be used in the fragrance industry. The results show that the reaction time is short and methyl 9‐oxononanoate yield is high under mild reaction conditions. The method in this study can also be widely used in other oxidative cleavage reactions of epoxides.Methyl 9,10‐epoxystearate is used as the raw material to produce methyl 9‐oxononanoate with nonanal as co‐product using WO3/MCM‐41 as catalyst and H2O2 as oxidant.

Development and characterisation research on SnO 2 ‐Al 2 O 3 ‐NiO/SO 4 2− catalysed epoxidation of soybean oil under hydraulic cavitation

Preparation of Sno2/Graphene Nanocomposite and Its Application to the Catalytic Epoxidation of Alkenes with H2o2

The Preparation of Graphene Oxide and Using It as Catalyst for the Hydrolyzation of Soybean Isoflavone

Application of ZrO2-ZSM-5 catalyzed soybean oil epoxidation enhanced by hydraulic cavitation

Enzymatic Epoxidation of High Oleic Soybean Oil

Epoxidation of Fatty Acid Methyle Ester with hydrodynamic cavitation technology

Efficient and Stable Cu-Ni/ZrO2 Catalysts for in Situ Hydrogenation and Deoxygenation of Oleic Acid into Heptadecane Using Methanol As a Hydrogen Donor

Mass Transfer and Reaction Kinetics of Soybean Oil Epoxidation in a Formic Acid‐autocatalyzed Reaction System

Dehydrative Decarbonylation of Fatty Acids into Long-Chain Olefins over CoNx/NC Catalysts

Bifunctional CuNi/CoOx catalyst for mild-temperature in situ hydrodeoxygenation of fatty acids to alkanes using isopropanol as hydrogen source

Enhancement of hydrodynamic cavitation in the esterification reaction of soybean oil deodorizer distillate

Highly efficient Co single-atom catalyst for epoxidation of plant oils

Oxidative Cleavage of Methyl 9,10‐epoxystearate over WO3/MCM‐41 for Methyl 9‐oxononanoate Production

Ultrasound-assisted chemoenzymatic epoxidation of soybean oil by using lipase as biocatalyst

Novel Reactor for Exothermic Heterogeneous Reaction Systems: Intensification of Mass and Heat Transfer and Application to Vegetable Oil Epoxidation

Preparation of Epoxidized Soybean Oil by Catalysis of Small Amount of Sulfuric Acid

Microwave-assisted carbon-based sulphonated melon seed peel catalyst development for the optimization of neem seed oil epoxidation using response surface methodology

Study on the Production Process of the System of Non Acid Catalytic Synthesis of Epoxy Soybean Oil

Sustainable Biocatalytic System for the Enzymatic Epoxidation of Waste Cooking Oil

Aerobic epoxidation of α-pinene using Mn/SAPO-34 catalyst: Optimization via Response Surface Methodology (RSM)

In Situ Epoxidation of Hybrid Oleic Acid Derived from Waste Palm Cooking Oil and Palm Oil with Applied ZSM-5 Zeolite as Catalyst