Abstract:The catalytic transformation of renewable fatty acids into value-added fatty alcohols without the use of gaseous hydrogen is a versatile technique for the utilization of microalgae and waste cooking oil, where Cu-based catalysts are considered to be the most suitable candidate. However, the interpretation of the structure–reactivity relationship caused by different crystal types of carriers and the metal–support interface is not well understood. Herein we synthesized ZrO2-supported Cu nanoparticle catalysts via different preparation methods and reduction temperatures under similarly exposed surface facets and Cu valency but different polymorphic phases of ZrO2 (monoclinic ZrO2: m-ZrO2; tetragonal ZrO2: t-ZrO2) and the metal–support interface. Interestingly, the as-synthesized Cu/t-ZrO2 catalysts showed remarkably better catalytic performance than Cu/m-ZrO2 for the in situ hydrogenation of lauric acid in the methanol–water system. Combined experimental and density functional theory (DFT) calculation results ascribed the lower efficiency of m-ZrO2 as a carrier to weakly adsorbed reactant and intermediate molecules as well as the absence of an oxygen vacancy in the crystal phase. The interface-rich Cu/t-ZrO2 catalysts displayed higher activity normalized to the surface-exposed Cu sites toward lauryl alcohol production than the interface-deficient counterparts. DFT calculation results further revealed that this metal–support interface plays an important role in promoting the C–O bond or H–H bond cleavage in two possible reaction routes, thus reducing the activation barrier of the overall reaction.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c02320?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c02320</a>.Additional details of catalyst synthesis, characterization, computational details, and catalytic performance for aqueous phase reforming of methanol (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c02320/suppl_file/cs0c02320_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Efficient and Stable Cu-Ni/ZrO2 Catalysts for in Situ Hydrogenation and Deoxygenation of Oleic Acid into Heptadecane Using Methanol As a Hydrogen Donor

In Situ Hydrogenation and Decarboxylation of Oleic Acid into Heptadecane over a Cu–Ni Alloy Catalyst Using Methanol As a Hydrogen Carrier

Bifunctional CuNi/CoOx catalyst for mild-temperature in situ hydrodeoxygenation of fatty acids to alkanes using isopropanol as hydrogen source

Catalytic in Situ Hydrogenation of Fatty Acids into Fatty Alcohols over Cu-Based Catalysts with Methanol in Hydrothermal Media

Highly Efficient Conversion of Oleic Acid to Heptadecane Without External Hydrogen Source over Atomic Layer Deposited Bimetallic NiPt Catalysts

CuZnCoOx Multifunctional Catalyst for in Situ Hydrogenation of 5-Hydroxymethylfurfural with Ethanol As Hydrogen Carrier

Catalytic Decarboxylation and Aromatization of Oleic Acid over Ni/AC Without an Added Hydrogen Donor

Catalytic Decarbonylation Of Stearic Acid To Hydrocarbons Over Activated Carbon-Supported Nickel

Highly Efficient N-Doped Carbon-Supported Subnanometer Cobalt–Zinc Bimetallic Catalysts for Decarbonylation of Fatty Acids into Long-Chain Olefins

CO2 Hydrogenation to Methanol over Cu/ZnO Catalysts Synthesized Via a Facile Solid-Phase Grinding Process Using Oxalic Acid

Catalytic Deoxygenation of C-18 Fatty Acid over Supported Metal Ni Catalysts Promoted by the Basic Sites of ZnAl2O4 Spinel Phase

In Situ Hydrogenation of Methyl Palmitate to Hexadecanol on TiO2- and ZrO2-Supported Ni-In Catalysts in the Aqueous Phase Using Methanol As a Hydrogen Donor

Effect of Zn/Al Ratio of Ni/Zno-Al2o3 Catalysts on the Catalytic Deoxygenation of Oleic Acid into Alkane

Efficient and Stable Ni-Cu Catalysts for Ex Situ Catalytic Pyrolysis Vapor Upgrading of Oleic Acid into Hydrocarbon: Effect of Catalyst Support, Process Parameters and Ni-to-Cu Mixed Ratio

Tuning electron density of metal nickel by support defects in Ni/ZrO2 for selective hydrogenation of fatty acids to alkanes and alcohols

Carbon-coated Ni-Co alloy catalysts: preparation and performance for in-situ aqueous phase hydrodeoxygenation of methyl palmitate to hydrocarbons using methanol as the hydrogen donor

Engineering a Ni 1 Fe 1 –ZnO Interface to Boost Selective Hydrogenation of Methyl Stearate to Octadecanol

Controlled Electron Transfer at the Ni-ZnO Interface for Ultra-Fast and Stable Hydrogenation of N-propylcarbazole

Deoxygenation of Octanoic Acid Catalyzed by Hollow Spherical Ni/ZrO2

Sodium Hydroxide–Sodium Oxalate-Assisted Co-Precipitation of Highly Active and Stable Cu/ZrO 2 Catalyst in the Partial Oxidation of Methanol to Hydrogen

Transfer Hydrogenation of Fatty Acids on Cu/ZrO 2 : Demystifying the Role of Carrier Structure and Metal–Support Interface