Abstract:<h2>Abstract</h2>Catalysts with tunable activity and selectivity to targeted products are highly demanded when using complex biomass-based resources for the production of fuels and chemicals. Here we synthesize a series of Ni/ZrO2 catalysts, denoted as iwi-Ni/m-ZrO2, pc-Ni/t-ZrO2 and pfc-Ni/t-ZrO2, prepared by incipient-wetness impregnation (iwi), positive co-precipitation (pc) and parallel flow co-precipitation (pfc) methods, respectively, with the purpose to tune the electron density of nickel in the Ni/ZrO2 catalysts for the selective hydrogenation of fatty acids to fuel-like alkanes or fatty alcohols. The structural and electronic properties of the catalysts are systematically investigated by N2 adsorption, XRD, H2-TPR, H2-TPD, HRTEM, XPS, In situ FTIR, and DFT calculations. The catalytic performance shows that monoclinic ZrO2 supported nickel catalysts (iwi-Ni/m-ZrO2) exhibit the highest selectivity to 1-octadecanol but the lowest selectivity to n-heptadecane, while tetragonal ZrO2 supported nickel catalysts (pc-Ni/t-ZrO2 and pfc-Ni/t-ZrO2), especially the latter possess the highest selectivity to n-heptadecane with the lowest selectivity to 1-octadecanol. This variation in the selectivity is found correlated with the oxygen deficiency of ZrO2 support which affects the electron density of supported Ni metals. Charge transfer from the support to metal occurs on all the three catalysts, which stems from the electrons trapped in the oxygen vacancies after removing the interfacial O atom in the process of reduction of the ZrO2 support. The negatively charged metal Ni promotes the heterolysis of hydrogen and the subsequent hydrogenation of adsorbed fatty acids to aldehyde intermediate. Ni metals of much higher excess electron density on m-ZrO2 (due to its higher reducibility) further catalyze the hydrogenation of the C=O bond of aldehyde to 1-octadecanol while Ni metals with approximate excess electron density on t-ZrO2 preferentially catalyze the cleavage of the C-CHO bond to produce n-heptadecane.

Catalytic Deoxygenation of C-18 Fatty Acid over Supported Metal Ni Catalysts Promoted by the Basic Sites of ZnAl2O4 Spinel Phase

Efficient and Stable Cu-Ni/ZrO2 Catalysts for in Situ Hydrogenation and Deoxygenation of Oleic Acid into Heptadecane Using Methanol As a Hydrogen Donor

Catalytic Decarbonylation Of Stearic Acid To Hydrocarbons Over Activated Carbon-Supported Nickel

Bifunctional CuNi/CoOx catalyst for mild-temperature in situ hydrodeoxygenation of fatty acids to alkanes using isopropanol as hydrogen source

Highly Efficient Conversion of Oleic Acid to Heptadecane Without External Hydrogen Source over Atomic Layer Deposited Bimetallic NiPt Catalysts

Catalytic Decarboxylation and Aromatization of Oleic Acid over Ni/AC Without an Added Hydrogen Donor

In Situ Hydrogenation and Decarboxylation of Oleic Acid into Heptadecane over a Cu–Ni Alloy Catalyst Using Methanol As a Hydrogen Carrier

Effect of Zn/Al Ratio of Ni/Zno-Al2o3 Catalysts on the Catalytic Deoxygenation of Oleic Acid into Alkane

Preparation of Metal-Acid Bifunctional Catalyst Ni/Zsm-22 for Palmitic Acid Catalytic Deoxygenation

Enhancement of fatty acids hydrodeoxygenation selectivity to diesel-range alkanes over the supported Ni-MoOx catalyst and elucidation of the active phase

Graphitic carbon embedded FeNi nanoparticles for efficient deoxygenation of stearic acid without using hydrogen and solvent

Tuning electron density of metal nickel by support defects in Ni/ZrO2 for selective hydrogenation of fatty acids to alkanes and alcohols

Efficient Deoxygenation of Methyl Esters to Hydrocarbons on Al2O3 Supported Ni-Sn Intermetallic Compounds

Hydrogenation of fatty acids to fatty alcohols over Ni 3 Fe nanoparticles anchored on TiO 2 crystal catalyst: Metal support interaction and mechanism investigation

Preparation of Reduced Ni-Nb-O Composite Hydrogenation Catalysts for Highly Selective Conversion of Free Fatty Acids to N-Alkanes

Highly Selective Hydrodecarbonylation of Oleic Acid into N‐heptadecane over a Supported Nickel/Zinc Oxide–Alumina Catalyst

Effective deoxygenation of fatty acids over Ni(OAc)2 in the absence of H2 and solvent

Carbon-coated Ni-Co alloy catalysts: preparation and performance for in-situ aqueous phase hydrodeoxygenation of methyl palmitate to hydrocarbons using methanol as the hydrogen donor

Engineering a Ni 1 Fe 1 –ZnO Interface to Boost Selective Hydrogenation of Methyl Stearate to Octadecanol

Highly selective and efficient hydrogenation of fatty acids to alcohols using NiMo@C catalyst

Fabrication of NiZn Bimetallic Oxides Catalysts Supported on Carbon Black Waste for Catalytic Pyrolysis of Fatty Acid