Abstract:In this work, the coupled model based on an iterative approach was developed to describe the flow behavior and catalytic hydrogenation of dimethyl oxalate (DMO) in a fluidized-bed reactor (FBR). First, a single-particle model (SPM) and a computational fluid dynamics (CFD) model were constructed, respectively. A set of hyperbola-like kinetics equations were included in the SPM. Subsequently, we assumed that all catalyst particles inside each small computational cell for the CFD model experience the same external conditions, which ensures the effective coupling of the two models above. The assumption and the coupled model have been validated by evaluating the above assumption and comparing with the experimental data, respectively. Based on the validated model, the predictions of the two classical diffusion equations (i.e., the Wilke-Bosanquet diffusion equation and the Fick or Wilke diffusion equation) are compared. In addition, the main flow field and reaction parameters in the FBR were investigated numerically. The results indicated that the intrapartice transfer resistance rises with the increase of the particle size, while it is not obvious for the selected studied system. The results also indicated that all of the species mass fraction distributions become more even as the catalyst size becomes smaller and the different diffusion models have little influence on simulation results. The simulated results here also demonstrated that one is capable of investigating reactor behavior at relatively low computational cost by using the proposed multiscale model.

Modeling of an Industrial Scale Hydrodynamic Cavitation Multiphase Reactor for Prileschajew Epoxidation

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

Epoxidation of Fatty Acid Methyle Ester with hydrodynamic cavitation technology

Macroscopic Kinetics Modelling of Liquid–liquid Reaction System: Epoxidation of Fatty Acid Methyl Esters

Novel Reactor for Exothermic Heterogeneous Reaction Systems: Intensification of Mass and Heat Transfer and Application to Vegetable Oil Epoxidation

Novel Packed Bed Reactor Designed for Prileschajew Epoxidation of Fatty Acid Methyl Ester: Intensification of Mass/heat Transfer

Microporous Inert Membrane Packed-Bed Reactor for Propylene Epoxidation with Hydrogen and Oxygen: Modelling and Simulation

Modeling of Reactive Gas–solid Flows in Riser Reactors Using a Multi-Scale Chemical Reaction Model

Modeling on Scale-Up of an Ebullated-Bed Reactor for the Hydroprocessing of Vacuum Residuum

Multiscale Computational Fluid Dynamics–Population Balance Model Coupled System of Atom Transfer Radical Suspension Polymerization in Stirred Tank Reactors

A Generalized CFD Model for Evaluating Catalytic Separation Process in Structured Porous Materials

Iterative Multiscale Computational Fluid Dynamics-Single-Particle Model For Intraparticle Transfer And Catalytic Hydrogenation Reaction Of Dimethyl Oxalate In A Fluidized-Bed Reactor

Development in modeling the macro-scale phenomena of fluidized bed reactor for polyolefin production

Model-Based Analysis for Ethylene Carbonate Hydrogenation Operation in Industrial-Type Tubular Reactors

Numerical Simulation of Hydrogen Production Via Chemical Looping Reforming in Interconnected Fluidized Bed Reactor

Experimental and Kinetic Model for Enhanced Liquid-Phase Hydrogenation of O-Cresol in a Distributor-Type Multichannel Ceramic Membrane Reactor

A New Lumped Kinetic Model of an Industrial Hydrocracking Process

Kinetics and reactor modelling of fatty acid epoxidation in the presence of heterogeneous catalyst

Numerical Simulation of Axial Flow and Catalytic Pyrolysis Process of Heary Oil in a Riser Reactor

A Rigorous Model for Hydrogen Response in Industrial Propylene Polymerization Loop Reactors: from Micro-Mechanism to Macro-Behavior

Trans-level multi-scale simulation of porous catalytic systems: Bridging reaction kinetics and reactor performance