Abstract:Biomass fast pyrolysis fluidized bed reactor is regarded as one of the most promising technologies for high value utilization of biomass. In this work, one two-dimensional fluidized bed reactor model was established, coupling with multiphase CFD simulation method and pyrolysis reaction kinetics, and further verified by the experimental data. This work mainly investigated the effects of biomass inlet and nitrogen inlet modes on multi-process characteristics, such as flow behavior, heat transfer and pyrolysis reaction. The synergistic effects between the two inlet modes were further explored and thus would affect the three-phase pyrolysis product distribution. The results showed that the spatial particle distribution and temperature distribution in the dense phase zone were becoming more uniform and the tar yield increased when the biomass inlet mode changed from single nozzle to double nozzles jetting opposite. Besides, when the nitrogen nozzle number was set as one and the auxiliary gas velocity was set as 0.15 m/s, much larger local circulation formed in the dense phase zone, meanwhile the particle volume fraction and temperature became more evenly distributed, which was conducive to the biomass pyrolysis process. The nitrogen inlet mode was found to show a greater impact on the tar yield compared to the biomass inlet mode. For single gas inlet mode, one biomass nozzle should be preferred for lower auxiliary gas velocity and the opposite double nozzle would be better for higher auxiliary gas velocity. The synergistic effects between biomass and nitrogen inlet modes were further summarized, which were found to have a positive impact on the biomass pyrolysis reaction characteristics. Based on the above conclusions, this work could provide a feasible theoretical guidance for designing fluidized bed pyrolysis reactor and optimizing the biomass pyrolysis process.

Multiscale Modeling of Plastic Pyrolysis with a Neural Network-Inspired Pyrolysis Kinetic Model and Coarse-Grained DEM-CFD

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Review of Modelling of Pyrolysis Processes with CFD-DEM

Impact of the Reactor Structure on Biomass Pyrolysis in Fluidized-Bed Reactors: A Coarse-Grained CFD-DEM Study

Simulating Polyethylene Pyrolysis from a Generalized Molecular-Level Kinetic Model

Prediction of High-Density Polyethylene Pyrolysis Using Kinetic Parameters Based on Thermogravimetric and Artificial Neural Networks

Numerical Simulation and Multi-Process Coupling Analysis for Biomass Pyrolysis Fluidized Bed Reactor Based on Synergistic Effects Between Biomass and Nitrogen Inlet Modes

A Simplified and Effective Molecular-Level Kinetic Model for Plastic Pyrolysis

A Molecular-Level Kinetic Model for the Primary and Secondary Reactions of Polypropylene Pyrolysis

CFD-DEM Simulation of Biomass Pyrolysis in Fluidized-Bed Reactor with a Multistep Kinetic Scheme

Investigation and prediction of co-pyrolysis between oily sludge and high-density polyethylene via in-situ DRIFTS, TGA, and artificial neural network

A Multidimensional Numeric Study on Smoldering-Driven Pyrolysis of Waste Polypropylene

Multiscale CFD Modeling of High-Temperature Biomass Pyrolysis with an Intraparticle Particle Model and Detailed Pyrolysis Kinetics

Computational Fluid Dynamics Simulation of Gas–liquid–solid Polyethylene Fluidized Bed Reactors Incorporating with a Dynamic Polymerization Kinetic Model

A sequential lumped kinetic modelling approach for the co-pyrolysis of plastic mixtures with a heavy refinery intermediate product in a tubular reactor

Monte Carlo modeling of particle agglomeration during polymer pyrolysis in bubbling fluidized bed

A Robust Two-Dimensional Model for the Pyrolysis of Plastic Waste Driven by Self-Sustaining Smoldering

An Investigation towards Coupling Molecular Dynamics with Computational Fluid Dynamics for Modelling Polymer Pyrolysis

Comprehensive DEM-CFD model and thermal uniformity optimization for biomass catalytic pyrolysis reactor