Abstract:Rotary kilns are widely used in industry to perform several different operations. When numerically modeling such systems, a common simplification is to neglect the residence time distribution of particles. The present study numerically investigates the influence of particle residence time distribution on the pyrolysis of biomass in a co-current heated rotary kiln. First, the model (balance equations, reaction scheme, flow model, and heat transfer mechanisms) is developed. The applied particle flow model (Seaman's model) is then validated by comparing the calculated mean residence time τand bed height to the results of a discrete element method (DEM) simulation of an example case. The mean residence time (τ = 552 s) and the bed height (H(z = 0) = 52 mm) of the Seaman's model was found to be in good agreement with the results of the DEM simulation (τ = 542 s, H(z = 0) = 50 mm).A detailed discussion of the residence time distribution's influence on the simulated conversion for the example case is then presented. We performed 54 simulations with various Péclet numbers between 1 and 100 and showed that the product yield significantly changes for Péclet numbers below 10, that is, neglecting residence time distribution (RTD) may not be a true assumption in all operating conditions.Finally, performing a comprehensive parameter study, the RTD's influence under various operating conditions and kiln designs is investigated. The varied parameters are the kiln diameter (D = 0.1 - 1 m) the ratio of particle to kiln diameter (d/D = 5 × 10−3 - 40 × 10−3), the ratio of kiln length to kiln diameter (L/D = 1 - 10), the kiln's inclination angle (β = 0.1 - 8 ∘), the Froude number (Fr = 10−3 - 10−2), the rotational Reynolds number (Re = 102 - 16 ×10 3), and the Péclet number (Pe = 5 - 100). Using more than 13000 simulations, we show that in one third of the investigated cases the change of product yield is higher than 2 % when changing from plug flow behavior to high axial dispersion (Pe = 5). For cases where the influence of the RTD on the final product yield is small, conditions along the kiln might still change significantly. The biggest change of the product yield from plug flow behavior to high axial dispersion was found to be 5.5 wt-% for the following conditions: D = 1 m, d/D =5 × 10−3, L/D = 1, β = 0.1, Fr = 10−2 and Reω = 16000.

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Multi-level Coarse-Grained Discrete Element Method Modeling of Cylinder Particle Flow in a Rotating Drum

Impact of the Reactor Structure on Biomass Pyrolysis in Fluidized-Bed Reactors: A Coarse-Grained CFD-DEM Study

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Comprehensive DEM-CFD model and thermal uniformity optimization for biomass catalytic pyrolysis reactor

CFD-DEM Simulation of Biomass Pyrolysis in Fluidized-Bed Reactor with a Multistep Kinetic Scheme

Multiscale Modeling of Plastic Pyrolysis with a Neural Network-Inspired Pyrolysis Kinetic Model and Coarse-Grained DEM-CFD

Numerical Simulation of the Entrained Flow Hydropyrolysis of Coal in Magnetically Rotating Plasma Reactor

Studying on the Upper Limit of the Coarse-Grained DEM Model for Simulating Mixing Processes in a Rolling Drum with Complex Wall Boundary

Computational Fluid Dynamics/Discrete Element Method Investigation on the Biomass Fast Pyrolysis: the Influences of Shrinkage Patterns and Operating Parameters

New Pyrolysis Model for Biomass Particles in a Thermally Thick Regime

Numerical Simulation and Multi-Process Coupling Analysis for Biomass Pyrolysis Fluidized Bed Reactor Based on Synergistic Effects Between Biomass and Nitrogen Inlet Modes

Impact of particle-scale models on CFD-DEM simulations of biomass pyrolysis

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Influence of particle residence time distribution on the biomass pyrolysis in a rotary kiln

DEM simulation of biomass pyrolysis in a novel interconnected screw reactor

Simulation of Biomass Pyrolysis in a Fluidized Bed Reactor Using Thermally Thick Treatment

CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor

Experimental and simulated study on fluidization characteristics of particle shrinkage in a multi-chamber fluidized bed for biomass fast pyrolysis

Multi-level coarse-grained DEM modelling of cylinder particle flow in a rotating drum

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method