Abstract:Abstract Plastics pyrolysis is based on thermal and sometimes catalytic breakdown of the polymer structure. The target product may be monomer (from PMMA, PTFE, PS), oil fractions ranging from petrol (C 5 ‐C 10 ) and kerosene (C 10 ‐C 15 ) to waxy fractions (≥C 20 ), aromatics, synthesis raw materials formed by hydrogenation or synthesis gas (H 2 , CO). The desired product determines the operating conditions required and hence the technology used. A survey is given of laboratory, pilot and industrial scale reactors, pyrolytic extruders, stirred tanks and single‐ or double‐bed fluidized systems. Moreover, the use of plastics in oil refinery‐based processes, such as fluid catalytic cracking, hydrocracking, viscosity breaking and delayed coking, and also (coal‐derived) hydrogenation and gasification are briefly covered. The product distribution in a pyrolysis process has to be derived experimentally, with the operating temperature, heating rate, catalytic effects, residence time of feed material and reaction products, reaction pressure, possible supply of reactive gases (such as oxygen, hydrogen) and, of course, the chemical constitution and structure of the original plastics as major factors. Pyrolysis involves the breaking of chemical bonds and is normally endothermic. The required heat of reaction can be supplied indirectly through the reactor walls, by a circulating heat carrier, which may be the polymer content of the reactor or the sand in a dual fluid‐bed system, or by partial oxidation. The reactor technology is generally determined by the temperature level required, heating method, necessary residence time and possibly the presence of a catalyst, required to rearrange linear structures to high‐octane‐number branched ones, to eliminate heteroatoms (Cl, N, O, S), etc. Some potential operating problems are addressed in an EU‐funded project with acronym Cycleplast, a joint project of five teams from Central and Western Europe, the aims of which are briefly described.

A sequential lumped kinetic modelling approach for the co-pyrolysis of plastic mixtures with a heavy refinery intermediate product in a tubular reactor

Eight Lumps Kinetic Model for Residual Oil Catalytic Cracking

Multiscale Modeling of Plastic Pyrolysis with a Neural Network-Inspired Pyrolysis Kinetic Model and Coarse-Grained DEM-CFD

Lumped Kinetics Model and Its On-Line Application to Commercial Catalytic Naphtha Reforming Process

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Kinetic Modeling with Automatic Reaction Network Generator, an Application to Naphtha Steam Cracking

A Study of Parallel and Competitive Reaction Schemes in Kinetic Modeling of Plastic Pyrolysis

Simulating Polyethylene Pyrolysis from a Generalized Molecular-Level Kinetic Model

A Simplified and Effective Molecular-Level Kinetic Model for Plastic Pyrolysis

Cracking of plastic pyrolysis oil over FCC equilibrium catalysts to produce fuels: Kinetic modeling

Molecular-level kinetic modelling for the pyrolysis of high-density polyethylene in a two-stage process

Lumping Strategy in Kinetic Modeling of Vacuum Pyrolysis of Plant Oil Asphalt

Kinetic Parameter Estimation for Linear Low-Density Polyethylene Gas-Phase Process from Molecular Weight Distribution and Short-Chain Branching Distribution Measurements

Technical methods in plastics pyrolysis

Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods

Kinetic Modelling of a Pyrolysis – Gasification Reactor

A Molecular-Level Kinetic Model for the Primary and Secondary Reactions of Polypropylene Pyrolysis

A New Lumped Kinetic Model of an Industrial Hydrocracking Process

A molecular kinetic model for heavy gas oil catalytic pyrolysis to light olefins

Pyrolysis of Mixed Plastic Waste: I. Kinetic Study

Response Surface Methodology Analysis of Pyrolysis Reaction Rate Constants for Predicting Efficient Conversion of Bulk Plastic Waste into Oil and Gaseous Fuels