Abstract:The gas-solid vertical single helical ribbon agitated reactor is widely used in the polypropylene industry. The gas flow and mass transfer determine the heat transfer capacity and product quality. In this work, the pressure drop was measured below and above minimum fluidization velocity (umf). Then, the axial and radial dispersion coefficients (DL and DR) were estimated below umf by measuring the step residence time distribution and the stationary radial tracer profiles, respectively. Pressure analysis show the agitation significantly reduces the bed pressure drop, changing the fixed bed below umf and bubbling bed above umf to an agitated bed with a periodic voidage. The DL was proportional to the gas velocity, with little influences of the stirring speed. The radial tracer profiles show the bed is divided by the inner diameter of the helical ribbon into the peripheral ascending region and the central descending region, without gas exchange between them. Furthermore. the tracer profiles in the descending region are classified into two types. For type I, the DR, calculated by the plug flow model with radial dispersion, is proportional to the gas velocity, with little effects of stirring speed. Type II shows uniform profiles due to the deflection of the gas flow toward the low pressure area at the inner diameter of helical ribbon. The causes of the two types are explained by the relative size of particle circulation and gas flux. These two flow regimes are quantitatively clarified with an empirical correlation of Re and Fr as flow regime transition boundary, namely dispersed plug flow and perfect mixing flow. With lower Re and higher Fr, it changes from dispersed plug flow to perfect mixing flow.

Development in modeling the macro-scale phenomena of fluidized bed reactor for polyolefin production

Integration of CFD and Polymerization for an Industrial Scale Cis-Polybutadiene Reactor

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

Modeling and Analysis of New Reactor Concepts for Poly(ethylene Terephthalate) Esterification Process

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

CFD Modeling of Styrene Polymerization in a CSTR

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Important Mesoscale Phenomena in Gas Phase Fluidized Bed Ethylene Polymerization

Stability Analysis Of Ethylene Polymerization In A Liquid-Containing Gas-Solid Fluidized Bed Reactor

Multiscale Modeling of Plastic Pyrolysis with a Neural Network-Inspired Pyrolysis Kinetic Model and Coarse-Grained DEM-CFD

Effect of Temperature Switching and Dynamic Phase Equilibrium on Polymer Microstructure in Condensed-Mode Operation

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Stability and dynamic behaviors of gas-phase ethylene polymerization process under condensed mode operation

Thermal stability analysis of ethylene polymerization fluidized bed reactors under condensed mode operation through a TPM-PBM integrated model

Methodology for designing solution polymerization reactors based on multiscale model construction and simulation

Macroscopic Kinetics Modelling of Liquid–liquid Reaction System: Epoxidation of Fatty Acid Methyl Esters

Modeling of an Industrial Scale Hydrodynamic Cavitation Multiphase Reactor for Prileschajew Epoxidation

Simulation of Temperature Distribution in a Fluidized Bed Reactor for Ethylene Polymerization

Simulation of an industrial continuous bulk styrene polymerization process

Operational Optimization of Polymerization Reactors with Computational Fluid Dynamics and Embedded Molecular Weight Distribution Using the Iterative Surrogate Model Method