Abstract:Open-cell foams are potential materials for increasing mass transfer in packed-beds due to their large porosity, tortuosity, and great surface area. A novel purpose of mass transfer intensification in open-cell materials is developed in a Three-Phase Fixed Bed (TPFB) reactor. TPFB reactors filled with Open-Cell Foam Particles (OFPs) represent an important breakthrough in industrial applications. The use of OFPs beds receives more and more scientific and industrial interest as a catalyst support. In this context, the objective of this work is to describe an experimental and theoretical approach for the Residence Time Distribution (RTD) of CO2 tracer in a TPFB reactor on an OFPs bed. An investigation of a three-phase model shows that different gas and liquid flow rates in the TPFB reactor on the OFPs bed enhance the hydrodynamic characteristics and, therefore, improve the gas–liquid and liquid–solid mass coefficients due to the high external surface area of OFPs. The nonlinear Levenberg–Marquardt method was used to estimate the chosen physical parameters of the developed mathematical model. The RTD curves of the experimental data were adjusted to the proposed mathematical model by applying the nonlinear regression method to optimize the chosen physical parameters. As results, the gas–liquid and liquid–solid mass transfer coefficients on the OFPs bed are directly proportional to the gas and liquid flow rates, i.e., as the gas and liquid flow rates are decreased, gas–liquid and liquid–solid mass transfer coefficients are also reduced. On the other hand, the external wetting efficiency is inversely proportional, i.e., as gas and liquid flow rates are reduced, the external wetting efficiency is increased.

Hydrodynamics and Droplet Size Distribution of Liquid–liquid Flow in a Packed Bed Reactor with Orifice Plates

Novel Packed Bed Reactor Designed for Prileschajew Epoxidation of Fatty Acid Methyl Ester: Intensification of Mass/heat Transfer

Flow Distribution in a Novel Fixed Bed Bionic Reactor

CFD-PBM Investigation on Droplet Size Distribution in a Liquid–Liquid Stirred Tank: Effect of Impeller Type

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Hydrodynamics and mass transfer of gas–liquid flow in micropacked bed reactors with metal foam packing

Impact of the Channel- to Particle-Diameter Ratio on the Liquid-Liquid Mass Transfer and Pressure Drop in Micro Packed Bed Reactors

Investigation of Effective Interfacial Area in Micropacked Bed Reactors

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Liquid holdup of gas–liquid two‐phase flow in micro‐packed beds reactors

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Hydrodynamics and liquid–solid mass transfer in micropacked bed reactors with copper foam packing

Nature and Characteristics of Gas–liquid Flow Regimes in a Micro‐packed Bed Reactor

Liquid-solid mass transfer in a rotating packed bed reactor with structured foam packing

External Mass Transfer Performance Studies in a Micropacked Bed Reactor with Pd/PDA/Nickel Foam

Numerical calculation of flow and reaction safety with different particle sizes in a fixed bed reactor for propene epoxidation with H 2 and O 2

Bubble Dynamics and Mass Transfer Characteristics from an Immersed Orifice Plate

A Cfd Simulation Study to Evaluate the Flow and Catalytic Hydrogenation of Dimethyl Oxalate in A Packed Bed, A Two-Stage Fluidized Bed, and A Circulating Fluidized Bed

A General Pressure Drop Model Based on Liquid Holdup of Gas-Liquid Flow in Micro-Packed Beds

Local and global gas-liquid mass transfer in a micro-packed bed reactor utilizing a noninvasive colorimetric technique

An experimental investigation of gas-liquid-solid transfer and external wetting efficiency on open-cell foam in a three-phase packed bed reactor: validation and parameter estimation