Abstract:The porous foam material has been attracted to be used as the catalyst coating substrate for microreactors due to its generally excellent heat and mass transfer characteristics. Preparing uniform catalyst coating onto porous foam can increase the adhesion area between the coating and substrate to reduce spallation and extend the service life of microreactors. Herein, we developed a highly automatic centrifugal coating device to fabricate relatively uniform catalyst coating onto porous foam structures. The structural and hardware components of the automatic centrifugal coating device are introduced, and an active disturbance rejection control (ADRC) algo-rithm is adopted to accurately adjust the centrifugal speed with an error of <1 % to ensure the relative uni-formity of catalyst coating. By using the developed device, the CuZnZr/gamma-Al2O3 catalyst coating can be successfully loaded onto three types of foam substrates (Cu, alpha-SiC/alpha-Al2O3, alpha-Al2O3) with high relative unifor-mity. The spallation resistance was examined by thermal shock and high-speed steam scouring tests. After that, the porous foam substrate with coated catalyst was used in microreactors for methanol steam reforming, results showed that the conversion rate of CuZnZr/gamma-Al2O3/Cu foam structured catalyst can reach 90.7 % and hydrogen flow rate is 296.18 mL/min at 300 C. This study demonstrates our developed centrifugal coating device has the potential for industrial application of structured catalyst preparation.

Investigation of Hydrogenation and Mass Transfer Performance in Micropacked Beds with Highly Active Monolithic Catalysts

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Fabrication of wall-flow honeycomb micro packed bed and application in pressure swing adsorption process

Preparation of Pd/Al2O3/Nickel Microfoam Catalysts by Electrodeposition for Hydrogenation in a Micropacked Bed Reactor

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Nickel Nanoparticles Embedded in Porous Carbon-Coated Honeycomb Ceramics: A Potential Monolithic Catalyst for Continuous Hydrogenation Reaction

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

External Mass Transfer Performance Studies in a Micropacked Bed Reactor with Pd/PDA/Nickel Foam

Investigation of External Mass Transfer in a Micropacked Bed Reactor with a Pd/Al2O3/Nickel Foam

Preparation of Highly Effective Ni Foam Monolithic Catalysts by Electrolytic Deposition for Nitrobenzene Hydrogenation in a Micropacked Bed

Development of Centrifugal Coating Device to Load CuZnZr/γ-Al2O3 Catalyst on Porous Substrates for Methanol Steam Reforming

Electrodeposition of Activated Carbon on Ni Foam for Monolithic Catalysts and Intensification of Hydrogenation Performance in a Micropacked Bed

Preparation of Pd/γ-Al2O3/nickel foam monolithic catalyst and its performance for selective hydrogenation in a rotating packed bed reactor

Investigation of External Mass Transfer in Micropacked Bed Reactors

An Efficient Method for Enhancing Adhesion and Uniformity of Al2O3 Coatings on Nickel Micro-Foam Used in Micropacked Beds

Development of a centrifugal coating method to load catalyst washcoat onto porous substrates with high uniformity and adhesive strength

Preparation of Nickel-Foam-supported Pd/NiO Monolithic Catalyst and Construction of Novel Electric Heating Reactor for Catalytic Combustion of VOCs

In‐situ Construction of Graphite‐Supported Magnetic Carbocatalysts from a Metallo‐Supramolecular Polymer: High Performance for Catalytic Transfer Hydrogenation

Study on High-Performance Unsupported Ni–Mo–W Hydrotreating Catalyst

Role of catalyst shape and reactor performance for relating the catalytic activity and the chemical structure of active sites for emission control catalysis

Probing Low-Temperature OCM Performance over a Dual-Domain Catalyst Bed