Role of catalyst shape and reactor performance for relating the catalytic activity and the chemical structure of active sites for emission control catalysis

Jan-Dierk Grunwaldt,Samuel Struzek,Tim Delrieux,Florian Maurer,Danielle Santos Goncalves,Sarina-Lena Heck,Linda Klag,Joachim Czechowsky,Anna Zimina

DOI: https://doi.org/10.26434/chemrxiv-2024-wngm2

2024-05-28

Abstract:Packed powder beds and coatings are two relevant forms of catalysts, applied in industrial heterogeneous catalysis. Both types have their individual advantages and disadvantages in regard to the performance and characterisation causing some complexity in the resulting flow patterns, possible temperature inhomogenities in the reactor and the dynamic evolution of chemical state of the noble metal during the reaction along the catalytic bed. The well-known CO oxidation reaction over Pt/Al2O3 catalysts was used in this study to uncover the influence of the gas phase compositions, the influence of the temperature and the evolution of the electronic structure of Pt for powdered and coated catalysts at comparable length scales. Advanced operando investigations were used to demonstrate the influence of spatial gradients in the gas phase for washcoatings in contrast to packed powder beds. Additionally, transient gradients in the chemical state of Pt, which occurred more pronounced for packed powder beds than for coated monoliths were followed and traced back to heat and mass transfer effects. Finally, the catalytic activity can be linked to the temperature distributions for both types of samples. These findings will be valuable for planning and evaluating future combinations of spectroscopic and catalytic experiments on industrially relevant systems.

Chemistry

What problem does this paper attempt to address?

### What problems does this paper attempt to solve?

This paper aims to explore the relationship between catalyst shape and reactor performance on the catalytic activity and the chemical structure of active sites, especially in the application of emission - control catalysis. Specifically, the researchers focus on the following issues:

1. **Influence of catalyst shape**:
- The different performances of powder - bed catalysts and coated catalysts in industrial heterogeneous catalysis were studied.
- The differences between these two catalyst forms in terms of flow patterns, reactor temperature inhomogeneity, and the dynamic evolution of the electronic structure of precious metals during the reaction process were explored.

2. **Influence of gas composition and temperature**:
- The influence of gas composition and temperature on catalyst activity was studied, especially for the performance of Pt/Al₂O₃ catalysts in the CO oxidation reaction.
- The changes in the electronic structure of Pt at different temperatures were analyzed to understand its influence on catalytic activity.

3. **Influence of spatial gradients**:
- Using advanced in - situ (operando) research methods, the influence of spatial gradients on the gas phase in wash - coated catalysts was demonstrated, compared with the case of packed powder - bed catalysts.
- The transient gradients of the Pt chemical state were studied. These gradients are more significant in the packed powder - bed than in the coated monolith and are traced back to heat and mass transfer effects.

4. **Relationship between temperature distribution and catalytic activity**:
- The catalytic activity was related to the temperature distribution of the two samples, revealing the important influence of temperature on catalytic activity.

### Main research content

To achieve the above goals, the researchers carried out the following tasks:

- **Experimental design**: The CO oxidation reaction was used as a model reaction, and the Pt/Al₂O₃ catalyst was selected. Three different forms of catalysts were prepared: honeycomb - like thin - coating, chip - thick - coating, and packed powder - bed.

- **Characterization methods**: Multiple characterization techniques were employed, including X - ray absorption spectroscopy (XAS), infrared thermal imaging (IRT), gas - phase analysis, etc., to study in detail the chemical state and reaction behavior of the catalysts.

- **Result analysis**: By comparing the catalytic activities of different catalyst forms, the influence of internal and external mass - transfer limitations on the reaction rate was studied, and the roles of temperature gradients and chemical - state gradients were explored.

### Conclusion

This study reveals the multi - dimensional influence of catalyst shape on catalytic performance, including pressure - drop formation, complex flow patterns, temperature gradients, etc. The research results will be helpful for planning and evaluating the combination of spectroscopy and catalytic experiments in future industrial - related systems, thereby improving catalytic efficiency and stability.

### Formula representation

Some formulas and parameters involved in the paper are represented in Markdown format as follows:

- **Weight hourly space velocity (WHSV)**:
\[
\text{WHSV}=\frac{\text{Total gas flow}}{\text{Mass of platinum}}
\]
For example, for the packed powder - bed catalyst, the WHSV is \(3.8\times 10^{3}\, \text{l/h·g}\).

- **Reynolds number**:
\[
Re = \frac{\rho v D}{\mu}
\]
where \(\rho\) is the gas density, \(v\) is the gas velocity, \(D\) is the characteristic length (such as pipe diameter), and \(\mu\) is the gas viscosity.

- **Conversion rate**:
\[
\text{Conversion rate}=\frac{\text{Amount of CO reacted}}{\text{Initial amount of CO}}
\]

The accurate expression of these formulas and parameters is helpful for better understanding and interpretation of the experimental results.