A Scalable and Performant Grid Monitoring Framework

B. Volckaert,P. Thysebaert,M. D. Leenheer,F. Turck,B. Dhoedt,P. Demeester

Abstract:

What problem does this paper attempt to address?

Strong Local Coordination Structure Effects on Subnanometer PtOx Clusters over CeO2 Nanowires Probed by Low-Temperature CO Oxidation

Jun Ke,Wei Zhu,Yingying Jiang,Rui Si,Yan-Jie Wang,Shuai-Chen Li,Chuanhong Jin,Haichao Liu,Wei-Guo Song,Chun-Hua Yan,Ya-Wen Zhang

DOI: https://doi.org/10.1021/acscatal.5b00832

IF: 12.9

2015-01-01

ACS Catalysis

Abstract:A fundamental understanding of the structural effects of supported metal catalysts at the molecular level is extremely important for developing high-performance catalysts that are widely used in industry, which is still a longstanding attractive but challenging topic in multidisciplinary fields. In this work, we report the strong effects of local coordination structures on the catalytic activity of subnanometric PtOx clusters over CeO2 nanowires in low-temperature CO oxidation as a probe reaction. Atoms and subnanometric clusters of Pt were deposited to form the coordination structure of PtOx on the well-defined CeO2 nanowires with mainly exposed (110) facets. The reactivity of active sites and the variation of the local coordination structures of the PtOx sites were deeply investigated with in situ spectroscopic experiments, assisted by density functional theory simulations. According to our observation, although the highly dispersed Pt sites at the subnanometric scale could provide increased accessible sites, some of the Pt sites did not show high activity for CO oxidation due to the increased surrounding oxygen that seemed to overstabilize the Pt atoms. An increased proportion of both adsorbed CO intermediates on oxidized Pt sites and the interfacial lattice oxygen of PtOx clusters tended to become inactive on samples with a high coordination number of oxygen bonded to Pt sites (CN(Pt-O)), leading to the loss of effective active sites and a decrease in the catalytic activity. A relatively small CN(Pt-O) value in the subnanometric PtOx/CeO2 NWs, which was found to be the appropriate structure for their catalytic performance, remarkably increased the activity by about 1/2 order of magnitude. We believe our investigation on the interfacial coordination structure effects of subnanometric PtOx clusters dispersed on CeO2 nanowires can provide some new basic chemical insights into the metal-support interfacial interactions of Pt/CeO2 catalysts for understanding their catalytic performance in some relevant reactions.
Structural changes in noble metal nanoparticles during CO oxidation and their impact on catalyst activity

See Wee Chee,Juan Manuel Arce-Ramos,Wenqing Li,Alexander Genest,Utkur Mirsaidov

DOI: https://doi.org/10.1038/s41467-020-16027-9

IF: 16.6

2020-05-01

Nature Communications

Abstract:Abstract The dynamical structure of a catalyst determines the availability of active sites on its surface. However, how nanoparticle (NP) catalysts re-structure under reaction conditions and how these changes associate with catalytic activity remains poorly understood. Using operando transmission electron microscopy, we show that Pd NPs exhibit reversible structural and activity changes during heating and cooling in mixed gas environments containing O 2 and CO. Below 400 °C, the NPs form flat low index facets and are inactive towards CO oxidation. Above 400 °C, the NPs become rounder, and conversion of CO to CO 2 increases significantly. This behavior reverses when the temperature is later reduced. Pt and Rh NPs under similar conditions do not exhibit such reversible transformations. We propose that adsorbed CO molecules suppress the activity of Pd NPs at lower temperatures by stabilizing low index facets and reducing the number of active sites. This hypothesis is supported by thermodynamic calculations.

multidisciplinary sciences
Identification of Active Sites in Pt–Co Bimetallic Catalysts for CO Oxidation

Ya Pan,Liuxin Xu,Li Huang,Wenxue He,Hongmei Li,Siyu Wang,Zhixin Long,Zhihu Sun

DOI: https://doi.org/10.1021/acsaem.1c02049

IF: 6.4

2021-01-01

ACS Applied Energy Materials

Abstract:Identifying the active sites of catalysts under working conditions is crucial for precise understanding of reaction mechanisms and rational design of catalysts. However, the nature of active sites of bimetallic catalysts for CO oxidation is still a subject of debate. Herein, we employ in situ X-ray absorption and infrared spectroscopy to monitor the realistic structures of active centers in a bimetallic Pt-Co/Al2O3 catalyst during CO oxidation. This catalyst brings 100% CO conversion at room temperature and 30-fold higher turnover frequency than monometallic Pt/Al2O3 catalysts. The in situ studies reveal that under the CO oxidation condition, a fraction of Co atoms are segregated from the PtCo alloy into the surface CoO species that decorates the remaining PtCo nanoparticles through direct Pt-O-Co interfacial bonds. The bond-valence analysis unravels one dangling Co-O coordination per Co2+ in the surface CoO, which acts as the active sites for O-2 activation. The synergy between the CoO species and the PtCo alloy brings the superior catalytic activity. We also show that the directly connected Pt-O-Co interface is more beneficial to the catalytic performance than the unconnected Pt-CoO interface and provides a promising strategy toward the design of advanced catalysts for the redox reaction.
Atomic Structure Evolution of Pt–Co Binary Catalysts: Single Metal Sites versus Intermetallic Nanocrystals

Xing Li,Yanghua He,Shaobo Cheng,Boyang Li,Yachao Zeng,Zhenhua Xie,Qingping Meng,Lu Ma,Kim Kisslinger,Xiao Tong,Sooyeon Hwang,Siyu Yao,Chenzhao Li,Zhi Qiao,Chongxin Shan,Yimei Zhu,Jian Xie,Guofeng Wang,Gang Wu,Dong Su

DOI: https://doi.org/10.1002/adma.202106371

IF: 29.4

2021-10-04

Advanced Materials

Abstract:Due to their exceptional catalytic properties for the oxygen reduction reaction (ORR) and other crucial electrochemical reactions, PtCo intermetallic nanoparticle (NP) and single atomic (SA) Pt metal site catalysts have received considerable attention. However, their formation mechanisms at the atomic level during high-temperature annealing processes remain elusive. Here, the thermally driven structure evolution of Pt–Co binary catalyst systems is investigated using advanced in situ electron microscopy, including PtCo intermetallic alloys and single Pt/Co metal sites. The pre-doping of CoN4 sites in carbon supports and the initial Pt NP sizes play essential roles in forming either Pt3Co intermetallics or single Pt/Co metal sites. Importantly, the initial Pt NP loadings against the carbon support are critical to whether alloying to L12-ordered Pt3Co NPs or atomizing to SA Pt sites at high temperatures. High Pt NP loadings (e.g., 20%) tend to lead to the formation of highly ordered Pt3Co intermetallic NPs with excellent activity and enhanced stability toward the ORR. In contrast, at a relatively low Pt loading (<6 wt%), the formation of single Pt sites in the form of PtC3N is thermodynamically favorable, in which a synergy between the PtC3N and the CoN4 sites could enhance the catalytic activity for the ORR, but showing insufficient stability.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Periodic structural changes in Pd nanoparticles during oscillatory CO oxidation reaction

Tanmay Ghosh,Juan Manuel Arce-Ramos,Wen-Qing Li,Hongwei Yan,See Wee Chee,Alexander Genest,Utkur Mirsaidov

DOI: https://doi.org/10.1038/s41467-022-33304-x

IF: 17.694

2022-10-20

NanoScience and Technology

Abstract:Nanoparticle (NP) catalysts are ubiquitous in energy systems, chemical production, and reducing the environmental impact of many industrial processes. Under reactive environments, the availability of catalytically active sites on the NP surface is determined by its dynamic structure. However, atomic-scale insights into how a NP surface reconstructs under reaction conditions and the impact of the reconstruction on catalytic activity are still lacking. Using operando transmission electron microscopy, we show that Pd NPs exhibit periodic round–to–flat transitions altering their facets during CO oxidation reaction at atmospheric pressure and elevated temperatures. This restructuring causes spontaneous oscillations in the conversion of CO to CO 2 under constant reaction conditions. Our study reveals that the oscillatory behavior stems from the CO-adsorption-mediated periodic restructuring of the nanocatalysts between high-index-faceted round and low-index-faceted flat shapes. These atomic-scale insights into the dynamic surface properties of NPs under reactive conditions play an important role in the design of high-performance catalysts.
Role of Ptnc-FeOx metal-oxide interface in enhancing the catalytic activity for CO oxidation

LIU Chengyong,HUANG Li,SONG Xueyang,HE Wenxue,WANG Siyu,LONG Zhixin,SUN Zhihu,WEI Shiqiang

DOI: https://doi.org/10.11889/j.0253-3219.2021.hjs.44.010103

2021-01-01

Nuclear Techniques

Abstract:BackgroundMetal-oxide interface plays critical roles in promoting the catalytic activities of metal catalysts in a vast diversity of reactions. Maximizing this interfacial interaction so as to optimize the catalytic performance is an active subject of research that is worthy of intensive exploration.PurposeThis study aims to develop new Pt-group catalysts that are highly active towards cryogenic CO catalytic oxidation, and explore effective strategies to engineer metal-oxide (hydroxide) interfaces to weaken the adsorption of CO and to enhance the adsorption/activation of O2.MethodsSupported ultrasmall Pt nanoclusters (Ptnc-FeOx/SiO2) of (1.4±0.2) nm were synthesized using deposition-precipitation with urea (DPU). The catalytic performance towards CO oxidation was examined by using a fixed-bed U-shape flow quartz reactor. Extended X-ray absorption fine structure (EXAFS), in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), transmission electron microscopy (TEM), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), and energy-dispersive X-ray spectroscopy (EDX) techniques were combined to study the Ptnc-FeOx interfacial interaction.ResultsThe Ptnc-FeOx/SiO2 catalyst shows superior catalytic performance than Pt/SiO2 towards the CO oxidation reaction. Kinetics tests show that both the apparent activation energy and turnover frequency of Ptnc-FeOx/SiO2 are greatly enhanced as compared with Pt/SiO2 (19 kJ·mol-1 vs. 64 kJ·mol-1; 0.044 s-1 vs. 0.002 s-1 at 37 °C).ConclusionThe charge transfer from Fe to Pt results in the downshifted d-band center of Pt and reduces the CO adsorption strength, and hence, playing important roles in promoting the catalytic activity of Pt catalysts.
Getting Insights into the Temperature-Specific Active Sites on Platinum Nanoparticles for CO Oxidation: A Combined in Situ Spectroscopic and Ab Initio Density Functional Theory Study

Annai Liu,Xiao Liu,Lichen Liu,Yu Pu,Kai Guo,Wei Tan,Song Gao,Yidan Luo,Shuohan Yu,Rui Si,Bin Shan,Fei Gao,Lin Dong

DOI: https://doi.org/10.1021/acscatal.9b02552

IF: 12.9

2019-01-01

ACS Catalysis

Abstract:The geometrical structure of metal nanoparticles has been found to be a critical factor that can influence the catalytic behavior significantly. For typical metal nanoparticles, the exposed surface atoms usually exhibit different coordination environments among different surface sites. By in situ diffuse reflectance Fourier transform infrared spectroscopy, kinetic measurements, and DFT calculations, it has been found that, for Pt-catalyzed CO oxidation at different temperatures, CO reacts preferentially on different surface sites of Pt nanoparticles. At low temperatures, Pt species with higher coordination numbers (≥7-fold coordinated) present higher catalytic activities due to the lower CO adsorption energy. However, at high temperatures, especially beyond the ignition temperature, Pt species with lower coordination numbers (≤6-fold coordinated) play a predominant role because of their better capability for O2 activation.
Synergetic Effect Dependence on Activated Oxygen in the Interface of NiOx-modified Pt Nanoparticles for the CO Oxidation from First-Principles

Zihang Yao,Jiaqiang Yang,Zhang Liu,Bin Shan,Rong Chen,Yanwei Wen,Yanli Li

DOI: https://doi.org/10.1039/d1cp00149c

2021-01-01

Abstract:CO oxidation on NiOx-modified Pt nanoparticles (NPs) was investigated by first-principles calculations and microkinetic methods. The binding energies of O2 and CO on NiOx/Pt suggest that CO adsorption is dominant and the CO oxidation mainly follows the Mars-van Krevelen (M-vK) mechanism. It was found that the interfacial O of NiOx/Pt played a key role in the combination of adsorbed CO to O, as well as the O2 dissociation. With a lower O vacancy formation energy, NiOx/Ptedge shows about four orders higher reaction rates than NiOx/Pt(100). Microkinetic analysis suggests that the rate-determining step also depends on the active O at the interface. The calculations highlight the synergetic effect difference of NiOx selectively deposited on the different sites of Pt NPs on the CO oxidation from the atomic reaction mechanism, and throws light on the high activity of CO oxidation on partially covered NiOx/Ptedge nanoparticles.
Bimetallic synergy in cobalt–palladium nanocatalysts for CO oxidation

Cheng Hao Wu,Chang Liu,Dong Su,Huolin L. Xin,Hai-Tao Fang,Baran Eren,Sen Zhang,Christopher B. Murray,Miquel B. Salmeron

DOI: https://doi.org/10.1038/s41929-018-0190-6

IF: 37.8

2018-12-10

Nature Catalysis

Abstract:Bimetallic and multi-component catalysts typically exhibit composition-dependent activity and selectivity, and when optimized often outperform single-component catalysts. Here we used ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and in situ and ex situ transmission electron microscopy (TEM) to elucidate the origin of composition dependence observed in the catalytic activities of monodisperse CoPd bimetallic nanocatalysts for CO oxidation. We found that the catalysis process induced a reconstruction of the catalysts, leaving CoOx on the nanoparticle surface. The synergy between Pd and CoOx coexisting on the surface promotes the catalytic activity of the bimetallic catalysts. This synergistic effect can be optimized by tuning the Co/Pd ratios in the nanoparticle synthesis, and it reaches a maximum at compositions near Co0.24Pd0.76, which achieves complete CO conversion at the lowest temperature. Our combined AP-XPS and TEM studies provide direct observation of the surface evolution of the bimetallic nanoparticles under catalytic conditions and show how this evolution correlates with catalytic properties.

chemistry, physical
Revealing the Origin of Low-Temperature Activity of Ni-Rh Nanostructures during CO Oxidation Reaction with Operando TEM

Tanmay Ghosh,Xiangwen Liu,Wenming Sun,Meiqi Chen,Yuxi Liu,Yadong Li,Utkur Mirsaidov

DOI: https://doi.org/10.1002/advs.202105599

Abstract:In bimetallic heterostructured nanoparticles (NPs), the synergistic effect between their different metallic components leads to higher catalytic activity compared to the activity of the individual components. However, how the dynamic changes through which these NPs adopt catalytically active structures during a reaction and how the restructuring affects their activity are largely unknown. Here, using operando transmission electron microscopy, structural changes are studied in bimetallic Ni-Rh NPs, comprising of a Ni core whose surface is decorated with smaller Rh NPs, during a CO oxidation reaction. The direct atomic-scale imaging reveals that, under O2 -rich conditions, Ni core partially transforms into NiO, forming a (Ni+NiO)-Rh hollow nanocatalyst with high catalytic activity. Under O2 -poor conditions, Rh NPs alloy with the surface of the core to form a NiRh-alloy surface, and the NPs display significantly lower activity. The theoretical calculations indicate that NiO component that forms only under O2 -rich conditions enhances the activity by preventing the CO poisoning of the nanocatalysts. The results demonstrate that visualizing the structural changes during reactions is indispensable in identifying the origin of catalytic activity. These insights into the dynamic restructuring of NP catalysts under a reactive environment are critical for the rational design of high-performance nanocatalysts.
Synergetic Effect of Surface and Subsurface Ni Species at Pt-Ni Bimetallic Catalysts for Co Oxidation

Rentao Mu,Qiang Fu,Hong Xu,Hui Zhang,Yuying Huang,Zheng Jiang,Shuo Zhang,Dali Tan,Xinhe Bao

DOI: https://doi.org/10.1021/ja109483a

IF: 15

2011-01-01

Journal of the American Chemical Society

Abstract:Various well-defined Ni-Pt(111) model catalysts are constructed at atomic-level precision under ultra-high-vacuum conditions and characterized by X-ray photoelectron spectroscopy and scanning tunneling microscopy. Subsequent studies of CO oxidation over the surfaces show that a sandwich surface (NiO(1-x)/Pt/Ni/Pt(111)) consisting of both surface Ni oxide nanoislands and subsurface Ni atoms at a Pt(111) surface presents the highest reactivity. A similar sandwich structure has been obtained in supported Pt-Ni nanoparticles via activation in H(2) at an intermediate temperature and established by techniques including acid leaching, inductively coupled plasma, and X-ray adsorption near-edge structure. Among the supported Pt-Ni catalysts studied, the sandwich bimetallic catalysts demonstrate the highest activity to CO oxidation, where 100% CO conversion occurs near room temperature. Both surface science studies of model catalysts and catalytic reaction experiments on supported catalysts illustrate the synergetic effect of the surface and subsurface Ni species on the CO oxidation, in which the surface Ni oxide nanoislands activate O(2), producing atomic O species, while the subsurface Ni atoms further enhance the elementary reaction of CO oxidation with O.
Insights into the reaction mechanism and particle size effects of CO oxidation over supported Pt nanoparticle catalysts

Sarah Neumann,Torsten Gutmann,Gerd Buntkowsky,Stephen Paul,Greg Thiele,Heiko Sievers,Marcus Bäumer,Sebastian Kunz

DOI: https://doi.org/10.1016/j.jcat.2019.07.049

IF: 7.3

2019-09-01

Journal of Catalysis

Abstract:CO oxidation is an extensively studied reaction in heterogeneous catalysis due to its seeming simplicity and its great importance for emission control. However, the role of particle size and more specifically structure sensitivity in this reaction is still controversial. In the present study, colloidal "surfactant-free" Pt nanoparticles (NPs) in a size regime of 1–4 nm with narrow size distribution and control over particle size were synthesized and subsequently supported on Al2O3 to prepare model catalysts. CO oxidation was performed using Pt NPs catalysts with particles sizes of 1, 2, 3, and 4 nm at different reaction temperatures. It is shown that the reaction exhibits a particle size effect that depends strongly on the reaction conditions. At 170 °C, the reaction seems to proceed within the same kinetic regime for all particle sizes, but the surface normalized activity depends strongly on the particle size, with maximum activity for nanoparticles 2 nm in diameter. A temperature increase to 200 °C leads to a change of the kinetic regime that depends on the particle size. For Pt NPs 1 nm in diameter a reaction order of 1 for O2 was observed, indicating that O2 adsorbs molecularly and dissociates in a following step, which represents the generally accepted mechanism on Pt surfaces. The reaction order of −1 for CO demonstrates that the surface is saturated with CO under reaction conditions. With increasing particle size, the reaction orders of O2 and CO change. For particles 2 nm in size, an increase in temperature also results in reaction orders of 1 for O2 and −1 for CO; NPs of 3 and 4 nm, even at higher temperatures, show no clear kinetic behavior that can be explained by a single reaction mechanism. Instead, the Boudouard reaction between two adjacent adsorbed CO molecules was identified as an important additional reaction pathway that occurs preferentially on large particles and causes more complex kinetics.

chemistry, physical,engineering, chemical
Insights into Chemical Dynamics and Their Impact on the Reactivity of Pt Nanoparticles during CO Oxidation by Operando TEM

Milivoj Plodinec,Hannah C. Nerl,Frank Girgsdies,Robert Schlögl,Thomas Lunkenbein,Robert Schlögl

DOI: https://doi.org/10.1021/acscatal.9b03692

IF: 12.9

2020-02-19

ACS Catalysis

Abstract:The functionality of heterogeneous catalysts is influenced by a delicate interplay of multiple parameters, including morphology and structure, chemical potential gradients and related dynamics. Here, we report on how these factors are interconnected. Combining time-resolved transmission electron microscopy imaging and selected area electron diffraction with online conversion detection, CO oxidation over Pt nanoparticles was studied at a pressure of 700 mbar and temperatures up to 500 °C. The different interactions between reactants and catalysts over the entire range of catalytic conversion were investigated. Chemical dynamics in this reaction were found to consist of both morphological transformations and fluctuating structural dynamics. Morphological transformations were observed mostly in low activity regimes, leading to nanoparticles with increased stable surface facets. Meanwhile structural changes were observed during high activity regimes where the partial pressures remained constant. Furthermore, the observed changes were found to occur in both the bulk and the surface of the catalyst. Catalytic cycling revealed that morphological transformations and structural dynamics have different implications on the reactivity and are mostly irreversible.

chemistry, physical
Morphology-electronic effects in ultra-model nanocatalysts under CO oxidation reaction: the case of ZnO ultrathin films grown on Pt(111)

Hang Liu,Zhang Lei,Sébastien Lebègue,F. Bournel,Jean-Jacques Gallet,Ahmed Naitabdi

DOI: https://doi.org/10.1039/d4nr02935f

IF: 6.7

2024-10-03

Nanoscale

Abstract:The study of the surface morphology and interface of metal-oxides is crucial for understanding the behavior of these model systems as nanocatalysts. Besides, understanding the interplay between morphology, stability, and reactivity is crucial for designing efficient catalysts. Here, we investigated the stability and dewetting of ZnO ultrathin films on Pt(111) under CO oxidation conditions. For films < 1 monolayer (ML), CO-induced dewetting occurs at the metal-oxide interface or defects. The morphology, dependent on thickness, influences reactivity. (6x6) structures show greater CO binding and structural changes compared to (4x4) structures, which exhibit resilience due to Zn—OH formation. ZnO electronic properties, as revealed by Auger spectroscopy and scanning tunneling spectroscopy (STS) investigations, vary with thickness. Low-thickness films [< 2 Monolayers (ML)] exhibit metallic-like behavior, possibly due to Zn—Pt interaction, while thicker films show n-type semiconductor behavior with a bandgap opening (E_BG = 0.9 eV at 2 ML). DFT calculations of the local density of states (LDOS) as a function of ZnO thickness confirm the thickness-dependent electronic structure, with 0.3 ML films having a higher LDOS near the Fermi level than 1 ML films. These findings highlight the critical role of ZnO morphology in determining its stability and reactivity which opens up avenues for designing efficient and more stable ZnO-based nanocatalysts for a wide range of chemical reactions, including CO oxidation and CO2 hydrogenation.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Theoretical Study of the Role of a Metal–Cation Ensemble at the Oxide–Metal Boundary on CO Oxidation

Dapeng Sun,Xiang-Kui Gu,Runhai Ouyang,Hai-Yan Su,Qiang Fu,Xinhe Bao,Wei-Xue Li

DOI: https://doi.org/10.1021/jp300924k

2012-01-01

The Journal of Physical Chemistry C

Abstract:Identification of the active sites in heterogeneous catalysis is important for a mechanistic understanding of the structure-reactivity relationship and rationale of the design of new catalysts, but remains challenging. Among others, the boundaries at metal nanoparticles and supported oxides were found to be important and attributed to the active sites in various catalytic reactions. To reveal the nature of the active sites at the boundaries, the catalytic role of the inverse 3d transition-metal oxide nanoislands on Pt(111) for low-temperature CO oxidation was studied by density functional theory calculations. A characteristic Pt-cation ensemble at the oxide/metal boundaries as the active sites is identified. In Pt-cation ensembles, coordinate-unsaturated (CUS) cations exposed at the edges of oxide nanoislands are highly active for O-2 adsorption and dissociation, and less-reactive Pt binds modestly with dissociated O responsible for the facile CO oxidation. Inverse VIIIB-oxide/Pt boundaries exhibit high activities for low-temperature CO oxidation, and the corresponding activity decreases gradually from Fe to Co to Ni. The results rationalize a wide range of the experimental findings. To take advantage of the high oxidizing activity of low-valent VIIIB cations, FeO/Pt and CoO/Pt catalysts are appropriate for the reactions under oxygen-poor conditions, whereas NiO/Pt for the reactions under oxygen-rich conditions. The dependence of the activity and valence state of the Pt-cation ensemble at the oxide/metal boundaries is discussed, and the insight of the metal-cation ensemble as the active sites is highlighted.
Pt-Embedded CuO X-Ceo2 Multicore-Shell Composites: Interfacial Redox Reaction-Directed Synthesis and Composition-Dependent Performance for CO Oxidation.

Ke Wu,Xin-Pu Fu,Wen-Zhu Yu,Wei-Wei Wang,Chun-Jiang Jia,Pei-Pei Du,Rui Si,Yu-Hao Wang,Lin-Dong Li,Liang Zhou,Ling-Dong Sun,Chun-Hua Yan

DOI: https://doi.org/10.1021/acsami.8b10496

IF: 9.5

2018-01-01

ACS Applied Materials & Interfaces

Abstract:Exploring the state-of-the-art heterogeneous catalysts has been a general concern for sustainable and clean energy. Here, Pt-embedded CuO x-CeO2 multicore-shell (Pt/CuO x-CeO2 MS) composites are fabricated at room temperature via a one-pot and template-free procedure for catalyzing CO oxidation, a classical probe reaction, showing a volcano-shaped relationship between the composition and catalytic activity. We experimentally unravel that the Pt/CuO x-CeO2 MS composites are derived from an interfacial autoredox process, where Pt nanoparticles (NPs) are in situ encapsulated by self-assembled ceria nanospheres with CuO x clusters adhered through deposition/precipitation-calcination process. Only Cu-O and Pt-Pt coordination structures are determined for CuO x clusters and Pt NPs in Pt/CuO x-CeO2 MS, respectively. Importantly, the close vicinity between Pt and CeO2 benefits to more oxygen vacancies in CeO2 counterparts and results in thin oxide layers on Pt NPs. Meanwhile, the introduction of CuO x clusters is crucial for triggering synergistic catalysis, which leads to high resistance to aggregation of Pt NPs and improvement of catalytic performance. In CO oxidation reaction, both Ptδ+-CO and Cu+-CO can act as active sites during CO adsorption and activation. Nonetheless, redundant content of Pt or Cu will induce a strongly bound Pt-O-Ce or Cu-[O x]-Ce structures in air-calcinated Pt/CuO x-CeO2 MS composites, respectively, which are both deleterious to catalytic reactivity. As a result, the composition-dependent catalytic activity and superior durability of Pt/CuO x-CeO2 MS composites toward CO oxidation reaction are achieved. This work should be instructive for fabricating desirable multicomponent catalysts composed of noble metal and bimetallic oxide composites for diverse heterogeneous catalysis.
Phase Segregation in PdCu Alloy Nanoparticles During CO Oxidation Reaction at Atmospheric Pressure

Yingying Jiang,Alvin M. H. Lim,Hongwei Yan,Hua Chun Zeng,Utkur Mirsaidov

DOI: https://doi.org/10.1002/advs.202302663

IF: 15.1

2023-06-29

Advanced Science

Abstract:This study with operando transmission electron microscopy approach shows that during a CO oxidation reaction over PdCu alloy nanoparticles, selective oxidation and segregation of Cu transform the nanoparticles into very stable and active Pd–CuO nanocatalysts for CO to CO2 conversion reaction. Bimetallic nanoparticle (NP) catalysts are widely used in many heterogeneous gas‐based reactions because they often outperform their monometallic counterparts. During these reactions, NPs often undergo structural changes, which impact their catalytic activity. Despite the important role of the structure in the catalytic activity, many aspects of how a reactive gaseous environment affects the structure of bimetallic nanocatalysts are still lacking. Here, using gas‐cell transmission electron microscopy (TEM), it is shown that during a CO oxidation reaction over PdCu alloy NPs, the selective oxidation of Cu causes the segregation of Cu and transforms the NPs into Pd–CuO NPs. The segregated NPs are very stable and have high activity for the conversion of CO into CO2. Based on the observations, the segregation of Cu from Cu‐based alloys during a redox reaction is likely to be general and may have a positive impact on the catalytic activity. Hence, it is believed that similar insights based on direct observation of the reactions under relevant reactive conditions are critical both for understanding and designing high‐performance catalysts.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Site‐Resolved Cu2O Catalysis in the Oxidation of CO

Zhenhua Zhang,Hong Wu,Zongyou Yu,Rui Song,Kun Qian,Xuanye Chen,Jie Tian,Wenhua Zhang,Weixin Huang

DOI: https://doi.org/10.1002/anie.201814258

2019-01-01

Angewandte Chemie

Abstract:The identification of the contribution of different surface sites to the catalytic activity of a catalyst nanoparticle is one of the most challenging issues in the fundamental studies of heterogeneous catalysis. We herein demonstrate an effective strategy of using a series of uniform cubic Cu2O nanocrystals with different sizes to identify the intrinsic activity and contributions of face and edge sites in the catalysis of CO oxidation by a combination of reaction kinetics analysis and DFT calculations. Cu2O nanocrystals undergo insitu surface oxidation forming CuO thin films during CO oxidation. As the average size of the cubic Cu2O nanocrystals decreases from 1029nm to 34nm, the dominant active sites contributing to the catalytic activity switch from face sites to edge sites. These results reveal the interplay between the intrinsic catalytic activity and the density of individual types of surface sites on a catalyst nanoparticle in determining their contributions to the catalytic activity.
Adrenal-preserving laparoscopic surgery in selected patients with bilateral adrenal tumors.

M. Iihara,Rumi Suzuki,A. Kawamata,Yoko Omi,Hitomi Kodama,Yuka Igari,K. Yamazaki,T. Obara

DOI: https://doi.org/10.1016/J.SURG.2003.07.027

IF: 4.348

2003-12-01

Surgery

Abstract:
Oxidation of Platinum Surfaces and Reaction with Carbon Monoxide

Wei-Xue Li

DOI: https://doi.org/10.1088/0953-8984/20/18/184022

2008-01-01

Journal of Physics Condensed Matter

Abstract:Identification of structures of active sites of catalysts under realistic conditions is key for understanding the structure–reactivity relationship and mechanism of catalytic reactions. Various in situ techniques and novel theoretical concepts (e.g. ab initio atomistic thermodynamics) have been developed. As an example, oxidation of stepped Pt(110) and Pt(332) surfaces has been studied using density functional theory, scanning tunneling microscopy and high resolution x-ray photoemission spectroscopy. It was found that ridge Pt atoms are highly reactive and one-dimensional (1D) oxide stripes form along the Pt ridge. Within the 1D oxide stripes, the reactivity is low, and reaction occurs only at the defect sites and/or boundaries of 1D PtO2 stripes. Furthermore, for stepped Pt(332) surfaces, a site highly active in promoting carbon monoxide (CO) oxidation was identified due to the formation of novel transition states at the boundary of the 1D oxide and chemisorption domains. Since the ratio of the ridge atoms increases with decrease of the particle sizes, the present study highlights the importance of the 1D oxide components for the reactivity of supported nanosize catalysts.

A Scalable and Performant Grid Monitoring Framework

Strong Local Coordination Structure Effects on Subnanometer PtOx Clusters over CeO2 Nanowires Probed by Low-Temperature CO Oxidation

Structural changes in noble metal nanoparticles during CO oxidation and their impact on catalyst activity

Identification of Active Sites in Pt–Co Bimetallic Catalysts for CO Oxidation

Atomic Structure Evolution of Pt–Co Binary Catalysts: Single Metal Sites versus Intermetallic Nanocrystals

Periodic structural changes in Pd nanoparticles during oscillatory CO oxidation reaction

Role of Ptnc-FeOx metal-oxide interface in enhancing the catalytic activity for CO oxidation

Getting Insights into the Temperature-Specific Active Sites on Platinum Nanoparticles for CO Oxidation: A Combined in Situ Spectroscopic and Ab Initio Density Functional Theory Study

Synergetic Effect Dependence on Activated Oxygen in the Interface of NiOx-modified Pt Nanoparticles for the CO Oxidation from First-Principles

Bimetallic synergy in cobalt–palladium nanocatalysts for CO oxidation

Revealing the Origin of Low-Temperature Activity of Ni-Rh Nanostructures during CO Oxidation Reaction with Operando TEM

Synergetic Effect of Surface and Subsurface Ni Species at Pt-Ni Bimetallic Catalysts for Co Oxidation

Insights into the reaction mechanism and particle size effects of CO oxidation over supported Pt nanoparticle catalysts

Insights into Chemical Dynamics and Their Impact on the Reactivity of Pt Nanoparticles during CO Oxidation by Operando TEM

Morphology-electronic effects in ultra-model nanocatalysts under CO oxidation reaction: the case of ZnO ultrathin films grown on Pt(111)

Theoretical Study of the Role of a Metal–Cation Ensemble at the Oxide–Metal Boundary on CO Oxidation

Pt-Embedded CuO X-Ceo2 Multicore-Shell Composites: Interfacial Redox Reaction-Directed Synthesis and Composition-Dependent Performance for CO Oxidation.

Phase Segregation in PdCu Alloy Nanoparticles During CO Oxidation Reaction at Atmospheric Pressure

Site‐Resolved Cu2O Catalysis in the Oxidation of CO

Adrenal-preserving laparoscopic surgery in selected patients with bilateral adrenal tumors.

Oxidation of Platinum Surfaces and Reaction with Carbon Monoxide