Abstract:Electrochemical nitrate reduction is considered a promising energy efficient approach to remove environmentally harmful nitrate from various types of wastewater while simultaneously producing a product with high added value: ammonia. One important factor to be accounted for is the choice of the catalyst, which is required not only to accelerate nitrate reduction but also to direct the product selectivity of the electrolysis toward ammonia production. To this end, herein, we demonstrate the fabrication of novel Ni foam catalysts produced by means of a dynamic hydrogen bubble template and additive assisted electrodeposition process. The resulting 3D foam morphology of the catalyst is demonstrated to crucially govern its overall catalytic performance. Post-electrolysis cross-sectional SEM-EDX analysis (K mapping) demonstrated complete wetting of the 3D foam structure by the electrolyte. Ni foams deposited within 20 s exhibited outstanding selectivity toward nitrate electroreduction: more than 95% of the Faradaic efficiency of ammonia production was achieved in the particularly low potential range from -0.1 to -0.3 V vs. RHE. Hydrogen was found to be the only minor by-product of the nitrate reduction. Intriguingly, no other nitrogen containing products (e.g., NO, N2O, and N2) formed during electrolysis, thus indicating a highly efficient nitrate-to-ammonia conversion process. This significant improvement over the use of a planar Ni foil reference (33% FE at -0.3 V vs. RHE) is attributable to (i) the effective suppression of the HER in this potential regime and (ii) a high surface density of active sites for the nitrate reduction formed during Ni foam electrodeposition under extreme experimental conditions, e.g., at an applied geometric current density of -3 A cm-2. Trapping intermediates inside the primary macroporosity contributed to the excellent catalytic performance of the Ni foams. Identical location (IL) SEM analyses demonstrated the excellent structural stability of the novel Ni foam during extended catalyst stressing. These superior characteristics have not previously been reported for Ni and Ni rich catalysts, thus making the novel foam type of catalyst a highly promising candidate for truly selective and energy efficient nitrate-to-ammonia electroreduction and a promising alternative to mature copper-based catalysts.

Preparation of Highly Effective Ni Foam Monolithic Catalysts by Electrolytic Deposition for Nitrobenzene Hydrogenation in a Micropacked Bed

Preparation of Pd/Al2O3/Nickel Microfoam Catalysts by Electrodeposition for Hydrogenation in a Micropacked Bed Reactor

Nickel Nanoparticles Embedded in Porous Carbon-Coated Honeycomb Ceramics: A Potential Monolithic Catalyst for Continuous Hydrogenation Reaction

Investigation of Hydrogenation and Mass Transfer Performance in Micropacked Beds with Highly Active Monolithic Catalysts

Electrodeposition of Activated Carbon on Ni Foam for Monolithic Catalysts and Intensification of Hydrogenation Performance in a Micropacked Bed

Preparation of Pd/γ-Al2O3/nickel foam monolithic catalyst and its performance for selective hydrogenation in a rotating packed bed reactor

Plastering Sponge with Nanocarbon-Containing Slurry to Construct Mechanically Robust Macroporous Monolithic Catalysts for Direct Dehydrogenation of Ethylbenzene

Self-supported nanoporous CuNiAl alloy as highly efficient electrocatalyst for nitrobenzene hydrogenation to aniline

Beyond Copper: Novel Ni Foam Catalysts for Sustainable Nitrate to Ammonia Electroreduction

In Situ Growth of MoN on Nickel Foam for Highly Efficient Hydrogen Evolution in Alkaline Solution

Controllable Preparation of Nano-Ni to Eliminate Step Edges of Carbon Deposition on Ni-Based Catalysts for Methane Dry Reforming

Copper-nickel-MOF/nickel foam catalysts grown in situ for efficient electrochemical nitrate reduction to ammonia

In situ growth of iron incorporated Ni3S2 nanosheet on nickel foam in mediating electron transfer to peroxymonosulfate for pollutant abatement

Cobalt Nickel Nitrogen Array as a Easily Eecoverable, Effective Catalyst for Liquid-Phase Catalytic Reaction with Remarkable Recycled Stability

Supported Ni Catalysts: Simple Vapor Deposition Preparation Method and Improved Catalytic Performance for Oxidative Dehydrogenation of Ethane

Foamed Ceramic Based Γ-Al₂o₃ Coated Catalysts with Different Preparation Methods for Ethyl Nicotinate Hydrogenation Reaction

Preparation of 3D electrocatalysts and catalysts for gas-phase reactions, through electrodeposition or galvanic displacement

In-situ assembly of 2D/3D porous nickel cobalt sulfide solid solution as superior pre-catalysts to boost multi-functional electrocatalytic oxidation

Nitrile Butadiene Rubber Hydrogenation over a Monolithic Pd/CNTs@Nickel Foam Catalysts: Tunable CNTs Morphology Effect on Catalytic Performance

Pore Confinement Strategy to Construct Uniformly-Sized Ni on Carbon Nanosheets for Exceptional Catalytic Hydrogenation

Novel TPMS carbon-based monolithic catalysts by three-dimensional printing for enhancement of nitrobenzene hydrogenation reaction