Abstract:Dry reforming of methane (DRM) is one of the most valuable ways to convert carbon dioxide (CO2) and methane (CH4) simultaneously. Although Ni-based catalysts have been widely used due to their high activity and low cost, the problems with sintering and carbon deposition have consistently limited their large-scale industrial applications. In this work, based on the high surface area and excellent adsorption capacity of porous Al2O3 material, three kinds of rod-like Ni- Al2O3 catalysts (Ni- Al2O3-500, Ni-Al2O3-700, Ni-Al2O3-900) were successfully synthesized by impregnation strategy and calcination at 500, 700 and 900 °C respectively. During the 60-h stability test, the conversions of CH4 and CO2 catalyzed by the Ni-Al2O3-700 catalyst with 3% Ni was consistently maintained at around 60.0% and 65.0%, respectively, with only 5.8% residual carbon on the catalyst surface. According to the analysis of Temperature programmed reduction (H2-TPR), X-ray photoelectron spectroscopy (XPS), Temperature programmed deposition (CO-TPD) and the test results, the influence of calcination temperature on the catalytic performance of Ni-Al2O3 catalyst was comprehensively studied. Under different calcination temperatures, the interaction between Ni species and porous Al2O3 support was successfully regulated. Different from introducing more favorable chemical components to the catalyst system, this work created a rod-like Ni-Al2O3-700 catalyst with excellent resistance to carbon deposition and sintering and a higher ratio of Ni0/Ni2+ (0.044) based on the calcination temperature and the changes of microstructure during the phase transition of Al2O3 materials, which provided a new strategy for constructing a structured and high-performance Ni-based catalyst.

Supported Ni Catalysts: Simple Vapor Deposition Preparation Method and Improved Catalytic Performance for Oxidative Dehydrogenation of Ethane

Acid-Resistant Performance of Ni-Based Hydrogenation Catalysts Supported by Hydrophobic Activated Carbon

Preparation of Supported Skeletal Ni Catalyst and Its Catalytic Performance on Dicyclopentadiene Hydrogenation

Sn Modified Carbon Support PdCo Bimetallic Oxide for Boosting Low-Temperature Dehydrogenation of Dodecahydro-N-ethylcarbazole

Partial Oxidation Of Methane To Syngas Over Ni-Based Catalysts

Controllable Preparation of Nano-Ni to Eliminate Step Edges of Carbon Deposition on Ni-Based Catalysts for Methane Dry Reforming

Ultra‐small Metallic Nickel Nanoparticles on Dealuminated Zeolite for Active and Durable Catalytic Dehydrogenation

In Situ Thermal Atomization to Convert Supported Nickel Nanoparticles into Surface‐Bound Nickel Single‐Atom Catalysts

Preparation of Hydrothermally Stable, Basic, and Highly Active Nano Nickel Catalysts for the Hydrodeoxygenation of N,N-dimethylformamide

Ni-Based Catalysts Supported on Nanodiamonds for Phenol Hydrogenation: The Effect of Support Surface Treatment on the Catalytic Performance

Catalytic Methanation of Syngas over Ni-based Catalysts with Different Supports

Two-Step, Oxygen-Free Conversion of Methane over Supported NiB Amorphous Alloy Catalysts

Improved performance of Ni/Al2O3 catalyst deriving from the hydrotalcite precursor synthesized on Al2O3 support for dry reforming of methane

Atomically Dispersed Ni-Based Anti-Coking Catalysts for Methanol Dehydrogenation in a Fixed-Bed Reactor

A Supported Nickel Catalyst Stabilized by a Surface Digging Effect for Efficient Methane Oxidation

Pursuing Complete and Stable Steam Reforming of N-Dodecane over Nickel Catalysts at Low Temperature and High LHSV

Robust nanosheet-assembled Al 2 O 3 -supported Ni catalysts for the dry reforming of methane: the effect of nickel content on the catalytic performance and carbon formation

Unveiling the Origin of Enhanced Catalytic Performance of NiCu Alloy for Semi-Hydrogenation of Acetylene

An efficient NiCu@C/Al 2 O 3 catalyst for selective hydrogenation of acetylene

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane

Exploring the Influence of Nickel Precursors on Constructing Efficient Ni-based CO2 Methanation Catalysts Assisted with In-Situ Technologies