Abstract:Production of substitute natural gas (SNG) by methanation of syngas generated from various carbon sources provides a promising route towards coal clean utilization and sustainable energy future. Monolithic Ni (or Cu, NiCu-alloy)-foam-structured Ni-Al2O3 catalysts were developed by a facile modified wet chemical etching method. The as-prepared catalysts were characterized by X-ray diffraction, scanning electron microscopy, inductively coupled plasma atomic emission spectrometry and H-2-temperature programmed reduction. Among these catalysts, Ni-Al2O3/Ni-foam has the most surface active Ni atoms and exhibits the best catalytic methanation performance, achieving 99.9% CO conversion with 90.0% methane selectivity and being stable for at least 1000 h for a feed gas of H-2/CO (3/1) at 330 degrees C and gas hourly space velocity (GHSV) of 5000 h(-1). Effects of reaction temperature, reaction pressure and GHSV are also investigated on the catalytic performance of Ni-Al2O3/Ni-foam for CO methanation. Computational fluid dynamics calculation and experimental measurement consistently show that such monolithic Ni-Al2O3/Ni-foam can dramatically reduce the "hotspot" temperature due to its high thermal conductivity. Moreover, the feasibility of our Ni-Al2O3/Ni-foam catalyst for co-methanation of a simulated feed gas from coal gasification is studied as well as CO2 methanation in the presence of high CH4 concentration. We anticipate that our present work might stimulate commercial exploitation of the new-generation structured catalyst and reactor technology for the strongly exothermic syngas methanation toward energy-efficient process for SNG production. (C) 2015 Elsevier B.V. All rights reserved.

Catalytic Methanation of Syngas over Ni-based Catalysts with Different Supports

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Partial Oxidation Of Methane To Syngas Over Ni-Based Catalysts

Study on Methanation Performance of Biomass Gasification Syngas Based on a Ni/Al2O3 Monolithic Catalyst

High Temperature Methanation over Ni Catalysts Supported on High Surface Area ZnxMg1-xAl2O4: Influence on Zn Loading

Catalytic Methanation of CO2 over Ni Supported on Acidation Bentontie and Alkalization Bentontie

Ni–Al2O3 Catalysts Prepared by Solution Combustion Method for Syngas Methanation

Ni Based Catalysts Supported on Ce Modified MgAl Spinel Supports for High Temperature Syngas Methanation

Mesoporous Ce-Zr Solid Solutions Supported Ni-based Catalysts for Low-Temperature CO2 Methanation by Tuning the Reaction Intermediates

CO2 Methanation over the Ni-based Catalysts Supported on the Hollow ZSM-5 Zeolites: Effects of the Hollow Structure and Alkaline Treatment

Synergistic effect of Ni and NiO in hydrogen reduction for CO methanation

CO<sub>2</sub> methanation over Ni/ZSM-5 catalysts: The effects of support morphology and La<sub>2</sub>O<sub>3</sub> modification

Ni-based catalysts derived from Ni-Zr-Al ternary hydrotalcites show outstanding catalytic properties for low-temperature CO<sub>2</sub> methanation

CO2 methanation over Ni/ZSM-5 catalysts: The effects of support morphology and La2O3 modification

Progress in Ni-Based Catalysts for CO Methanation

High-Stability ZnAl2O4 Spinel-Supported Nickel Catalyst for High-Temperature Syngas Methanation

CO2 Methanation over Nickel-Based Catalysts Supported on MCM-41 with in Situ Doping of Zirconium

Antisintering and High-Activity Ni Catalyst Supported on Mesoporous Silica Incorporated by Ce/Zr for CO Methanation

Study on CO2 reforming of methane to syngas over Al 2O3-ZrO2 supported Ni catalysts prepared via a direct sol-gel process

Metal-foam-structured Ni–Al2O3 Catalysts: Wet Chemical Etching Preparation and Syngas Methanation Performance

Insight and comprehensive study of Ni-based catalysts supported on various metal oxides for CO2 methanation